Kia Sorento Accessories & Parts

Categories

The mid-size crossover Kia Sorento has been produced and marketed by Kia Motors since 2002. The first generation was offered as a compact 4-door SUV with a standard five-speed manual transmission and optional four-speed automatic transmission. The Kia Sorento is available in two trim levels: LX and EX. The power comes from a 3.5L 24 valve DOHC V6 engine rated at 192 hp. Thanks to the automatic 4 wheel drive system, the Kia Sorento is very capable off-road. The vehicle is equipped with front and rear side curtain airbags and dual front airbags. The optional features are anti-lock braking system and the Torque-on-Demand automatic full-time four wheel drive. The Sorento family standard features are 4 wheel disc brakes, the battery saving feature, ladder frame design, used often in truck construction. This adds a rigidity to the Kia Sorento compared with other vehicles in its class. In 2007 Kia Sorento came with a 3.8L Lambda engine producing 262 hp, and standard for all trims 5 speed Sportmatic tip-tronic automatic transmission. According to the U.S. Department of Transportation (NHTSA), the 2007 Kia Sorento received the highest 5-star crash safety rating.

The second generation Kia Sorento debuted at the New York Auto Show in March 2009. The vehicle is the first model of Kia to be produced in the United States. It was the return of a 4-cylinder model to the North American models lineup since the period of its absence during 2007-2010. The new Kia Sorento came on sale as a 2011 model. The body on frame SUV construction of the first-generation model is replaced with a unibody crossover construction. The straight-up SUV model is replaced with a new car-truck crossover. The suspension is fully independent versus the live rear-axle in the previous model. Due to the change of the frame construction, the Sorento weighed 475 pounds less versus the previous model and that improves its performance and fuel economy. The new Kia Sorento is lighter, faster, and more efficient than it used to be. The 2011 Sorento comes in 11 trims, ranging from the Base model to the SX AWD. The Base models S, LX and EX I4 come with a 2.4-liter I4 engine producing 175 hp. The new SX model is available with a 3.5-liter V6 engine rating at 276 hp. A new 6-speed automatic transmission with Sportmatic is standard.

The Korean automaker has reinvented its brand and vehicles. As a result of these changes, the 2011 Kia Sorento received a new look, new cabin technologies and a new crossover architecture. The vehicle features Kia's new bowtie grille, known as the Tiger Nose and designed by Peter Schreyer, the company's design chief. The Kia Sorento exterior parts are angular and aggressive, but at the same time quite youthful. The Sorento's lower edge is wrapped with a black plastic trim that conveys a sporty look. The Kia Sorento is the first vehicle provided with an advanced Kia UVO system. The Kia Sorento EX V6 model received the excellent overall score by American Consumer magazine.

The Sorento has seen itself become more and more involved in the conversation of "best overall crossover." That is not a mistake. The Kia Sorento is in a class of its own, hosting outstanding interior refinements, from spacious legroom to the cubic feet of cargo availability. Kia exterior parts combine ruggedness and contemporary sleekness, and that is perhaps why a vast range of drivers find Kia to be so visually appealing. It performs with just the right punch and smoothness to hang with the big boys, but doesn't overdo itself with increased drag and noise. Inside and out, the Sorento simply impresses, especially when it is equipped with the right accessories.

Your sporty SUV is never the same once you hook up with top-quality Kia Sorento Accessories and Parts! At CARiD.com, we're devoted to stocking our inventory full of the kind of workmanship and variety that makes sense. Inside our selection of Kia Sorento accessories and parts, you've got a whole host of choices available to you, including grilles, floor mats, chrome trim, and more. The highest quality at the best prices - that's how we do things. If you're in need of Kia Sorento accessories, this is the place to be!

Whatever you expect from your Kia Sorento, a bold look, mind-boggling performance, greater ride comfort, or safer driving, CARiD goes the extra mile to meet all your needs. Our extensive range of premium accessories and parts covers all the bases, whether you want your vehicle to be more powerful, smarter, fun to drive, or just need to restore it to original condition. We know how to throw a classy appeal into your Kia Sorento and keep it providing the best performance, so trust us and get the greatest bang for the buck!

