Hellwig® 61903 - Pro Series™ Rear Helper Springs

0 reviews|Item # mpn2948700|Similar Products
$463.14
Manufactured - Ships in 3 to 4 weeks
Vehicle Specific
  • Please Select Vehicle Below
Authorized Dealer

Product Details

Pro Series™ Rear Helper Springs (61903) by Hellwig®. Quantity: 1 per Pack. This is a set of secondary helper leaf springs. Pro Series adds polyurethane cushioning blocks that eliminate any rubbing, friction, and noise between leaf ends. The 2-leaf design progressively adds support as rear OEM leaf springs become loaded and compressed. Crafted from heat-treated ASTM 5160 alloy spring steel for maximum strength and resilience, these feature a spring rate that becomes firmer as pressure increases. Maintains proper rear ride height, prevents original springs from sagging due to sustained load compression, and helps reduce bouncing during towing. Fitted U-bolts and related hardware are included for mounting. Drilling may be required.

Specifications

Capacity: 2500 lbs
Height: 9.5"
Length: 43.5"
Width: 2.56"
Finish: Hammer Tone Powder Coat

Features

  • Set of secondary leaf springs designed to work with OEM leaf springs and support extra loads
  • Pro Series creates the quietest ride by adding polyurethane cushioning blocks to eliminate rubbing noise between leaf ends
  • Silent Ride polyurethane bushings included
  • Recommended for heavy hauling, work truck use, or pulling a 5th-wheel RV trailer
  • Also stabilizes the helper spring in reverse or rebound mode
  • Unique design provides enhanced load and sway control in one spring
  • Progressive spring rate is designed never to need adjustment
  • Prevents leaf spring from sagging due to sustained load compression
  • Maintains proper rear ride height
  • Design can handle the load 24/7
  • Helps reduce bouncing at the rear of vehicle when towing
  • Manufactured in the United States

This Hellwig Helper Spring set the standard for all other aftermarket helper springs. Featuring Progressive Spring Rate and Fulltime Spring Rate design, this spring is the workhorse of the Hellwig Spring line. With the Progressive design the vehicle must be loaded and its spring compressed to activate the Hellwig Spring, therefore as the vehicles load increases the Hellwig Helper Spring progressively increases its resistance to the load. In the Fulltime design the Hellwig Spring immediately reacts to the vehicles load, therefore compressing very little as load is applied to the vehicle.

Manufactured with heat treated ASTM 5160 alloy spring steel these units increase your vehicles level load carrying capacity up to the manufacturer’s Gross Vehicle Weight Rating. Designed to install on full size pick-up trucks and vans, this unit requires mounting hardware to accommodate 2 1/2 or 3 wide leaf springs. When ordering be sure to identify the spring kit and the appropriate mounting hardware kit to complete the installation. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. “Set it and forget it”. The LP 25 is rated at 2500lbs level load carrying capacity and the LP 35 is rated at 3500lbs level load carrying capacity, not exceed the vehicles Gross Vehicle Weight Rating. Heavy Duty Load Control Applications.

Should you need to replace specific bushings that have become damaged, select only the bushing kit. Polyurethane bushing construction provides superior squish resistance and resists degrading, drying, and crumbling the way rubber bushings can. Not only will these bushings retain their performance characteristics in the most extreme temperatures, they will resist degrading after being exposed to road grime, salt, and oily contaminants found on almost every road.

Hellwig's® history began in 1941 with a patent Rudy Hellwig had been granted for an overload spring design he had developed and perfected. Hammering out the springs by hand in a rented blacksmith shop in Kansas, Rudy moved to California after the end of World War II, steel rationing made materials more widely available. Founding Hellwig Products in 1946 out of Glendale, California, Rudy began manufacturing springs that restored ride height, stability, and control to trucks and campers weighed down with heavy cargo. Rudy's philosophy was to build products that exceed customer's expectations in both performance and durability, and his business practices of taking care of customers after a sale quickly built the company a positive reputation. After a 1963 Hot Rod Magazine feature showed how effectively Hellwig adjustable stabilizers eliminated handling problems inherent in stock Chevrolet Corvair suspensions, word of the company's products spread.

Brand:
Part Number:
61903
UPC:
745662619039

Installation

Hellwig® - Pro Series™ Helper Springs InstallationHellwig® - Pro Series™ Helper Springs Installation

Vehicle Fitment

Ford
F-150 1980-1981, 1983-1984, 1986-2004
F-250 1980-1998
F-350 1980-1997

Reviews

(0)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Hellwig® 61903 - Pro Series™ Rear Helper Springs
/0

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
CARiD FacebookCARiD TwitterCARiD YouTube ChannelCARiD PinterestCARiD Instagram
Inspiration Gallery
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS