Duraflex® - Mesh Grille

Name: Duraflex® - Mesh Grille
Brand: Duraflex
SKU: sp22841
Rating: 3.3 (3 reviews)

3 reviews|Item # sp22841|Similar Products

Grille Type Information Duraflex Authorized Dealer

$89.00 - $499.00Save: up to 33%

$60.35 - $339.15

Availability Varies - Depends on Product Options

Vehicle Specific

View Product Options

Authorized Dealer

Have a Question? Ask a Specialist

800.505.3274Live Chat

Product Details

Mesh Grille by Duraflex®. The front of your car will stand out from the crowd with this custom Grille. It's good looking, light and durable. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else.

Features

Hand laid, high quality 6 oz. fiberglass
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%
Limited warranty
Intended for off-road or show use only

Duraflex combines fiberglass, plastic and flex resins for a unique part that is stronger than regular fiberglass. Duraflex will flex instead of crack and bend instead of break. It means that when you have an appointment at the body shop, you won't have to cancel because your bumper arrived in the box broken. And your installer will have an easier time of it because Duraflex parts are more flexible than regular fiberglass. Every Duraflex high quality mesh grille comes complete with black primer finish, hardware kit and installation instructions. Duraflex parts require very little trimming and are ready to install.

Duraflex® is recognized as one of the premier aerodynamic body part manufacturers in the world. Since their inception in 2000, the company has been dedicated to quality, value and customer service, consistently exceeding industry standards. Today, Extreme Dimensions offers over 7,000 products in carbon fiber, polyurethane and fiberglass. The company employs over 300 people at their 100,000 square feet U.S. headquarters and 200,000 square feet overseas manufacturing facility. Manufacturing and distributing the most innovative and largest selection of aerodynamic products in the industry, Extreme Dimensions’ focus is always to meet the needs of the automotive and truck markets.

Warranty

All body kits and products sold by Duraflex are aftermarket products and are intended for off-road or show use only. The brand is not liable for any damages or injury as a result of the use of its products. Due to the material and processes used in production, products will not be a “direct bolt-on.” Duraflex products may need prepping, sanding, shaving, filling gaps, and/or other body work. Modifications may include removal of the reinforcement bars, bumpers, turn signals, and other safety equipment on the vehicle. Duraflex highly recommends that a professional “custom” shop with fiberglass body kit experience perform the installation. Auto shops experienced in OEM installations may not be experienced in aftermarket fiberglass installations. All products sold by Duraflex are for off-road and show purposes only. Due to strict regulations by the Department of Transportation, some of these products are not approved for street/highway use. The brand does not recommend, and in fact discourages, these parts to be used on public streets and highways.

LIMITED WARRANTY

Duraflex warrants its branded products to be free from manufacturing defects in workmanship and materials when used for their intended purposes. This warranty is non-transferable. Any part of a Duraflex product that is covered by this warranty and that is found in reasonable judgment to be defective in materials or workmanship will be replaced in full at the request of the customer. For example, Duraflex will not replace a complete body kit if a single component is found to be defective. The following situations are not covered by warranty: Any Duraflex product that has been subject to misuse, neglect, accident; or that has been improperly installed. Any Duraflex product that has been modified or altered from its original manufactured state.

Hood and Trunk Fitment Guarantee

Duraflex stands behind the fitment of its products. Once your hood is installed, Duraflex will fully replace your hood if it does not fall within the following guidelines of the brand’s Fitment Guarantee. Hood does not clear a stock engine. Gaps between the hood and the fenders are more than 1/2″ wide on each side. Hood levels more than 3/8″ higher or lower than the fenders. Latch is too long or too short compared to the stock latch, causing the hood not to latch after adjusting. Duraflex does not guarantee fitment on vehicles that have been involved in accidents and/or have had body damages or customization. Hood pins are required.

Trunks

Gaps between the trunk and the rear fenders are more than 1/2″ wide on each side. Trunk levels more than 3/8″ higher or lower than the rear fenders. Duraflex does not guarantee fitment on vehicles that have been involved in accidents and/or had body damages or customization.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(3)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Duraflex® - Mesh Grille

1-3 of 3 Reviews

Sort by

1 of 5

Nothing Good About It

Duraflex® - 1-Pc H-2 Style Main Grille

I got the package the day it was expected which is good. I get a box that is at least 10 times the size of the grille with layers upon layers of bubble wrap, which is a good thing but it was TOO much to even think about it, such a waste. I then as I finally get through 10 layers of bubble wrap and tape, I look at it and it had bumps and dings all over the fiberglass! I had to use filler to smooth it out and make it at least presentable to the car. The fitment though let me tell you it was awful, it didn't have anything to hold it in place and didn't mold even close to well on the car, gaps everywhere. I had to rig it in a sort of way with some spare plastics to hold it in place so it doesn't fall off and had to heat it up to make it fit the bumper good. The mesh grille was silver and held by 4 bendable thick wires that made it wiggle everywhere and not sit firmly into the fiberglass mold. I would rate this 0 stars but there is no option so I picked 1 star, I would never recommend to anyone unless you want to spend 4 hours reshaping and fitting it.

Posted by Eric (East Palestine, OH) / January 23, 20222010 Hyundai Genesis Coupe

5 of 5

Great Looking Product!

Duraflex® 104215 - Vortex Style Fiberglass Main Grille

This is a great looking product according to the picture and details, but it doesn't actually fit my 2002 Camry as expected. There is a huge gap between the top of the grille and the hood. This was the hottest grille I could find, and would love to have the right one if it is available. Customer service so far has been great working to resolve the issue. Stay tuned for updates 04/05/2017.

Posted by Rafael (Richmond, VA) / April 05, 20172002 Toyota Camry

4 of 5

Quality

Duraflex® - 1-Pc Open Mouth Style Mesh Main Grille

Looks great but there were imperfections in the fiber glass that I was disappointed with.

Posted by Brandon (Kanata, ON) / December 17, 20162008 Mazda 3

Duraflex® - Mesh Grille

Product Details

Features

Related Links

Reviews