DynoMax® 19428 - Ultra Flo™ Aluminized Steel Cat-Back Exhaust System with Single Side Exit

2 reviews|Item # mpn2197108|Similar Products
$375.40
In Stock (3)
Vehicle Specific
  • Please Select Vehicle Below
Notes:
  • Remember to check your local and state laws regarding vehicle noise restrictions.
Authorized Dealer

Vehicle Fitment

MakeModelYear
DodgeRam 2006-2008

Product Details

Ultra Flo™ Aluminized Steel Cat-Back Exhaust System with Single Side Exit (19428) by DynoMax®. Exhaust System Type: Cat-Back. Exhaust Tubing Material: Aluminized Steel. Main Tubing Diameter: 3". Exhaust System Sound: Aggressive / Loud. Ultra Flo™ Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. All Dynomax® Performance Exhaust Systems bolt on for easy installation. Your vehicle's complete exhaust can be quickly and easily customized with an emissions-legal premium performance system.

Notes

  • Remember to check your local and state laws regarding vehicle noise restrictions.

Specifications

Exhaust System Type: Cat-Back
Exhaust Tubing Material: Aluminized Steel
Exit Location: Angle
Exit Configuration: Single
Main Tubing Diameter: 3"
Exhaust System Sound: Aggressive / Loud
Muffler Series: Ultra Flo™ Welded
Muffler Quantity: 1
Tip Material: Polished Stainless Steel
Tip Outlet Diameter: 4"
Clamp Count: 4
Clamp Type: Band

Includes

  • (1) 3" Band Clamp (Part Number 33272)
  • (1) Hanger (Part Number 36318)
  • (1) Inlet Pipe (Part Number 56080)
  • (1) Instruction Sheet (Part Number 702136)
  • (1) Muffler (Part Number 17235)
  • (1) SS Spout (Part Number 36388)
  • (1) Tail Pipe (Part Number 55284)
  • (2) 3" U-Bolt Clamps

Features

  • Unrestricted, straight-through design for a dyno-proven increase in horsepower and torque
  • Ultra Flo Welded muffler will give your car a deep performance tone
  • Stainless steel construction for exceptionally long service life
  • 100% welded design for long-lasting durability
  • Continuous perforated tube interior construction
  • CRF (Continuous Roving Fiberglass) technology absorbs unwanted interior resonance
  • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower
  • “Micro finish” technology creates blemish-free, satin muffler exterior finish
  • Bolt on for easy installation
  • Covered by a Limited Lifetime Warranty

Get more power for your car with a deep performance tone with the DynoMax Ultra Flo DPF-back exhaust system. The Ultra Flo Welded performance muffler will give your truck a powerful throaty tone while providing effective dampening of unwanted interior resonance thanks to CRF (Continuous Roving Fiberglass) technology. Its 100% welded stainless steel construction forms a basis for maximum durability and lifelong protection.

The muffler's straight-through design with a continuous perforated pipe inside allows for free flow of exhaust gases and reduces back pressure for increased horsepower and torque. The pipes included in this system are constructed using mandrel bending machines to eliminate serrations and maximize exhaust flow. Improved, unrestricted flow is one of the most important factors in gaining horsepower and torque. The pure unadulterated power of the Ultra Flo Welded DPF-Back Exhaust System is covered by a limited lifetime warranty and 90-day Performance & Sound Guarantee to make sure it fully meets your expectations.

DynoMax®, a member of the Tenneco conglomerate that also includes well-known names such as Walker, Monroe, Kinetic, etc., is one of the leading North American manufacturers of performance exhaust products. Built on over 25 years of market leadership, it centers on engineering and launching new systems that feature a quality sound, ultimate performance, and long-lasting durability - everything expected from premium exhaust component. The DynoMax Performance Exhaust product line, consisting of a wide variety of mufflers, pipes, and exhaust systems, was first introduced by Walker in 1987. Driven by the theme "Pure, Unadulterated Power," the brand is committed to creating groundbreaking products that reveal the true nature of any vehicle.

Brand:
Part Number:
19428
UPC:
086387194280
Alternate MPN:
19428

Reviews

(2)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
DynoMax® 19428 - Ultra Flo™ Aluminized Steel Cat-Back Exhaust System with Single Side Exit
/5
1-2 of 2 Reviews
5 of 5
Bang For Dollor
DynoMax® 19428 - Ultra Flo™ Aluminized Steel Cat-Back Exhaust System with Single Side Exit
It is a lot quieter than I thought it was going to be, super simple install done on jack stands with standard tools, if you are looking for just a dash over factory this is the one for you.
Posted by Customer / June 17, 20202006 Dodge Ram
5 of 5
Great Exhaust Kit
DynoMax® 19428 - Ultra Flo™ Aluminized Steel Cat-Back Exhaust System with Single Side Exit
This kit was super easy to install. And it sounds great on my truck. Definitely worth it.
Posted by Anthony (Constantine, MI) / June 15, 20182007 Dodge Ram

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
CARiD FacebookCARiD TwitterCARiD YouTube ChannelCARiD PinterestCARiD Instagram
Inspiration Gallery
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS