Lo Pro QT: Frequently Asked Questions

Q: How do I care for my vinyl tonneau cover?

A: The vinyl fabric on your tonneau cover can be cleaned with mild soap and water, and may be hand washed or safely cleaned in the car wash of your choice. Thoroughly rinse cover to remove any soap residue. Vinyl cover can be treated with any vinyl protectants made for tonneau covers. Never clean cover with petroleum or citrus-based products, and avoid silicone-based protectants. We now offer Pro-TeX soft tonneau protectant spray to clean, preserve and protect your soft tonneau.

Q: How do I adjust the tension on my tonneau cover?

A: The TruXedo Lo Pro QT tonneau cover has automatic tension control. There are two spring loaded steel plungers at the front of the bed that maintain constant tension on the front header, allowing the cover to stay tight in any weather. Initially, you need to set the tension. This should be done during the warmest part of the day by closing the cover, releasing the Velcro brand fasteners from both sides near the cab, and checking compression of the spring plungers against the front header. Roll cover open to make adjustments. Repeat until satisfactory tension is achieved. Refer to the TruXedo Lo Pro QT Owners Manual for more specific information.

Q: I have a toolbox on my truck already? Can I still get a TruXedo Lo Pro QT to fit on my truck?

A: Yes, you can easily install a TruXedo Lo Pro QT, just check the installation instructions.

Q: Will the TruXedo Lo Pro QT work with my other truck accessories?

A: Yes! The unique inside mount design of the TruXedo Lo Pro QT rails enables you to accessorize with most bed rails, bed liners, and rail caps. Custom applications for toolboxes are also available.

Q: Can I lock the TruXedo Lo Pro QT?

A: The TruXedo Lo Pro QT secures automatically when latched at the rear, and provides added security when used with a locking tailgate. It cannot be opened until the tailgate is unlocked and opened. There are no additional locks or sliding mechanisms needed to lock the cover.

Q: Will the TruXedo Lo Pro QT work in the winter as well as in the summer?

A: The tonneau cover fabric will not shrink in cold temperatures, to –40 degrees F. Patented automatic tension control system keeps the cover tight whether it is 40 degrees below or 120 degrees above. Sliding Velcro brand hook on the side rail works with the automatic tension control plungers to keep the cover tight – even when it's closed!

Q: Will the TruXedo Lo Pro QT work with a 5th wheel?

A: Yes! Simply roll the cover all the way open and secure with security straps at the front of the bed. This allows you full access to your 5th wheel.

Q: Can I still open my tailgate with the TruXedo Lo Pro QT on my truck?

A: Yes – the TruXedo Lo Pro QT does not restrict the tailgate. The rear header functions independently of the tailgate so there is nothing to remove when opening the tailgate.

Q: Does the TruXedo Lo Pro QT come in different colors?

A: The TruXedo Lo Pro QT is available in five popular colors including Black, Navy Blue, Buckskin, Charcoal Grey and Light Grey.

Q: I have a bed extender. Will the TruXedo Lo Pro QT work with it?

A: The TruXedo Lo Pro QT side rails extend 3" into the bed on each side. In order to use the bed extender, it must not come within 3" of the side of the bed when rotated, or it must be able to detach from the truck, be manually rotated and re-attached. An adaptor kit is available to be purchased separately for 05-07 Nissan Frontiers and Nissan Titans with utili-trac systems. Please contact a dealer for more information.

Q: I have a truck with a utility track system in the bed. Can I still use a TruXedo Lo Pro QT?

A: Yes. Many of the late-model trucks have a utility track system to make the truck bed more accessory and user-friendly. We research all of the new trucks to make sure we have the best hardware to attach the TruXedo Lo Pro QT to the truck. The hardware kits for these beds include modified clamps that will work with the various utility track systems.

Q: I live in a region that is very hot. Will the TruXedo Lo Pro QT fabric fade in the sun?

