A: Mr. Gasket offers CopperSeal exhaust gaskets, which are manufactured from dead soft (solid) .043” thick copper material, with a .051” embossment around each exhaust port to seal irregular surfaces. Total gasket thickness is .094”. These are used for high-performance street, drag race, oval track and turbo-charged (extreme heat) applications and available in various port sizes.
Mr. Gasket also offers Aluminum Layered exhaust gaskets, which are manufactured from dead soft aluminum that is .125” thick and compressed down to .060” to create a tight leak-proof seal. These are used for high performance street, drag race and oval track use.
A: it is.048”.
A: 1975-1985: Mr. Gasket #6560 (fits left hand and right hand dipsticks). 1986-97: Mr. Gasket #6561
A: These are a cap covers that fit over your factory valve cover so no grommets are necessary.
A: Mr. Gasket #9704G will work for most car applications. Mr. Gasket does not have longer dipsticks used in vans.
A: Mr. Gasket #9704G will work for most car applications. We do not have longer dipsticks used in vans.
A: No, the pumps do not hold pressure when off and fuel cannot flow without pressure.
A: Mr. Gasket #5960 and #5961 are rated at 1400 degrees.