Featured Products

Guides & Articles

  • Rear spoilers are one of the flashiest yet cost-effective exterior additions you can make to your ride. The right spoiler will transform a plain-Jane family car into a sports sedan, and upgrade a sporty car into a one-of-a-kind race machine.
  • A simple way to answer this question would be with a "yes". However, the science of properly managing airflow to create beneficial automotive aerodynamics is, quite literally, more complicated than meets the eye. The word "aerodynamics" brings to mind visions of a vehicle in a wind tunnel with a smoke wand illustrating how smoothly air flows over it. But true automobile aerodynamics involves a detailed study of how the motion of air interacts with all areas of an automobile. One term that gets the most attention is "coefficient of drag" (Cd), which is an overall measurement of a shape's resistance to airflow.
  • When you've finally decided on the right rear spoiler or wing for your vehicle, it can't arrive quickly enough. Then, you want it to be ready for installation as soon as possible so you can begin enjoying the benefits of it. Because we understand this, we offer the option of ordering spoilers pre-painted by our manufacturers before shipping. Based on customer feedback and experiences relayed to us, we strongly recommend you consider choosing this option, for these very good reasons:
  • The function of a rear spoiler is to control the flow of air streaming over a vehicle and properly manage it when it reaches the rear where turbulence is most likely to form. A correctly designed spoiler will counteract the lifting forces that most cars experience when speeds get high, and it will enhance rear grip by keeping a vehicle's rear end planted firmly against the road - without causing excess drag.
  • If you're an automotive enthusiast who has visited our performance sections, it's likely that you know that reducing overall vehicle weight is an effective way to enhance your vehicle's performance, handling, and fuel economy. Naturally, there are different schools of thought on the subject of vehicle weight reduction.
  • If you're reading this, you've probably decided the factory stock appearance of your car, while attractive, is rather staid and unexciting. You know that modifying your vehicle with a body kit is what feels right when it comes to adding a personal touch and making it your own. Maybe you're considering starting out slowly by adding a rear spoiler or front air dam, or going further with side skirts and even a replacement custom hood.
  • At CARiD, we understand how deeply the appeal of side skirts, rear diffusers, aero wings, air dams, custom replacement bumper covers, and other components included in body kits runs in the blood of automotive enthusiasts. We know, because we've added them on our own vehicles to enhance performance and to create uniquely impressive visual signatures.
  • Full body kits are inspired by the look and functionality of body panel refinements made to racecars after relentless amounts of wind tunnel testing and aerodynamic adjustments on the track. Careful sculpting of body panels with addition of air dams, skirts, rear spoilers, ridges and diffusers serves to control airflow around the car - yielding a lower coefficient of drag along with greater amounts of downforce that keep a car pressed against the ground at higher speeds.
  • Maybe you've struggled to reach the roof rack of an SUV during loading and unloading of baggage. Or, if you live in a winter climate area, maybe you've also found it extremely difficult to clear snow off your van's roof because the brush in your hand wasn't long enough to reach the center. Either way, opening a vehicle door and standing precariously on the floor with both feet just inside can easily lead to loss of balance and injury. Plus, there's always a plenty of snow that spills into the passenger area - no matter how hard you try to avoid it.
  • If you carry heavy objects, sharp-edged debris, branches, lumber, rubble, and equipment in your pickup truck regularly, you know it doesn't take much for this kind of cargo to leave scratches and gouges on the painted metal surface of your bed floor and walls. Odds are you've experienced this. No matter how gingerly you place items in your bed and tie them down, the unexpected panic stop that always comes up sooner or later still manages to create chaos as things shift around. Maybe you've even felt and heard a dreaded thump behind your seat after heavier items broke free and slid forward hard - leaving a noticeable dent in your bed wall. While these are problems inherent with any metal bed floor, there is a better way to carry cargo while keeping your pickup bed looking good.
  • Whether you use your pickup for work or for recreation, carrying a lot of equipment, tools, and gear means you're potentially prepared for a range of situations. But if you can't find exactly what you need and extract it from your truck's cargo area in a timely manner, you're really not as prepared as you think. Consider the last time you couldn't find something in your truck. Maybe a search through the entire vehicle was necessary in order to be sure the item wasn't in the truck before beginning a search somewhere else. How much time did that take? And how was your stress level afterward? Or maybe, perish the thought, you had to buy a new tool to replace one you couldn't find but knew wasn't actually lost for good.