A: The fabric used in the TruXedo Lo Pro QT is very high quality and has been tested in extreme conditions. It is UV-protected and will not fade in the sun.

Q: I live in a region that gets a lot of heavy snow. Can the TruXedo Lo Pro QT hold the snow without bending or stretching?

A: The fabric used in the TruXedo Lo Pro QT is very high quality and has been tested in extreme conditions. It can hold up to 350 pounds without stretching the fabric.

Q: I would like to install the TruXedo Lo Pro QT myself. How long will it take to install it myself?

A: Typically, the TruXedo Lo Pro QT can be installed easily in minutes! See the Installation for more detailed installation instructions.

Q: Will I be able to open my Honda Ridgeline trunk if I have a TruXedo Lo Pro QT tonneau cover?

A: Yes. Your trunk is fully functional and will open approximately 85% of the way.

Q: Will the Lo Pro QT work with a drop in bed liner that goes over the bed rails?

A: Yes, a Lo Pro QT will work with a drop in bed liner that goes over the bed rails. However, installation for this particular application will vary slightly from the normal installation process. Small holes (approximately 2'x4") would need to be cut in the bed liner where the clamps will be installed. This allows access to the inner lip of the truck bed. If the liner goes over the front bulkhead and creates a radius at the front, you may need to cut slits in the bed liner at the front of the bed to allow the rails to push further forward in the bed.

Q: Why is there a hole punched on the rear of the passenger side rail of the TruXedo Lo Pro QT, but no latch present?

A: The reason the rails are all punched the same way is to keep them uniform, for manufacturing efficiency and to reduce tooling costs. By doing this, we are able to keep manufacturing time down to get you your orders faster and also to keep the price of our products lower.

Q: I own a Nissan Frontier, will the Lo Pro QT work with my utility track system?

A: Yes, the Lo Pro QT will work with your track system. If your truck has the track system, install two clamps on each side rail, locating clamps at each end of Utili-track channels.

Q: I own a Nissan Frontier and the application listing states that it does not include QT header guides.  What exactly does that mean?

A: The design of the Nissan Frontier is that the cab partially sits over top of the bulkhead. This minimizes space for the front header to sit on the bulkhead. In order for this kit to function properly, a cab weather seal is applied to the back of the bulkhead creating a larger contact surface for sealing. By adding this cab seal, it shortens the length of the truck bed and Lo Pro QT side rails. Since the rails are shortened on the Frontier kit, there is a possibility that the standard header guides would slide off the front of the side rails. We chose to bolt the front header to the side rails through an oblong hole, which still allows the tension control to be functional and eliminates the possibility of the front header from sliding off of the side rails. See technical drawing here.

Back to top

Edge: Frequently Asked Questions

Q: How do I care for my vinyl tonneau cover?

A: The vinyl fabric on your tonneau cover can be cleaned with mild soap and water, and may be hand washed or safely cleaned in the car wash of your choice. Thoroughly rinse cover to remove any soap residue. Vinyl cover can be treated with any vinyl protectants made for tonneau covers. Never clean cover with petroleum or citrus-based products, and avoid silicone-based protectants. We now offer Pro-Tex soft tonneau protectant spray to clean, preserve and protect your soft tonneau.

Q: How do I adjust the tension on my tonneau cover?

A: Set tension during warmest part of day. With cover closed, release hook and loop fasteners from both side rails near cab. Roll cover opened and rotate tension controls to adjust. Close cover and recheck. Repeat until satisfactory tension is achieved.

Q: I have a toolbox on my truck already? Can I still get an Edge to fit on my truck?

A: The Edge tonneau cover cannot be custom made to fit with an existing toolbox.

Q: Will the Edge work with my other truck accessories?

A: Yes! The unique inside mount design of the Edge rails enables you to accessorize with most bed rails, bed liners, and rail caps.

Q: Can I lock the Edge?

A: The Edge secures automatically when latched at the rear, and provides added security when used with a locking tailgate. It cannot be opened until the tailgate is unlocked and opened. There are no additional locks or sliding mechanisms needed to lock the cover.

