Company bumpers are designed to be compatible with the airbag, but they Currently do not claim airbag compatibility because our bumpers have not been crash tested. The more they have researched this specific subject they have found that the only way for true compliance is to do an actual crash test. Because these are costly, they do not at this time claim our bumpers to be airbag compatible. They have had customers report airbag deployment in collisions.
Please note however, that the air bag itself is not directly connected to the bumper. The bumper itself may affect the crush rate of the vehicle. The sensors that detect crashes, are independent of the bumper and usually are mounted on the body or in the dash. They detect rapid changes in motion/acceleration.
CAN YOUR FRONT BUMPERS STAND UP TO IMPACT WITH A DEER?
Personally the author has not had the opportunity to test this (thankfully). The diamond style bumper was designed for a customer with that particular request however, and many customers purchase the Diamond and Bull Bar bumpers to protect from impact with animals in particular. So far so good…
CAN I GET A CUSTOM COLOR?
They typically do not do custom powder coats as it takes longer and is more expensive, but recommend that customers wanting a custom coat order our products without coat (“bare”) and have them custom coated locally. Pulley Block: Also referred to as a snatch block. Using a pulley system, allows you to double the strength of your winch.
WILL THE BUMPER WEIGHT CAUSE MY VEHICLE TO SAG?
Sag will likely occur over time. Their show vehicle has approx ¾” of sag over the year and a half it has been on. If you want to stick with a stock set-up, coil spring spacers can be easily added. Otherwise, a spacer lift will even your vehicle out. If you’re using an OME suspension, they recommend you use medium springs. If you are using a coil over, the shocks will be adjustable.
WILL BUMPER WORK WITH A TRD SUPERCHARGER?
Yes, with some serious modification to your charger.
CAN I DO A CUSTOM LIGHT IN THE JK FRONT BUMPER?
Can I do a custom light in the JK front bumper? Company full width front bumper is set up to utilize your stock fog lights however, a custom port can be done if you would like to use the PIAA 510 light.