  • Seasoned professional automotive technicians often say if you're using too much physical effort during a repair, you're simply not using the right tool. This is true, and a perfect example is repairing and replacing suspension components. If you've ever done this type of work or attempted to do it, you know it can be trickier than merely loosening and tightening bolts.
  • Grille guards, bull bars, push bars, and bumper guards all offer good looks and serious protection for the front of your vehicle against hard knocks found on roads and trails everywhere. One of the best things about these protective devices is even though they'll look good and keep their high-strength integrity for a long time, it only takes a very short time to install any of them. In fact, they can bolted on relatively easily, in most cases using simple hand tools.
  • It's a dismaying feeling seeing side view mirror components damaged. Whether you know how the damage happened or not, you're faced with what might be an extensive, costly repair and the dreaded hassle of figuring out what replacement parts are necessary - or where to go for the repair. Maybe it’s only the glass that’s cracked, or perhaps the whole assembly is hanging loosely by a wire.
  • If you're looking to beef up your 4x4 to take it off-roading, chances are you've been reading about all the ways it's possible to improve a truck and get it ready for the trails. There are so many different approaches to the subject and so many differing opinions, your head may start spinning. We know starting from scratch can be confusing, especially if you're undertaking something you've never been involved with before.
  • Grille guards are sought-after accessories because they offer the rare combination of significantly boosting a truck's looks and adding valuable protection against front-end damage on job sites, off-road trails, and other tricky situations. Looking through the grille guard & bull bar section of our website, you'll see a variety of ways to protect the front of your vehicle. Because the expression "grille guard" has grown to encompass bull bars, brush guards, push bars, and bumper guards, we'll define these different styles and review the benefits each variation offers. Some of them span just the center area of your vehicle's front fascia, while others reach all the way from corner to corner.
  • There's a saying that advises out of all the paths you take in life, it's important to make sure a few of them are dirt. But while dirt can be found most anywhere you leave the pavement, far more challenging conditions and obstacles lie in wait - some seen, and some unseen. Because no two people's definitions of off-roading will be quite the same, we offer off-road front bumpers for 4x4s that are designed to avoid scrapes and damage while handling a variety of tasks OEM bumpers can't. Heavy gauge steel provides extra strength, and angled corners and edges provide extra clearance. Steep approach angles that would damage factory bumpers become no problem - wherever boulders arise from ashes.
  • Ask any serious off-roading expert what type of rear bumper is best for your 4x4, and they'll tell you the best bumper for extreme use (such as rock crawling) is one that's barely even there. What does that mean exactly? Translated, it means bumpers with edges that angle upward at corners and undersides that slope drastically upward will keep you out of trouble. Smaller size and less mass in these areas means better clearance at extreme angles - ensuring a rear bumper doesn't scrape, drag, or become damaged. Where OEM bumpers are massive and block-shaped, replacement off-road bumpers are not.
  • Since the demise of built-in running boards after World War II, auto manufacturers have been using rocker panel moldings to dress up a vehicle area that would otherwise be plain-looking and nondescript. Technically, a rocker panel is the section of a vehicle’s body below the doors and between the front and rear wheel wells. For decades, stainless steel molding strips were installed over rocker panels for styling purposes and to protect the body from stones and debris. Typically, a value-priced base model would have no rocker panel moldings at all, a higher-trim level would feature a slim molding strip just below the doors, and the most expensive version of a car would be equipped with wide rocker molding sets that extended further up onto the doors.
  • One of the more eye-catching tricks automobile manufacturers have used to differentiate higher-priced luxury versions of a car model from value-priced versions of it has been to vary the amount of chrome trim on the vehicle. Base model cars and trucks (also known as "strippers" or "entry level") have little if any chrome while luxury and top-of-the-line ones have the most chrome. In years past, plain Jane cars were simply painted in all areas instead of being chromed. In more recent decades, the low-cost replacement of choice has become black plastic. This makes base models easier than ever to spot because the eye catches hard on black plastic. Completely missing is the pleasing chrome finish on grilles, door trim, mirror assemblies, light bezels, and other areas. Base models end up looking more like fleet vehicles or work trucks than anything prestigious, especially to people who aren't automotive enthusiasts.
  • Let’s say that you’re in the market for wheel spacers. Whether it’s because you’ve added jumbo brakes, sprung for a set of custom wheels, or just want to widen your car’s stance (the VIP look), you’ve concluded that spacers are going to do the trick for you, and will solve your fitment dilemma.