Q: Will the Edge work in the winter as well as in the summer?

A: The Edge fabric expands slightly in cold weather, so it is very easy to operate – even at 20 degrees below zero! There are no cumbersome snaps or zip-strips to hassle with – no more tugging on the fabric to get it snapped. Just roll it back and latch into place. Then slide your hand along the sides to engage the Velcro brand fasteners on the sides.

Q: Will the Edge work with a 5th wheel?

A: Yes! Simply roll the cover all the way open and secure with security straps at the front of the bed. This allows you full access to your 5th wheel.

Q: Can I still open my tailgate with the Edge on my truck?

A: Yes – the Edge does not restrict the tailgate. The rear header functions independently of the tailgate so there is nothing to remove when opening the tailgate.

Q: Does the Edge come in different colors?

A: The Edge fabric is available in black only.

Q: I live in a region that is very hot. Will the Edge fabric fade in the sun?

A: The fabric used in the Edge is very high quality and has been tested in extreme conditions. It is UV-protected and will not fade in the sun.

Q: I would like to install the Edge myself. How long will it take to install it myself?

A: Typically, the Edge can be installed easily in minutes! For detailed installation instructions, see the Edge owner's manual.

Q: Why is there a hole punched on the rear of the passenger side rail of the TruXedo Edge, but no latch present?

A: The reason the rails are all punched the same way is to keep them uniform, for manufacturing efficiency and to reduce tooling costs. By doing this, we are able to keep manufacturing time down to get you your orders faster and also to keep the price of our products lower.

Back to top

TruXport: Frequently Asked Questions

Q: Where can I find the date code stamp on my TruXport cover?

A: The date stamp on the TruXport covers is found on the PASSENGER SIDE (underside of cover) towards the Tailgate. (Rear)  This can be viewed by rolling the rear header 2-3 times and the part number/ date code will be visible. View image here.

Q: How do I care for my TruXport tonneau cover fabric?

A: The vinyl fabric on your tonneau cover can be cleaned with mild soap and water, and may be hand washed or safely cleaned in the car wash of your choice. Thoroughly rinse cover to remove any soap residue. Vinyl cover can be treated with any vinyl protectants made for tonneau covers. Never clean cover with petroleum or citrus-based products, and avoid silicone-based protectants. We now offer Pro-Tex soft tonneau protectant spray to clean, preserve and protect your soft tonneau.

Q: What is the difference between the TruXport and a TruXedo Lo Profile tonneau cover?

A: The TruXport tonneau cover is intended to be an economic alternative to traditional snap-style covers. It has fewer features and benefits than the premium tonneau cover, TruXedo Lo Profile. This TruXport®/TruXedo Lo Pro QT Comparison shows the differences between the two tonneau covers.

Q: Is the TruXport weather proof?

A: Although no tonneau cover is completely waterproof, the TruXport tonneau cover will help to keep rain, snow, and dust out of the bed of your truck. The TruXport has seals on all four sides.

Q: Can I use the TruXport with my toolbox?

A: The TruXport tonneau cover does cover the entire truck bed. It cannot be made to fit with an existing toolbox.

Q: Does the TruXport come in any other colors?

A: The TruXport fabric is available in black only.

Q: How can I keep the TruXport tonneau cover tight?

A: TruXport tonneau covers come with an easily adjustable tension control system, located at the rear of the cover, near the tailgate. By turning the plastic dials on each side of the cover, you can adjust the tension on the cover. For more detailed instructions on adjusting the tension control on the TruXport cover, see the owner's manual.

Q: How does the TruXport mount to the truck?

A: The TruXport is a top-mount design, meaning it mounts to the top of the truck bed rails. The rails of the TruXport are clamped onto the truck bed rails on each side using three clamps. The front and rear headers attach to the TruXport rails. For more detailed instructions on installing the TruXport tonneau cover, please refer to the owner's manual.

