The classic Onki running board, introduced under the American Runner brand, is installer friendly and has all the features consumers demand. With a size range of 52"-118" to fit most trucks, SUV's, and vans. The zinc coated "Smart Brackets" mount to the vehicle's frame and pinch weld for rock solid support. Top and bottom illumination with four path lights complete with pre-wired relay harness is the ultimate in night time safety coupled with high traction non-slip rubber surface. Also available in non-lighted models for the all black look.
The classic Onki running board, introduced under the American Runner brand, is installer friendly and has all the features consumers demand. With a size range of 52"-118" to fit most trucks, SUV's, and vans. The zinc coated "Smart Brackets" mount to the vehicle's frame and pinch weld for rock solid support.
All the bells and whistles have been combined in this latest addition to the Onki stable of running boards. The American Runner Stainless Steel Running Board, AR-S, comes fully loaded with the following features:
4 path lights on each board for top and bottom visibility(available as a lighted model only)
Distinguished by its 3" stainless steel wrap-around side cap, the Onki Nerf Board gives truck enthusiasts the traditional Nerf bar look with the added safety of a full 6 1/2" wide step covered with a high traction non-slip rubber surface. The Onki Nerf Board has all the other outstanding features of an Onki running board that you have come to expect:
The design and name of the Onki VOLCANO were inspired by the numerous volcanoes and lava flows found in Hawaii. The multiple traction holes strategically laid out on the 6 ½" wide top step of the board look like miniature volcanoes. The openings provide an engineered traction design on the metal sheet itself for basic safety. Additional traction comes from the replaceable black/orange rubber pads that also give the boards a more finished look. The Onki VOLCANO will be initially available in 7 lengths: 100”, 88”, 78”, 68”, 55”, 37”, and 21”. As has been our practice, all Onki VOLCANO running board sets come with our universal bracket kit.
It has taken a little bit of time but time well worth the wait. Onki is proud to introduce the latest in its running board lines, the all-new: Onki VOLCANO.
The Onki VOLCANO was conceived to be a price point model using lightly textured black powder coated mild steel as the main material with a 3 inch half tube on the leading edge for the traditional nerf tube look with the safety of a full step board. One can say that the Onki VOLCANO is the budget version of our top-selling Onki Nerf Board model, this time with a trapezoidal end cut.
A whole lot of cutting edge technology has gone into the Onki Full Stainless brush guard. The unparalleled combination of oversized T-304 stainless steel tubes, hidden weld technology, polished mirror finish, and vehicle specific wrap-around design has resulted in the handsome, beefy, and unique look of the Onki brush guard. An easy to assemble modular system plus a limited lifetime warranty equals to a sure winner.
A few years back, Onki is introducing the next generation Gen2 brush guard line that has the same original design, quality, strength, and durability of the Onki T-304 all stainless steel model with some slight modification. With the Onki Gen2 brush guards, the uprights and brackets now come in electro-painted heavy gauge steel, resulting in a substantially more affordable price. If this were not pointed out, no would even notice the difference except where it counts the most - the pocket.
Our customers have spoken and we have listened. Introducing the new Onki Aegis Center Guard - all the protection sans the light wings. The Aegis Center Guard is Onki's unique version of a Bull Bar / A-Bar combination. The minimalist treatment with fog light receptacles of an A-bar combined with the beefier design of a bull bar complete with three quarter height solid uprights. Of course, Onki's signature wrap around design, to conform with the contour and angle of the hood and grill design of the specific vehicle, has been kept resulting in a form-fitting product. Mirror-polished T-304 stainless steel remains the material of choice for the Aegis Center Guard.
Chrome over T-202 stainless steel is the way to go especially when dealing with exhaust tips. Stainless steel for rust-free performance and chrome overlay for easy to maintain shine. Onki exhaust tips come with round, slant cut, rolled lip tips available in 4, 5, and 6" outlet diameters. No need to weld, available with bolt-on stainless steel clamps. Now also available with 2 weld-on models.
Another high quality apperarance product has just been added to the Onki stable of exhaust tips for trucks and SUV's. Introducing the all-new Onki R90 radiused exhaust tips. First exhibited at the 2004 SEMA show in Las Vegas, Nevada, the R90 showcases it's unique corner hugging design - hence the R90 name. Availiable in single and dual exhaust configurations to fit most trucks and SUV's. As with Onki's round exhaust tips, the R90 comes in chrome over T-202 stainless steel.
There is a heap of Hummer H2 aluminum accessories out there. In a strength match between aluminum and stainless steel, the obvious winner would of course be stainless steel. That is why Onki is one of the few accessory manufactures that has picked stainless steel as the material of choice for its Hummer H2 mirror polished finish, stainless steel accessory line. Choose from Onki's OEM style brush guards, tow hooks, fog light brackets, rear bumper badges, hitch cover, and rear tail light guards. You can't go wrong with Onki.