Class 3/4 Black Utility Ball Mount for 2" Receivers by Draw-Tite®. 5000 lbs GTW / 500 lbs TW, 1" Ball Hole. These ball mounts fit an industry-standard receiver hitch mount. Simply choose the correct-rated and correct-sized ball to match. Lifetime warranty.
- Fits standard square receiver tube opening
- Mounts are powdercoated black over e-coat, unless marked otherwise
- Fabricated from steel tubing or solid bar stock, depending on weight rating
- All welds MIG welded for strength and security
- Close tolerances to reduce rattle in receiver
- Available different overall lengths for correct clearance from bumper
You'll need to choose your ball mount carefully. The most important consideration is the weight of the trailer you'll be towing, followed closely by the GTW (Gross Towing Weight) of your tow vehicle. Be certain that every single component – receiver, ball mount, and ball – on your vehicle is rated to tow the biggest trailer you'll ever tow. (Don't forget that odds are, eventually someone is going to ask you to tow their trailer, not yours. Their big, heavy trailer.) We recommend rating the ball mount and ball to match the maximum towing capacity of your vehicle, not the weight of the trailer you want to tow today.
Choose a ball mount that will make your trailer as level as possible when the hitch is coupled. You may need a mount with some drop or rise, depending on the trailer and tow vehicle's relative heights. Don't forget to account for the tow vehicle squatting when it takes the weight of the trailer on the hitch.
Remember to keep the ball mount as short as feasible, because the further the ball is behind the rear axle, the more the trailer will steer the tow vehicle on a windy day. Also, the further back the ball is, the more the tongue weight of the trailer will push down your rear suspension.21.58 31.73
Brand: Draw-Tite Part Numbers:
Draw-Tite is the premier brand of custom trailer hitches. Established in 1946 and created with a passion for outstanding performance the brand has come to represent one of the best custom fit vehicle products available today. Each hitch design must pass rigorous testing to become TESTED TOUGH™. The addition of increased tongue weight capacity and an all new accessory pairing guide make the Draw-Tite brand your best choice for years of dependable service.Product Reviews (3)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Draw-Tite® - Class 3/4 Utility Ball Mount for 2" ReceiversAverage Rating: 5 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYAll Draw-Tite Reviews(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY1999 Acura SLX | Posted by Lester | (Englewood, NJ)
Good, thanks.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2012 Honda CR-V | Posted by Stephen | (Salisbury, MA)
Good quality.1 people found this review helpful.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2000 Chevy Blazer | Posted by Kelvin | (Escondido, CA)
This was a very well constructed ball mount. It is a solid piece of metal extremely heavy. I was very pleased with the way it was made. If you are looking for a good ball mount to use with pulling a heavy travel trailer this is it.3 people found this review helpful.Was this review helpful for you? YesNoShare this review:
Product Reviews (3)
Product Reviews (3)
You will never pay more with CARiD! Not only will we match prices from any competitor's website or other reputable source, we will continue to honor that promise for up to one year after your purchase.
We'll match the price at time of purchase, or refund you the difference if done after the purchase. Either way, we are totally committed to providing you the best online shopping experience.
We're car and truck enthusiasts, just like you! And it's enthusiasts we hire in our Sales and Service Centers. Many of our staff are ASE certified and have spent years in the retail auto business.
We conduct our own in-house training, and we even bring vendors to us for hands-on product training demonstrations. You're getting true expertise when you phone or email us!
With hundreds of vendors, and tens of thousands of components for sale, we put tremendous effort into coordinating our data with our vendors' data in order to guarantee that you get the correct part.
Our huge database is regularly cross-checked to keep it current and optimized. At times, our thoroughness makes our data even more accurate than our suppliers! This rigorous process means that you can always order with confidence.