Q: I have other truck accessories. Can I use the TruXport with them?

A: Since the TruXport is mounted to the top of the truck bed rails, it cannot be used with bed rails. It can, however, be used with bed liners and bed caps.

Q: Can I lock the TruXport tonneau cover?

A: The TruXport tonneau cover cannot be opened without opening the tailgate. Cover can provide added security when used with a locking tailgate.

Q: Will the TruXport fabric fade in the sun?

A: The fabric used in the TruXport is very high quality and has been tested in extreme conditions. It is UV-protected and will not fade in the sun.

Q: I would like to install my TruXport myself. How long does it take to install a TruXport tonneau cover?

A: The TruXport does require more assembly than the Original TruXedo and the TruXedo Lo Profile. On average, it takes about 20-30 minutes to install. For detailed installation instructions, see the TruXport owner's manual.

Q: With other inexpensive tonneau covers, it is difficult to operate them in cold weather. Will TruXport work in the cold?

A: TruXport fabric expands slightly in cold weather, so it is very easy to operate – even at 20 degrees below zero! There are no cumbersome snaps or zip-strips to hassle with – no more tugging on the fabric to get it snapped. Just roll it back and latch into place. Then slide your hand along the sides to engage the Velcro brand fasteners on the sides.

Q: Does TruXport cover stake hole pockets?

A: Depending on the truck model, TruXport may or may not cover all stake hole pockets.

Back to top

Deuce: Frequently Asked Questions

Q: How do I care for my vinyl tonneau cover?

A: The vinyl fabric on your tonneau cover can be cleaned with mild soap and water, and may be hand washed or safely cleaned in the car wash of your choice. Thoroughly rinse cover to remove any soap residue. Vinyl cover can be treated with any vinyl protectants made for tonneau covers. Never clean cover with petroleum or citrus-based products, and avoid silicone-based protectants. We now offer Pro-Tex soft tonneau protectant spray to clean, preserve and protect your soft tonneau.

Q: How do I adjust the tension on my tonneau cover?

A: The TruXedo Deuce tonneau cover has automatic tension control. The exclusive hinge design has a built-in automatic tension control device that separates and lifts the fabric to avoid pinch and wear. Refer to the TruXedo Deuce Owner's Manual for more specific information.

Q: I have a toolbox on my truck already? Can I still get a TruXedo Deuce to fit on my truck?

A: Unfortunately, no.

Q: Will the TruXedo Deuce work with my other truck accessories?

A: The TruXedo Deuce will work with most truck accessories such as bed liners, rail caps and side rails. It may not work with all bed extenders. The TruXedo Deuce side rails extend 3" into the bed on each side. In order to use the bed extender, it must not come within 3" of the side of the bed when rotated, or it must be able to detach from the truck, be manually rotated and re-attached.

Q: Can I lock the TruXedo Deuce?

A: The TruXedo Deuce secures automatically when latched at the rear, and provides added security when used with a locking tailgate. It cannot be opened until the tailgate is unlocked and opened. The hinged portion also has a locking mechanism. When the locking mechanism is used and the latch at the front of the bed is secured, the latch can only be unlocked by rolling the cover all the way open and releasing the locking mechanism.

Q: Will the TruXedo Deuce work in the winter as well as in the summer?

A: The tonneau cover fabric will not shrink in cold temperatures, to –40 degrees F. Patent pending automatic tension control system keeps the cover tight whether it is 40 degrees below or 120 degrees above. Sliding Velcro brand hook on the side rail works with automatic tension control to keep the cover tight – even when it's closed!

Q: Will the TruXedo Deuce work with a 5th wheel?

A: Yes! Simply roll the cover all the way open and secure with security straps at the front of the bed. This allows you full access to your 5th wheel.

Q: Can I still open my tailgate with the TruXedo Deuce on my truck?

A: Yes – the TruXedo Deuce does not restrict the tailgate. The rear header functions independently of the tailgate so there is nothing to remove when opening the tailgate.

