Caltrend
Installation

Bucket Seat Installation

CalTrend's Custom Tailored Seat Covers are made with a state-of-the-art CAD/CAM system, ensuring a 100% perfect fit making the installation process easy.

Installation Video

PDF Installation Guide.
Step 1
Bucket Seat Step 1
If applicable, remove headrest. (Some headrests require a small pin in order to be removed.) Then slide the backrest cover over the seat frame until it fits snugly. Make sure the back pouch is facing towards the back.
Step 2
Bucket Seat Step 3
Feed the fabric with velcro in between the seat. (some seat covers will have it's Velcro attach to the original upholstery of the seat).
Step 3
Bucket Seat Step 3
Stick the Velcro together, the bottom fitting under the top.
Step 4
Bucket Seat Step 4
Insert the headrest cut outs underneath the headrest registers.
Step 5
Bucket Seat Step 5
Slide the bottom seating cover over the seat, starting from the front towards the back.
Step 6
Bucket Seat Step 6
Feed the belts in between the seat.
Step 7
Bucket Seat Step 7
Feed the laces under the seat, make sure to put the straps on top of any
wires your seat may have underneath; this will help with any interference with movement and readjusting of seats.
Step 8
Bucket Seat Step 8
Attach the laces to their appropriate buckles.
Step 9
Bucket Seat Step 9
Insert any excess fabric in the side panels
Step 10
Bucket Seat Step 10
Apply the headrest cover on the headrest. make sure the rough (male) Velcro is in the back and the soft (female) Velcro is the the front.
Step 11
Bucket Seat Step 11
Enjoy your new custom tailored seat covers

40-20-40 Split Bench

CalTrend's Custom Tailored Seat Covers are made with a state-of-the-art CAD/CAM system, ensuring a 100% perfect fit making the installation process easy

Installation Video

PDF Installation Guide.
Step 1
40/20/40 Seat Step 1
If applicable, remove headrest. (Some headrests require a small pin in order to be remove.)
Step 2
40/20/40 Seat Step 3
Slide the backrest cover over the seat frame until it fits snugly. Make sure the back pouch is facing towards the back and slide the cover under any integrated seat belts.
Step 3
40/20/40 Seat Step 3
Feed the fabric with velcro in between the seat. (some seat covers will
have it's Velcro attach to the original upholstery of the seat).
Step 4
40/20/40 Seat Step 4
Fasten the Velcro from the back of the cover to secure a tight snug fit.
Step 5
40/20/40 Seat Step 5
Stick the Velcro together, the bottom fitting under the top.
Step 6
40/20/40 Seat Step 6
Slide the bottom seating cover over the seat, starting from the front towards the back.
Step 7
40/20/40 Seat Step 7
Feed the belts in between the seat,.
Step 8
40/20/40 Seat Step 8
Feed the laces under the seat, make sure to put the straps on top of any
wires your seat may have underneath; this will help with any interference with movement and readjusting of seats.
Step 9
40/20/40 Seat Step 9
Attach the straps with their appropriate belts and pull tightly for a secure fit.. (Note: According to individual car's Make and Model, the buckle may come from the front or the back.)
Step 10
40/20/40 Seat Step 10
Slide the console cover down and attach the Velcro .
Step 11
40/20/40 Seat Step 11
Apply the bottom console cover over the seat bottom of the console, follow up by attach the velcro pieces together.
Step 12
40/20/40 Seat Step 12
Apply the headrest cover on the head rest and attach the Velcro together, some headrest covers will come with elastic binds instead of Velcro.
Step 13
40/20/40 Seat Step 13
Enjoy your new Custom Seat Covers!