  • A tonneau cover is one of the most useful accessories you can buy for your pickup truck. Tonneau covers provide protection from the weather, security, increased gas mileage, and improved styling. But with so many types and styles to choose from, which tonneau cover is right for your truck? Read on to find out.
  • If you're shopping for a new custom grille to add visual impact to the front of your car or truck, you'll see the installation methods described using such terms as "replacement", "insert", and "overlay". In this article, we’ll discuss what makes each of these methods different from each other. Whenever possible, we recommend reading a manufacturer’s installation instructions that may be available online before making a purchase. That way, you can make an informed decision regarding your ability to install the grille yourself or not. You’ll also get a sense of what tools and equipment you might need. We invite you to browse through our selection of hand tools, power tools, and other automotive tools should you find yourself in need of any of these labor-saving devices.
  • Automotive enthusiasts enjoy engaging in discussions about which car model is sleekest, which truck is brawniest, which wheels are best-looking, which car wax makes paint its shiniest, and so on. The conversations are eternal, encouraging exploration of minute details on any given subject. But ultimately, there really isn't any answer to the question of what is the best of something because it comes down to a matter of taste. Custom grilles are certainly no exception.
  • While custom grilles are among our most popular accessories, due to their relative affordability combined with the ease with which they can be installed, not everyone wants to change their vehicle’s look. Yes, that billet or mesh grille transforms the front of your car; but it’s still your car and therefore still your choice. You may, for various reasons, want to stay with the frontal factory appearance.
  • The grille on your car or truck is its most distinctive signature, and it's one of the first things people notice about your ride. A well-designed grille can make it easy for those with even a passing interest in cars to recognize the type of vehicle you drive. In our Car & Truck Custom Grilles section, we allow you to go a step further with grilles that complement, enhance, or revamp your front end a little or a lot depending on your preference. You can take this to its ultimate conclusion by creating a look for the front of your car that everyone will recognize as YOU. In this article, we'll guide you through the types and styles of grilles we offer, and we'll cover terminology you may not be familiar with such as mesh, billet, and CNC styles.
  • Seat cover design and construction have progressed a great deal in recent decades. Not so long ago, the phrase "automotive seat cover" brought to mind loose-fitting lamb's wool or sheepskin covers which slid over an entire seat like a leaf bag. This type of cover was virtually the only choice available, so the fact that they fit poorly, slid off the seats, and constantly pulled up at the corners was taken in stride because they were, after all, one-size-fits-all products. Since they were universally shaped, a single product was tasked with fitting seats in large pickup trucks as well as those in snug sports cars.
  • If you own a dog, chances are you already know the joy that comes bringing them along in your car or truck. Part-best friend and part-family, dogs appreciate every nuance that riding in a car brings – things we used to appreciate as children but have forgotten as adults. Watching the scenery, hanging a head out the window to enjoy a cool breeze, and observing other animals in passing are just some of what bring dogs a great amount of pleasure during the ride.
  • At CARiD, we understand it can be challenging to choose between styles of floor mats and floor liners, decide if you need a cargo liner, and figure out whether carpeting, vinyl, or rubber construction is best for you. In the Car & Truck Floor Mats section of our website, we offer many choices - each one with its own product description reflecting different descriptive terms and expressions used by the mat manufacturers. Because such terms can vary from manufacturer to manufacturer, we've created this glossary to help you make a more informed choice.
  • Floor mats and floor liners can do a lot to boost the luxury, utility, and sportiness of your vehicle's interior image. They are one of the first things passengers' eyes will fall on when entering your vehicle. That makes the floor mats you select worth careful consideration when it comes to factors such as feel under your feet, tolerance to spills, overall floor coverage, and colors. We've created this article to discuss how the different mat materials compare in those categories.

Kia Sorento Accessories & Parts Reviews

Average rating:  4.5  4.5 - 103 reviews
4.3 of 5
Bugflector II
Installation is not as easy as need to be. I had to replace facing screws for metal ones, because it came with plastic screws that can't hold and to short. It took me about an hour and a half to be able to find correct screws & plastic plugs to install bugflector. Otherwise product is good. Thanks.
APosted by Alexander (Lake Forest, CA) /
2010 Kia Sorento
Was this review helpful for you? Yes
View More
Kia Sorento Models
SECURE SHOPPING

All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.