Q: Does the TruXedo Deuce come in different colors?

A: The TruXedo Deuce is available in five popular colors including Black, Navy Blue, Buckskin, Charcoal Grey and Light Grey.

Q: I have a bed extender. Will the TruXedo Deuce work with it?

A: The TruXedo Deuce side rails extend 3" into the bed on each side. In order to use the bed extender, it must not come within 3" of the side of the bed when rotated, or it must be able to detach from the truck, be manually rotated and re-attached.

Q: I have a truck with a utility track system in the bed. Can I still use a TruXedo Deuce?

A: Not at this time.

Q: I live in a region that is very hot. Will the TruXedo Deuce fabric fade in the sun?

A: The fabric used in the TruXedo Deuce is very high quality and has been tested in extreme conditions. It is UV-protected and will not fade in the sun.

Q: I live in a region that gets a lot of heavy snow. Can the TruXedo Deuce hold the snow without bending or stretching?

A: The fabric used in the TruXedo Deuce is very high quality and has been tested in extreme conditions. It can hold up to 350 pounds without stretching the fabric.

Q: I would like to install the TruXedo Deuce. How long will it take to install it myself?

A: Typically, the TruXedo Deuce can be installed in 40 minutes. It requires a 9/16" wrench to tighten the 6 clamps that attach the side rails to the inside of the truck bed. You will also need a 1/2" box end wrench and ½" socket. See the Installation for more detailed installation instructions.

Q: Will the TruXedo Deuce work with my in-box toolbox or other in-box cargo management systems?

A: With the wide variety of toolboxes and cargo management systems available, this will vary by application. Here are some guidelines to follow to help you – The top of the toolbox or cargo management system must be ½" below the top of the pickup bed. The toolbox length must also be a minimum of 7" shorter than the width of the inside front of the pickup bed. Subtracting 7" allows the toolbox to be opened when the cover is rolled completely open. When the cover is flipped open, the length of the opening from the front of the bed to the hinge is 26". The toolbox should be spaced 3-4" away from the front of the pickup bed so it does not interfere with the latch.

Q: Why is there a hole punched on the rear of the passenger side rail of the TruXedo Deuce, but no latch present?

A: The reason the rails are all punched the same way is to keep them uniform, for manufacturing efficiency and to reduce tooling costs. By doing this, we are able to keep manufacturing time down to get you your orders faster and also to keep the price of our products lower.

Back to top

TonneauTraX: Frequently Asked Questions

Q: Is there a total loading limit that shall not be exceeded when using the TonneauTraX?

A: Yes! Each individual anchor is rated at a working load limit of 250 pounds. The total loading for all anchor locations combined shall not exceed 1000 pounds.

Q: Are there any objects or items that I should not secure or tie down to my TonneauTraX?

A: We suggest that you do not attach heavy or unstable objects to TonneauTraX rails. You should only use the trucks factory bed anchors for securing unstable items or heavy items that exceed the TonneauTraX recommended load rating of the cargo anchors. Failure to do so, could cause damage to the pickup bed.

Q: How many anchor point locations does the TonneauTraX have?

A: The number of anchor point locations, depends on the length of the side rail.

  • • 4 ½' bed will have 7 anchor point locations on each side rail
  • • 5' bed will have 8 anchor point locations on each side rail
  • • 5 ½' bed will have 8 anchor point locations on each side rail
  • • 5' 8" bed will have 8 anchor point locations on each side rail
  • • 6' bed will have 8 anchor point locations on each side rail
  • • 6 ½' bed will have 10 anchor point locations on each side rail
  • • 7' bed will have 10 anchor point locations on each side rail
  • • 8' bed will have 12 anchor point locations on each side rail

Q: How do I care for my vinyl tonneau cover?

