Check the tires used frequently
When checking tires, the inside of spare tires should be checked, including the tire pressure. Observing whether there are drum, crack, cut, nail or abnormal tire surface damage. It is possible to cause tire broken if using damaged tires. When driving in the road of many holes, rocks or other obstacles, tire damaged or bad positioning may happen, so driving in this kind of road, the driver should drive slowly and carefully. And checking the tires of any damage after driving through these road, such as, cut, drum, nail, abnormal wear.
Checking tire pattern regularly
Please check the patter depth of tire timely and change new tire when the old tire damaged to some extent. In this way, the largest tracking force and ground grabbing force could be guaranteed , and avoiding some unpleasant accidents.
The safety of a car depends on a better pattern depth, the reasons are as follows:
As to the tire performance and life span, the correct air inflation is the key, and also important to the driving experience and security of the car. tire bears the complete weight of the car, they could not work normally when the inflation not sufficient or over .the tire damage could be caused when the inflation not sufficient.
Checking tire pressure monthly
Recommended tire pressure
What should you do when having no idea of the correct tire pressure?
Very simple, the following information could be found easily in your car:
The pressure data suggested by car manufacturer would be show on the tire. The inflation pressure shown on the side of tire only means the max inflation pressure under the cold condition.
Valve and valve cap
To make sure the correct tire pressure, the valve maintenance is very essential. The valve cap is made from rubber, so it would ageing as time went by. So, the valve cap should also be changed when buying new tires. When drived in high speed, the aged broken rubber valve rod would change bend under the Centrifugal force, causing leak. Valve cap is also a very important component. High quality valve cap could help to keep tire pressure when valve broke due to various reasons. Valve cap could prevent moisture, the moisture getting into tire may frozen and compress valve, causing leak. Besides that, valve cap could also prevent the dust particles, avoiding the affection to valve and cause leak.
The harm of insufficient pressure
Insufficient pressure would cause tire side transform hardly, heat increased, lower tire life span extremely,and cause problem below and safety hidden danger:
The harm of over pressure
Over pressure would cause the area between tire face and ground getting smaller, tyre rigidity up, buffer down, and cause following question also:
After assembling, the dynamic balance could make compensation to tire and rim weight. When weight of one component is heavier or lighter than other part, the tire would lose balance. This could result in irregular tire wear and car body trembling, increasing pressure from front component and early over wear.
Why It is important to do balance adjustment?
When weight of one component is bigger or smaller than that of other component, tire would be out of balance. What will lead to:
When should we adjust tire balance?
Delinte tips: once finding car body trembling or tire surface abnormal wear, please check tire balance and four tire positioning, checking out whether there is mechanical component wear or damage.
Four wheels positioning usually refer to adjust the front and rear sprung parts. The correct four wheels positioning will do good to make sure your car to control normal and help to promote the tire life span and performance.
Why it is important to do four wheels positioning?
Four wheels positioning would be helpful to guarantee normal control of your car, promoting tire performance, the bad positioning also would result in tire face irregular wear and shorten tire life span.
When should we check the four wheel positioning?
After daily collision like potholes, or crossing track, even traffic accident or more serious condition, four wheels positioning of your car may be not well. Please check four wheels positioning under several circumstance below.
Delinte tips: we suggest that four wheels positioning should be done every 8000 - 10000 miles driving.
In order to be weared even and get max driving miles. We suggest that the position should be changed after driving about 10000 kilometers or when there is uneven wear or abnormal wear. There is arrow on the side of tire to show the rotation direction, so this factor should be considered when changing position and change according to the rotation direction of arrow.
Tire is recommended to change under following circumstances:
There are two reasons for tires wearing:
The abnormal tires pressure and the bad road condition. So we suggest you check whether the tires pressure is within normal limits periodically, and try to avoid driving on bad road. If the pattern grooves depth is under wearing limits marking height, please change another piece of tire for safety. In addition, good driving habits are vital important, so you shall reduce emergent starting and braking to the largest extent.