Universal Flange Type Bushings by Energy Suspension®. This is a set of 4 “flange” type bushing halves and 2 zinc-plated reinforced steel tubes designed with a protruding rim for extra strength on control arms, track rods, link rods, engine/trans subframe mounts, tire carrier racks, and much more. Resilient polyurethane offers greater resistance to deterioration from road grime, oil leaks, and salt slush without drying out or crumbling the way rubber mounts can. Available in a choice of colors and dimensions.
Outer Tube Dimensions Bushing Dimensions Inner Sleeve Dimensions Fastener I.D L Wall Thickness (T) O.D. I.D Barrel Length (L) Flange O.D. Flange Thickness (T) O.D. I.D. L Bolt Dia. (D) Part# 1.125 1.062 0.125 1.140 0.750 0.500 1.390 0.187 0.750 0.500 1.400 1/2 9.9105 1.125 1.037 0.125 1.140 0.750 0.500 1.390 0.187 0.750 0.562 1.375 9/16 9.9106 1.250 1.312 0.187 1.265 0.750 0.614 1.630 0.219 0.750 0.500 1.750 1/2 9.9107 1.250 1.312 0.187 1.265 0.750 0.614 1.630 0.219 0.750 0.562 1.750 9/16 9.9108 1.125 1.480 0.125 1.140 0.812 0.715 1.375 0.139 0.812 0.625 1.750 5/8 9.9111 1.375 1.650 0.187 1.382 0.875 0.829 1.782 0.285 0.875 0.500 2.250 1/2 9.9482 1.500 1.960 0.250 1.510 0.750 0.950 1.975 0.207 0.750 0.500 2.375 1/2 9.9483 1.750 1.350 0.250 1.760 0.875 0.600 2.178 0.250 0.875 0.562 1.875 9/16 9.9484 2.000 2.075 0.250 2.040 0.875 1.000 2.500 0.220 0.875 0.625 2.530 5/8 9.9106 1.750 2.550 0.250 1.760 0.872 1.220 2.195 0.187 0.875 0.625 2.930 5/8 9.9488 1.500 1.960 0.250 1.510 0.750 0.950 1.975 0.207 0.750 0.562 2.375 9/16 9.9489
- Set of 4 “flange” type bushing halves and 2 zinc-plated reinforced steel tubes designed with a protruding rim used to for extra strength
- Features universal design that can be used to dampen vibrations at mounting points for control arms, track rods, link rods, engine/trans subframe mounts, tire carrier racks, and more
- High-density polyurethane construction provides superior flexibility and resistance to tearing, degrading or crumbling in comparison to OEM rubber boots
- Energy Suspension high-pressure endurance tests made in a range of extreme temperature conditions show HYPER-FLEX polyurethane bushings last 5 to 10 times longer than conventional rubber ones
- 2-year manufacturer warranty
- Proudly manufactured in the United States
Many original equipment flange bushings found at key mounting points for your engine, transmission, control arms, track rods, link rods, subframe assemblies, and more are all made of soft rubber. They’re purposely built that way to provide a high degree of smoothness and vibration isolation for the majority of customers who drive in a less aggressive manner. Those OEM bushings are excellent for mainstream driving when powertrains and suspensions are left unmodified. However, when performance add-ons are installed, stock mounts often crack, tear, leak and sag. Because compromised bushings can no longer effectively do their job, the engine can shift position – leading to detrimental effects on drive shafts and axles that were designed to operate at perfectly straight angles. Energy Suspension offers bushing kits designed to be used universally where any flange type bushing is needed. You’ll find packets of flange bushings sold in multiple amounts, sizes, and colors.
Polyurethane construction provides stronger, more resilient cushioning to prevent harsh vibrations being transferred to the passenger area, and its durable construction will not collapse, deform, or crumble the way rubber can. Polyurethane offers the ability to stand up and perform extremely well under extreme temperatures and resist degrading after being exposed to road grime, salt, even leaking oils or other vehicle fluids. Energy Suspension proudly manufactures all components in the United States, and backs them with a 2-year warranty against failure due to manufacturing defects.9.50 21.38
Brand: Energy Suspension Part Numbers:
Founded in the early 1980s in San Clemente, California, Energy Suspension has specialized in the development and improvement of polyurethane, and has always been a believer in finding ways to use it to create products that improve automotive performance. Since the company’s earliest days, their mission has been to be number one in quality, product lineup, and customer service when it comes to polyurethane bushings, mounts, and other vibration-dampening grommets. Today, their worldwide presence, loyal yet expanding customer base, and industry-wide respect show their efforts have paid off. Energy Suspension has achieved many firsts in the world of polyurethane suspension products, and CARiD offers best prices on many of them here. In an independent test done by Mopar Muscle magazine, a late model Dodge Challenger Hemi was fitted with Energy Suspension polyurethane bushings throughout all steering and suspension components. While the ride was still comfortable after the change, the improved Challenger’s lap times dropped consistently from 76 seconds with OEM rubber to 74 seconds with the polyurethane bushings. Their more resilient nature resisted crushing and warping under pressure – in turn, leading to reduced body lean and better tire grip which allowed faster speeds around turns. Considering races are often won by a fraction of a second, it’s easy to see the significant benefits that Energy Suspension bushings can bring to your car or truck.
Product Reviews (0)
Product Reviews (0)