A: The vinyl fabric on your tonneau cover can be cleaned with mild soap and water, and may be hand washed or safely cleaned in the car wash of your choice. Thoroughly rinse cover to remove any soap residue. Vinyl cover can be treated with any vinyl protectants made for tonneau covers. Never clean cover with petroleum or citrus-based products, and avoid silicone-based protectants. We now offer Pro-Tex soft tonneau protectant spray to clean, preserve and protect your soft tonneau.

Q: How do I adjust the tension on my tonneau cover?

A: The TonneauTraX tonneau cover has automatic tension control. There are two spring loaded steel plungers at the front of the bed that maintain constant tension on the front header, allowing the cover to stay tight in any weather. Initially, you need to set the tension. This should be done during the warmest part of the day by closing the cover, releasing the Velcro brand fasteners from both sides near the cab, and checking compression of the spring plungers against the front header. Roll cover open to make adjustments. Repeat until satisfactory tension is achieved. Refer to the TonneauTraX Owner's Manual for more specific information.

Q: Will the TonneauTraX work with my other truck accessories?

A: Yes! The unique inside mount design of the TonneauTraX rails enables you to accessorize with most bed rails, bed liners, and rail caps.

Q: Can I lock the TonneauTraX?

A: The TonneauTraX secures automatically when latched at the rear, and provides added security when used with a locking tailgate. It cannot be opened until the tailgate is unlocked and opened. There are no additional locks or sliding mechanisms needed to lock the cover.

Q: Will the TonneauTraX work in the winter as well as in the summer?

A: The tonneau cover fabric will not shrink in cold temperatures, to –40 degrees F. Patented automatic tension control system keeps the cover tight whether it is 40 degrees below or 120 degrees above. Sliding Velcro brand hook on the side rail works with the automatic tension control plungers to keep the cover tight – even when it's closed!

Q: Will the TonneauTraX work with a 5th wheel?

A: Yes! Simply roll the cover all the way open and secure with security straps at the front of the bed. This allows you full access to your 5th wheel.

Q: Can I still open my tailgate with TonneauTraX on my truck?

A: Yes – the TonneauTraX does not restrict the tailgate. The rear header functions independently of the tailgate so there is nothing to remove when opening the tailgate.

Q: Does the TonneauTraX come in different colors?

A: The TonneauTraX is available in five popular colors including Black, Navy Blue, Buckskin, Charcoal Grey and Light Grey.

Q: I have a bed extender. Will the TonneauTraX work with it?

A: The TonneauTraX side rails extend 3" into the bed on each side. In order to use the bed extender, it must not come within 3" of the side of the bed when rotated, or it must be able to detach from the truck, be manually rotated and re-attached. An adaptor kit is available to be purchased separately for 05-08 Nissan Frontiers and Nissan Titans with utili-trac systems. Please contact a dealer for more information.

Q: I live in a region that is very hot. Will the TonneauTraX fabric fade in the sun?

A: The fabric used in the TonneauTraX is very high quality and has been tested in extreme conditions. It is UV-protected and will not fade in the sun.

Q: I live in a region that gets a lot of heavy snow. Can the TonneauTraX hold the snow without bending or stretching?

A: The fabric used in the TonneauTraX is very high quality and has been tested in extreme conditions. It can hold up to 350 pounds without stretching the fabric.

Q: I would like to install the TonneauTraX myself. How long will it take to install it myself?

A: Typically, the TonneauTraX can be installed easily in about 20 minutes! See the Installation for more detailed installation instructions.

Q: I already have a TruXedo Lo Pro QT. Can I convert my TruXedo Lo Pro QT to a TonneauTraX?

A: Yes. You may purchase a conversion kit, which includes the two TonneauTraX side rails, four cargo anchors and ten TonneauTraX clamps. Our customer service department will be able to assist you in determining if the Lo Pro QT clamps will work with your current cover.

Q: Why is there a hole punched on the rear of the passenger side rail of the TruXedo TonneauTraX, but no latch present?

