Product Details
Aluminized Steel Header-Back Exhaust System with Split Rear Exit by Flowmaster®. Exhaust System Type: Header-Back. Exhaust Tubing Material: Aluminized Steel. Main Tubing Diameter: 2.5". Exhaust System Sound: Aggressive / Loud. The Installer Series Pipe Kits are made for professional installations. They offer the same mandrel bent 16-gauge aluminized pipes of the Flowmaster header-back systems, but without the hangers and mufflers. They are made for custom built exhaust systems on modified vehicles.
Notes
- Mufflers Not Included (Use with Offset Inlet - Offset Outlet Mufflers)
- Remember to check your local and state laws regarding vehicle noise restrictions
Specifications
Exhaust System Type: Header-Back |
Exhaust Tubing Material: Aluminized Steel |
Exit Location: Split Rear |
Exit Configuration: Dual |
Main Tubing Diameter: 2.5" |
Exhaust System Sound: Aggressive / Loud |
Finish: Gray |
Includes
- (1) 64-67 Hanger Mount (L) (Part Number 298HA)
- (1) 64-67 Hanger Mount (R) (Part Number 297HA)
- (1) 68-72 Hanger Mount (L) (Part Number 290HA)
- (1) 68-72 Hanger Mount (R) (Part Number 289HA)
- (1) H- Pipe Assembly (Part Number 16008)
- (1) Parts Kit (Part Number PK119)
- (1) Tailpipe Hanger (L) (Part Number 488HA)
- (1) Tailpipe Hanger (R) (Part Number 487HA)
- (1) Tailpipe, Left (Part Number 16154)
- (1) Tailpipe, Right (Part Number 16155)
- (2) 5/16" Flat Washer
- (2) 5/16" Nut
- (2) 5/16" x 1" Bolt
- (2) 5/16" x ¾" Cutting Bolt
- (2) Bent Exit Pipe (Part Number 16156B)
- (2) Clamp Hanger Assembly (Part Number 489HA)
- (2) Connector Pipes, (R/L) (Part Number 16157)
- (2) Rubber Isolator (Part Number HA168)
- (2) Straight Exit Pipe (Part Number 16156A)
- (2) Tailpipe Hanger(R/L) (Part Number HA572)
- (4) 2 1/2" Clamps (Part Number MC250S)
- (4) 5/16" Lock Washer
- (4) Push-On Hanger Keeper (Part Number HW502)
Features
- Improve Exhaust Scavenging by Accelerating the Exhaust Gases
- Improve Torque and Throttle Response
- Retain Classic Flowmaster Sound
- Mandrel Bent 16 Gauge Stainless Steel Tubing and Stainless Steel Muffler Assembly
- Well Suited to Muscle Car Applications
The Installer Series Pipe Kits are made with modified trucks in mind. The kits make it easier and quicker to build a custom exhaust system for these vehicles, as the basic bends are already there. The kits require offset/offset or offset/center mufflers, hangers and tips for completion of exhaust systems.
Flowmaster® has its roots in solving the engine noise problems encountered by California racers in the 1980s. In 1983 Flowmaster’s founder, Ray Flugger, created his first patented design of racing silencers, which dampened noise with minimal loss of power. Ray attached handles to ease carrying the square shaped race mufflers through the race pits, and the mufflers became known as the "suitcase mufflers." Today, the innovative Flowmaster mufflers are the result of years of development with top race engine builders, thousands of hours of dyno research and "real-world" on-track testing.