Belltech® 647SP - 3"-4" x 5"-6" Front and Rear Lowering Kit

1 review|Item # mpn1420858|Similar Products
$1,182.00
In Stock (6) - Ships in 24 to 48 hrs
Vehicle Specific
  • Please Select Vehicle Below
Authorized Dealer

Product Details

Front and Rear Lowering Kit with 3"-4" Front and 5"-6" Rear Body Drop (647SP) by Belltech®. Quantity: Sold as a Kit. This is a set of two hanger pieces and two shackles that combine to reposition the mounting points of both rear leaf springs higher, lowering your truck’s rear ride height. Crafted from heavy gauge reinforced steel, a durable powder coat finish effectively resists corrosion, peeling, chips and scratches. Eliminate extra space between tires and fender wells for an aggressive look, and gain a lower center of gravity that increases handling stability. Also comes with bump stops, rubber hanger eye bushings, emergency brake cable relocation bracket(s), spacers, and all hardware.

Specifications

Front Drop Height: 3.0"-4.0"
Rear Drop Height: 5.0"-6.0"

Includes

  • (2) Front Street Performance Shock Absorbers (Part Number 25003)
  • (2) Rear Street Performance Shock Absorbers (Part Number 2210FF)
  • (2) Front 2" Lowering Spindles (Part Number 2511)
  • (1) Rear Flip Kit (Part Number 6521)
  • Hardware
  • Installation Instructions

Features

  • Set of two hanger pieces and two shackles that reposition the mounting points of both rear leaf springs higher
  • Shackle eyes come with OEM quality rubber bushings already pressed in
  • Hangers, shackles, and brackets are crafted from heavy gauge, reinforced steel
  • Durable powder coat finish effectively resists corrosion, peeling, chips and scratches
  • Eliminates extra space in between tires and fenders for an aggressive look
  • Allows your truck or sport utility to fit inside a garage easier
  • Provide easier ingress and egress for passengers
  • Lower your truck’s center of gravity for sportier and more stable handling at any speed
  • Significantly reduce aerodynamic drag and increase fuel economy
  • Manufactured in the United States

Your SUV or pickup truck was designed to provide good handling with a comfortable ride. Manufacturers set vehicle ride heights as a compromise to please the majority of their customers who want a more commanding view of the road and better snow clearance. For the driver that wants to scrape the ground without being slammed in the back with a harsh ride, Belltech offers this set of replacement hangers and shackles that reposition leaf spring ends higher, lowering the truck’s rear ride height. In the kit, you’ll also get bump stops, rubber eye bushings, emergency brake cable relocation bracket(s), spacers, and all hardware.

Because Belltech believes products that do not last are not worth building, they take every effort to ensure all components will maintain their integrity over a long period of time. Reinforced, heavy-grade steel provides the strength and rigidity needed to stand up to heavy loads and large tires, and durable powder coat finish ensures steel surfaces remain protected from corrosion thanks to its high resistance to peeling, chipping, or scratching in extreme conditions. Once installed, the reduced ride height lowers your vehicle’s center of gravity which, in turn, reduces body roll and any tendencies to lean over. The result is more stable handling at any speed and reduced oversteer where high mass pushes the rear of your vehicle sideways.

Founded in 1983 in Fresno, California, Belltech® Suspensions began with a mission of filling a need that existed in the marketplace for quality lowering kits that provided full-size pickups with an aggressive stance and a ride that wasn't severely punishing. After developing state-of-the-art drop spindles, coil springs, and shackle hanger kits, word of mouth spread about the design, reliability, and smooth operation of their products - earning Belltech respect among demanding California custom builders and racers. The consistent high quality and cutting-edge functionality of their lowering kits allowed them to grow in the marketplace, and the company expanded to their current location in neighboring Sanger, CA. Belltech merged with German-based KW Suspensions in 2005, and today draws on a wealth of engineering talent that has produced joint products with automotive manufacturers such as AMG, Roush, and Viper and been involved in world-class racing series. Our website is proud to offer best values on the full lineup of Belltech quality air springs, compressors, coilover sets, lowering kits, shock absorbers, anti-sway bars, lift kits, and alignment kits which prove that lowered style and ride comfort are not mutually exclusive.

Brand:
Part Number:
647SP
UPC:
722439114867

Vehicle Fitment

Chevy
Silverado 1500 2007-2013
GMC
Sierra 1500 2007-2013

Reviews

(1)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Belltech® 647SP - 3"-4" x 5"-6" Front and Rear Lowering Kit
/5
1-1 of 1 Reviews
5 of 5
Super Nice Kit
Super nice look! Truck sits perfect! Price was very good!
Posted by Jeff (Danville, CA) / September 16, 20152008 Chevy Silverado

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
CARiD FacebookCARiD TwitterCARiD YouTube ChannelCARiD PinterestCARiD Instagram
Inspiration Gallery
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS