The spark plug is a critical device that supplies the spark (or flame front) for your car, truck, motorcycle or small engine. However, the basic plug design really hadn't changed that much since the original ones used by Henry Ford back in 1904. E3 was formed to find a better design that would provide customers with performance advantages such as increased power, improved fuel efficiency and reduction in hazardous engine emissions that can contribute to global warming.
With decades of experience in spark plug engineering and automotive aftermarket, the principals of E3 Spark Plugs realized that the key to producing a better spark plug did not lie in the use of fancy metals, such as iridium or platinum. Instead, it would require an entirely new approach in the design of the plug's electrode to improve ignition of raw fuel inside the engine's combustion area. The first step would be to get rid of the antiquated J-wire electrode.
E3's initial research started in its own laboratories and led to the testing of new designs at two leading engineering universities. After investing in years of research and assisted by top professors in the field of combustion and engine dynamics, the DiamondFire electrode was developed as a better way to ignite the fuel-air mixture inside the engine's cylinder. Since this advanced design increased the combustion pressure inside the engine before raw fuel was exhausted, they had discovered a better way to control the burn.
A faster flame speed and improvements in directing the spark inside the combustion area resulted in a marked (and proven) increase in power output, fuel efficiency and reduced emissions for gasoline-powered engines. These results were validated using some of the most sophisticated testing equipment available. Over and over again, the new plug burned fuel more efficiently, improved power response and cut toxic emissions. Today, E3 remains dedicated to reducing greenhouse gas emissions by limiting the amount of unburned fuel.
Simply stated, E3 Spark Plugs are Born to Burn.