Universal Steering Wheel Puller by Grant®. This specially shaped puller piece is designed to apply the specific pressure needed to remove any original steering wheel or previously installed Grant wheel from your vehicle’s steering shaft. Simply remove the main nut from your steering wheel hub, then attach the puller piece to your steering wheel. Bolts supplied with the kit tighten against the steering column to apply pressure needed to push your wheel loose from the shaft. Is not harmful to any steering wheel or shaft components.
- Tightens gradually to apply specific pressure needed for pulling steering wheel off the shaft
- Works without any hard blows or putting undo stress on steering column components
- Stainless steel construction for maximum strength
- Kit contains ten bolts, three washers, and one attachment plate needed
- Wheel puller plate bolts on easily without complex installation
- All how-to instructions are included
Grant’s easy-to-use Steering Wheel Puller lets you quickly and easily remove your steering wheel to swap a new one on, replace a turn signal switch, repair wiring, or make adjustments to steering column parts. Because it attaches to both the steering column and the steering wheel itself, pressure is applied gradually by tightening bolts to budge the two items apart. Unlike “knockoff” steering wheel pullers that require hammering on the wheel, this puts no undo stress on steering column shaft and bearing components. Simply straighten the wheel dead forward, disengage the car's electrical system to avoid any electrical shocks, remove the horn center cap, and wrench off the retaining nut. Mark the shaft with a felt tip pen at the 12 o'clock position where the wheel meets the shaft so you’ll know where to place the new steering wheel. Attach the puller around the steering shaft and to the tapped holes on your steering wheel hub, then insert bolts and tighten them to push the two items apart.6.17Brand: Grant Part Number: 5891 UPC: 081126058915
Since 1922, Grant Products has been a leader in the field of automotive products. After getting its start with engine overhaul kits and parts, Grant became involved in automotive racing and supplied many engine components that set records on the salt flats of Bonneville and on the pavement of the Indianapolis Speedway. Grant diversified into steering wheels for race cars in the 1960s and pioneered many advancements using woods and plastics in construction. After introducing tilt-wheel conversion kits and street-legal quick release steering wheel kits for theft prevention, the company became so successful with their steering wheel line they opted to focus solely on it. Today, Grant Products produces a wide range of modern and retro style steering wheels for boats, heavy trucks, ATVs, golf carts as well as passenger cars. When a well-made, stylish custom steering wheel is what you want, Grant® is the only name you need to know.
Product Reviews (0)
Product Reviews (0)