A: The reason the rails are all punched the same way is to keep them uniform, for manufacturing efficiency and to reduce tooling costs. By doing this, we are able to keep manufacturing time down to get you your orders faster and also to keep the price of our products lower.

Back to top

Custom Products: Frequently Asked Questions

Q: How do I care for my vinyl tonneau cover?

A: The vinyl fabric on your tonneau cover can be cleaned with mild soap and water, and may be hand washed or safely cleaned in the car wash of your choice. Thoroughly rinse cover to remove any soap residue. Vinyl cover can be treated with any vinyl protectants made for tonneau covers. Never clean cover with petroleum or citrus-based products, and avoid silicone-based protectants. We now offer Pro-Tex soft tonneau protectant spray to clean, preserve and protect your soft tonneau.

Q: How do I adjust the tension on my tonneau cover?

A: The TruXedo Lo Pro QT tonneau cover has automatic tension control. There are two spring loaded steel plungers at the front of the bed that maintain constant tension on the front header, allowing the cover to stay tight in any weather. Initially, you need to set the tension. This should be done during the warmest part of the day by closing the cover, releasing the Velcro brand fasteners from both sides near the cab, and checking compression of the spring plungers against the front header. Roll cover open to make adjustments. Repeat until satisfactory tension is achieved. Refer to the TruXedo Lo Pro QT Owners Manual for more specific information.

Q: I have a toolbox on my truck already? Can I still get a TruXedo Lo Pro QT to fit on my truck?

A: Yes, you can easily install a TruXedo Lo Pro QT, just check the installation instructions

Q: Will the TruXedo Lo Pro QT work with my other truck accessories?

A: Yes! The unique inside mount design of the TruXedo Lo Pro QT rails enables you to accessorize with most bed rails, bed liners, and rail caps. Custom applications for toolboxes are also available.

Q: Can I lock the TruXedo Lo Pro QT?

A: The TruXedo Lo Pro QT secures automatically when latched at the rear, and provides added security when used with a locking tailgate. It cannot be opened until the tailgate is unlocked and opened. There are no additional locks or sliding mechanisms needed to lock the cover.

Q: Will the TruXedo Lo Pro QT work in the winter as well as in the summer?

A: The tonneau cover fabric will not shrink in cold temperatures, to –40 degrees F. Patented automatic tension control system keeps the cover tight whether it is 40 degrees below or 120 degrees above. Sliding Velcro brand hook on the side rail works with the automatic tension control plungers to keep the cover tight – even when it's closed!

Q: Will the TruXedo Lo Pro QT work with a 5th wheel?

A: Yes! Simply roll the cover all the way open and secure with security straps at the front of the bed. This allows you full access to your 5th wheel.

Q: Can I still open my tailgate with the TruXedo Lo Pro QT on my truck?

A: Yes – the TruXedo Lo Pro QT does not restrict the tailgate. The rear header functions independently of the tailgate so there is nothing to remove when opening the tailgate.

Q: Does the TruXedo Lo Pro QT come in different colors?

A: The TruXedo Lo Pro QT is available in five popular colors including Black, Navy Blue, Buckskin, Charcoal Grey and Light Grey.

Q: I have a bed extender. Will the TruXedo Lo Pro QT work with it?

A: The TruXedo Lo Pro QT side rails extend 3" into the bed on each side. In order to use the bed extender, it must not come within 3" of the side of the bed when rotated, or it must be able to detach from the truck, be manually rotated and re-attached. An adaptor kit is available to be purchased separately for 05-07 Nissan Frontiers and Nissan Titans with utili-trac systems. Please contact a dealer for more information.

Q: I have a truck with a utility track system in the bed. Can I still use a TruXedo Lo Pro QT?

A: Many of the late-model trucks have a utility track system to make the truck bed more accessory and user-friendly. We research all of the new trucks to make sure we have the best hardware to attach the TruXedo Lo Pro QT to the truck. The hardware kits for these beds include modified clamps that will work with the various utility track systems.

Q: I live in a region that is very hot. Will the TruXedo Lo Pro QT fabric fade in the sun?

A: The fabric used in the TruXedo Lo Pro QT is very high quality and has been tested in extreme conditions. It is UV-protected and will not fade in the sun.

Q: I live in a region that gets a lot of heavy snow. Can the TruXedo Lo Pro QT hold the snow without bending or stretching?

A: The fabric used in the TruXedo Lo Pro QT is very high quality and has been tested in extreme conditions. It can hold up to 350 pounds without stretching the fabric.

Q: I would like to install the TruXedo Lo Pro QT myself. How long will it take to install it myself?

A: Typically, the TruXedo Lo Pro QT can be installed easily in minutes! See the Installation for more detailed installation instructions.

Q: I already have a TruXedo Lo Profile. Can I convert my TruXedo Lo Profile to a TruXedo Lo Pro QT?

A: Yes. You may purchase a conversion kit that includes the six quick attaching Lo Pro QT clamps and quick attaching spring-loaded header guide. If you prefer, you have the option of purchasing just the six quick attaching clamps. The clamps may not work on all trucks. Our customer service department will be able to assist you in determining if the Lo Pro QT clamps will work with your current cover.

Back to top

Pro-Tex: Frequently Asked Questions

Q: How do I use Pro-TeX protectant spray?

A: Shake before using. Apply liberally over dry surface. Let penetrate one to three minutes, then scrub using soft nylon brush to dissolve embedded grease, grime and dirt. Remove wet film with clean paper towel. Apply second coat to surface and let dry. Lightly buff with microfiber cloth to create lustrous, anti-static, water repellent finish.

Q: What materials or products can I use Pro-TeX protectant spray on?

A: Pro-TeX protectant spray can be used on all vinyl, rubber and leather materials such as tires, dashes, trim and convertible tops.

Q: Where can I purchase Pro-TeX protectant spray?

A: Pro-TeX protectant spray can be purchased on our site, simply follow this link.

Back to top

TruxSeal: Frequently Asked Questions

Q: Why do I need TruxSeal for my truck?

A: Using TruxSeal is a great way to keep dust and moisture out of the truck bed. This will help keep your cargo clean and dry.

Q: Where can I purchase TruxSeal?

A: TruxSeal can be purchased on our site, simply follow this link.

Q: How long does the installation of TruxSeal take?

A: TruxSeal can be installed in roughly 5 minutes.

Back to top

Stake Pocket Covers: Frequently Asked Questions

Q: The tonneau cover doesn't completely cover the stake pockets on my truck. How can I seal them so dust and dirt won't get into my truck bed?

A: Our stake pocket covers are a great solution to your problem. With the easy, snap-in installation, the stake pocket covers will keep elements out of your truck and still give you the smooth, sleek appearance you are looking for.

Q: What make and models of trucks will TruXedo Stake Pocket Covers work for?

  • 02-08 Dodge Ram - P/N 1704210 (4 Pack)
  • 09-11 Dodge Ram - P/N 1704211 (4 Pack)
  • 87-98 Ford F-150 - P/N 1704210 (4 Pack)
  • 82-11 Ford Ranger - P/N 1704211 (4 Pack)
  • 81-98 GM Full Size - P/N 1704211 (4 Pack)
  • 99-11 GM Full Size - P/N 1704212 (4 Pack)

Back to top

B-Light Tonneau Lighting System: Frequently Asked Questions

Is there a warranty for the B-Light tonneau lighting system?

A: The warranty for the B-Light is one year.

Q: How long does the installation of the B-Light tonneau lighting system take?

A: The B-Light system can be installed in roughly 30 minutes.

Q: Do I have to mount the power switch inside the truck cab or can it be placed inside the truck bed?

A: The B-Light can be installed in either location. For best results, follow the installation instructions.

Q: Where can I purchase the B-Light tonneau lighting system?

A: The B-Light can be purchased on our site, simply follow this link.

Back to top