The Nissan 350Z is a fun car to drive around. This car has a strong engine, low-slung body and sharp handling. If you are looking for a sporty muscular car, this is it. It also has a strong towing capability courtesy of its powerful engine. For such a vehicle, you need a quality trailer hitch to avoid unexpected breakdowns in the middle of the road. CARiD’s products have stood the test of time and you would be in the best position if you picked a hitch from them. The type of hitch you select will depend on your car’s towing ability and the size of your trailer. You must avoid the temptation of towing a trailer above your car’s weight class because this could easily damage your vehicle. You also need to consider the distribution across the trailer before you embark on your journey. Improper weight distribution has been cited as one of the major causes of trailer-related incidents on the road.
Weight-carrying hitches and weight-distribution hitches are designed for use on small and medium trailers. Trailers typically dump 10% of their weight on the tongue of the trailer. Weight–carrying hitches transfer the entire tongue weight on the rear axle causing the back to be heavy and the front tires light. This creates steering difficulties for the driver. In such a case, you need to use an equalizing hitch which pushes forward some of the trailer weight to the front tires. Nissan 350Z trailer hitches are easy to install. You see, each trailer hitch is designed to fit specifically on a particular car make and model. As such, there is a hitch designed to fit the Nissan 350Z perfectly. You only need to bolt it right onto the vehicle without any resistance. With a trailer hitch from CARiD, you have no need to worry because each hitch comes with a nationwide limited warranty.
Here at CARiD we have a loyal set of customers, and they are very involved with their cars. That means using them in many ways, or racing them or towing them to car shows on trailers. They know towing, is what we’re saying. And 32 of them left a number of reviews with an average rating of 4.5 out of 5 stars. We know you’ll feel the same way after towing your toys around, whether it’s a race car, a trailer full of quads or motorcycles or personal watercraft or full-on camper. CARiD has the parts you need to support your hobby!
- Bolt Lock® - Trailer Hitch Pin LockStarting at: $29.99$29.99
- CURT® - Rear Trailer Hitch with Receiver OpeningStarting at: $148.69$148.69
- Bully® - Chrome Hitch Cover with Nissan LogoStarting at: $28.06$28.06
- Autogold® - Chrome Hitch Cover with Nissan LogoStarting at: $34.40$34.40
Posted by Zachary W.
"Took a little longer than expected to arrive, but my guess is that it was due to the heavy weight of the box. Item arrived undamaged, though I doubt it would have made a difference in this case. Installation was mostly straightforward except for one issue, a muffler bracket was slightly in the way preventing the holes from lining up perfectly. I had to use a grinder to notch the corner of the bracket to accommodate, but 10 minutes later after the notch and a blast from a can of rustoleum spray paint the first side was bolted in no problem. On my Rogue particularly one side of the existing frame holes were rusted and took quite a bit of cleaning out to be able to thread the provided bolts, but that was my car's issue and nothing to do with the product. All in all, installation on this is definitely above beginner as the need for breaker bar to loosen old rusted bolts and need to slightly modify the product with tools that the average Joe may not have puts this solidly in the "intermediate" category in my opinion. Otherwise the item is solid and well built, definitely can take the rated load, and once modified fit perfectly to the existing bolt holes in the frame. I'm completely satisfied with the product at the price paid."
Posted by Richard M.
"Cool accessory for my Armada."
Posted by Jose B.
"Its primary use is to protect the bumper on my SUV, also adds a good looks to it."
Posted by David T.
"Very pleased with the service and quality of the product."
Posted by Linda P.