60/40&40/60 Split Bench Installation

CalTrend's Custom Tailored Seat Covers are made with a state-of-the-art CAD/CAM system, ensuring a 100% perfect fit making the installation process easy

Installation Video

PDF Installation Guide.
Step 1
60/40 Seat Step 1
If applicable, remove headrest. (Some headrests require a small pin in order to be removed.)
Step 2
60/40 Seat Step 3
Start off by removing the bottom cushion, there are a couple ways to do so
1.Locate the clips on both sides of the cushion, pull up until they snap off completely.
2.Locate the clips on both sides of the cushion, pull on the release levers next to the clips and pull up.
Step 3
60/40 Seat Step 3
completely remove the bottom cushion from the car, place cushion on a flat dry surface(i.e. the hood of your car or table.)
Step 4
60/40 Seat Step 4
Remove any items that may get in your way, like integrated seat belts * Your Custom Tailored seat covers will come designed to go under the integrated seat belt if unable to be removed*.
Step 5
60/40 Seat Step 5
Slide the upper backrest cover over the seat frame until it fits snugly. Make sure the back pouch is facing towards the back. * If your seats have
integrated seat belts, you'll install the custom seat cover under the belt from the side, like a coat*.
Step 6
60/40 Seat Step 6
Feed the fabric with velcro in between the seat.
Step 7
60/40 Seat Step 7
Stick the Velcro together, the bottom fitting under the top. (some seat covers will have it's Velcro attach to the original upholstery of the seat)
Step 8
60/40 Seat Step 8
Fasten the Velcro from the side of the cover to secure a tight snug fit.
Step 9
60/40 Seat Step 9
Insert the headrest cut outs underneath the headrest registers.
Step 10
60/40 Seat Step 10
Apply the seat bottom cover over the cushion, make sure the laces and belts are out on the sides.
Step 11
60/40 Seat Step 11
Attach the laces to their appropriate buckles, along with the side to side lace and buckle
Step 12
60/40 Seat Step 12
Reattach the seat bottom cushion to the car the same way you took it out, reinsert the belts in their appropriate location and adjust the cushion all the way
back so it lines up with the clips and holders.
Step 13
60/40 Seat Step 13
Once the clips and holders lineup push down until they SNAP back in.
Step 14
60/40 Seat Step 14
Apply the headrest cover on the headrest. make sure the rough (male)
Velcro is in the back and the soft (female) Velcro is the the front.
Step 15
60/40 Seat Step 15
Enjoy your new custom tailored seat covers

50-50 Split Bench

CalTrend's Custom Tailored Seat Covers are made with a state-of-the-art CAD/CAM system, ensuring a 100% perfect fit making the installation process easy

Installation Video

PDF Installation Guide.
Step 1
50/50 Seat Step 1
If applicable, remove headrest. (Some headrests require a small pin in order to be remove.)
Step 2
50/50 Seat Step 3
Slide the backrest cover over the seat frame until it fits snugly. Make sure the back pouch is facing towards the back and slide the cover under any integrated seat belts.
Step 3
50/50 Seat Step 3
Match any cut outs on the seat cover with the seat.
Step 4
50/50 Seat Step 4
Feed the fabric with velcro in between the seat. (some seat covers will
have it's Velcro attach to the original upholstery of the seat).
Step 5
50/50 Seat Step 5
Depending on the seat you can fasten the Velcro from the back of the cover to the original upholstery
Step 6
50/50 Seat Step 6
Or stick the Velcro together, the bottom fitting under the top.
Step 7
50/50 Seat Step 7
Insert the headrest cut outs under the headrest registers.
Step 8
50/50 Seat Step 8
Slide the bottom seating cover over the seat, starting from the front towards the back.
Step 9
50/50 Seat Step 9
Feed the belts in between the seat.
Step 10
50/50 Seat Step 10
Insert the seat belt through the seat belt cut outs of the seatcover.
Step 11
50/50 Seat Step 11
In order to attach the laces with the belts you may need to lift the seat(Keep in mind that not all seat can be lifted, if that is the case you seat cover will come
equipped with other means of installation).
Step 12
50/50 Seat Step 12
Continue the installation by attaching the belts and laces together.
Step 13
50/50 Seat Step 13
Proceed to attach the headrest cover on the headrest.
Step 14
50/50 Seat Step 14
Attach the headrest cover by pulling the fabric together and attaching the Velcro.
Step 15
50/50 Seat Step 15
Reattach the headrest onto your seat.
Step 16
50/50 Seat Step 16
Enjoy your new Custom Seat Covers!

Opening Console Installation

CalTrend's Custom Tailored Seat Covers are made with a state-of-the-art CAD/CAM system, ensuring a 100% perfect fit making the installation process easy

Installation Video