3GD Series Dimpled and Slotted Sport Front Vented Rotors (GD7047) by EBC®. Outside Diameter: 304.8mm (12") x 29mm (1.14"). Bolt Pattern: 140mm. 1 Pair. These replacement rotors feature both slots and drilled dimples to provide the superior level of cooling needed for high performance street driving, trailer towing, 4x4 use, drifting, and short track runs. Anodized finish provides corrosion resistance on non-contact areas. The anodized layer is designed to disappear in the area that the brake pads contact the rotor. Recommended for use with EBC Greenstuff 6000/7000, Yellowstuff, and Redstuff pads.
- EBC recommends use with Greenstuff 6000/7000, Yellowstuff, and Redstuff pads
- Angled slots on rotor surfaces allow superior expulsion of heat, water, brake dust, and friction gases
- Round indents in the rotors surface further increase cooling without the risk of cracking that drill-through holes pose
- Rotors feature either gold anodized finish or black anodized finish depending on vehicle make and model to provide corrosion protection for all non-contact areas
- Brake rotors are unidirectional to the left and right side of your vehicle to maximize effectiveness
- 3GD vented centers feature a wider aperture for air to pass between both rotor sides for superior cooling
- EBC recommends a 500 mile break in period with lighter braking application
- 6-month/3,000 mile manufacturer warranty against premature rotor wear under normal driving conditions
- Dimples are resistant to cracking compared to drilled holes
- Slots increase pad bite and de-glaze pads
- Create an escape route for debris, dust, and water
- Reduce stopping distances in wet weather
- Resistant to warping and fading
EBC pioneered brake rotors with dimple-drilled round indents decades ago to provide a solution to cracking problems that sometimes plague perforated rotors operating under high stress and heat conditions. What makes the 3GD Series Dimpled and Slotted Sport Rotors superior is the presence of both these dimpled indents and straight vent slots. Combined, they provide the superior expulsion of heat, water, brake dust, and friction gas that is needed to keep rotors cool and functional during street performance driving in any weather. Additionally, 3GD rotors feature a wider vented aperture for air to pass between both rotor sides, so metal expands evenly during use and the chance of warpage is minimized. 3GD rotors are designed for use with EBC Greenstuff 4x4 brake pads, Greenstuff 2000 compact car pads, Yellowstuff heavy duty 4x4 brake pads, and Yellowstuff / Redstuff pads created for shorter high performance street or track runs and drifting. 3GD brake rotors are anodized to prevent corrosion, and rotors should be fully ready for use after the first 500 miles of moderate brake application.
World-renowned brake experts at EBC have developed over a dozen variations of performance brake components, and each one is crafted to provide a superior level of grip, wear, and performance for uniquely different vehicle sizes, weights, and applications. When the company engineers who created pads that can survive 1,800 degree temperature test runs turn their attention to creating equally impressive brake rotors, you will see rotors finely tuned to deliver impressive looks behind your wheel spokes and last run performance that’s as equally impressive as your first. If you’ve been let down by underperforming brake rotors that didn’t last as long as they should, 3GD Series Dimpled and Slotted Sport Rotors are designed for the long run. If installed at the same time as a new set of EBC long life brake pads, it’s not uncommon for these rotors to last the length of the first set with more than enough life to be used with a second set. All EBC brake rotors are cast to a high metal strength rating of 150 newton meters and are precision CNC machined to be within tolerances of less than 0.05 millimeters. 3GD Series Dimpled and Slotted Sport Rotors are the result of relentless testing and refinement, and when better brake rotors are built it is EBC that will build them.277.53Brand: EBC Brakes Part Number: GD7047 UPC: 840655062592
Founded and based in the United Kingdom, EBC Brakes is a premiere producer of brake components for passenger cars, trucks, buses, motorcycles, ATVs, and even scooters. EBC brake pads and rotors are preferred by fleet operators of emergency vehicles, livery cabs, and by discerning racers all over the world for the effective grip, superior lifespan, resistance to heat buildup, and proper fit they deliver. From the company president down to every employee, EBC strongly believes that brake components that are truly superior must be constructed from the most effective materials and also offer the lowest environmental impact possible. Likewise, EBC will never put their name on any products that cut corners in development, quality control, or are manufactured using sweatshop working conditions where human rights are not valued. When you want the best, most responsible brake components that meet or exceed OEM specification without dealer OEM markup, EBC Brakes is the only name you need to know.
- Vehicle FitmentThis part is compatible with 75 vehicle(s)
Year Make Model Fitment Notes 2010 GMC Savana 2500 Base / LS / LT 6.0L 2009 GMC Savana 2500 Base / LS / LT 6.0L 2008 Chevy Avalanche 2008 Chevy Express 1500 2008 GMC Savana 2500 6.0L 2007 Chevy Avalanche 2007 Chevy Express 1500 2007 GMC Savana 2500 6.0L 2006 Cadillac Escalade Escalade / Escalade ESV / Escalade EXT 2006 Chevy Avalanche 1500 4WD (Four-Wheel Drive) 2006 Chevy Express 1500 / 2500 2006 Chevy Silverado 1500 Extended Cab Gas 2006 Chevy Suburban 1500 Base / LS / LT / Z71 2006 Chevy Tahoe 2006 GMC Savana 2500 6.0L 2006 GMC Sierra 1500 Extended Cab Electric/Gas / Gas 2006 GMC Yukon Yukon XL 1500 2006 GMC Yukon Denali Yukon Denali / Yukon XL Denali 2005 Cadillac Escalade Escalade / Escalade ESV / Escalade EXT 2005 Chevy Astro 2005 Chevy Avalanche 1500 2005 Chevy Express 1500 / 2500 2005 Chevy Silverado 1500 Hybrid / SS 2005 Chevy Suburban 1500View All
Product Reviews (0)
Product Reviews (0)