Cold Air Intake System by BBK Performance®. These all-new BBK Cold Air Induction Kits are designed to work on your vehicle. They are a direct fit with no modifications or any tune required. This BBK cold air kit is optimized to work with the factory computer settings. BBK's latest cold air intake kits for your auto deliver great bang for the buck performance.
- Improves airflow to your engine
- Includes a shield that isolates the air filter from engine heat, so it can take in cooler, denser, air
- Custom designed and dyno tested for maximum gains in horsepower and torque
- Includes washable and reusable conical air filter that flows up to 75% better than a factory paper air filter
- Large diameter, smoothly contoured air intake tube
- Includes high quality stainless steel clamps and molded silicon hoses
- Works with factory or aftermarket tunes; requires no other modifications
- Comes complete with everything required for installation, including detailed instructions
- Limited 1-year warranty
- Proudly made in the USA
Your stock factory air intake system is a compromise, with air intake noise reduction, cost and ease of maintenance often taking precedence over airflow, even on performance models. Paper air filters are cheap to manufacture, with very small passages that are good at trapping dirt but also restrict airflow. The factory air box is also often very small, limiting the size of the filter, and the factory air intake tube is often small in diameter, has restrictive baffles and makes awkward bends, none of which is good for optimal airflow. Replace this system with a BBK Cold Air Intake and you’ll get noticeable gains in power and performance. Every BBK system is custom designed and dyno tested to enable your engine to make the most horsepower and torque possible.
The BBK system includes a high-flow conical air filter, heat shield, and high-flow air intake tube. The conical cotton element air filter has much more surface area for up to 75% greater airflow than a factory paper air filter, without sacrificing any filtration ability. The filter is isolated from engine heat with an integral shield, which allows the filter to take in cooler, denser air. Cooler, denser air contains more oxygen, and more oxygen in your engine’s air intake charge means better combustion, resulting in greater engine output. The large diameter and smooth contours of the BBK air intake tube maximizes airflow right to the throttle body.
Best of all you can have this performance improvement quickly and easily. The BBK system is a bolt-on installation that can be accomplished with simple hand tools. It works with factory and aftermarket tunes and no other modifications to your vehicle are required. The system comes with quality hardware like stainless steel clamps, and temperature resistant molded silicon hoses, with detailed instructions that will guide you through the installation.
The BBK Cold Air Intake System is backed by a 1-year limited warranty against defects in materials or workmanship, as long as the product was installed according to BBK guidelines.144.19 360.49
BBK Performance® is the No. 1 manufacturer of EFI performance parts and accessories. For over 20 years the company has concentrated its resources on the development and manufacture of performance parts and accessories for late model electronically fuel injected vehicles. These parts include large bore, high-flow mass air meters and throttle bodies, intake manifolds, high-flow fuel rails and high-volume fuel pumps, and cold air intake kits. The company also manufactures an extensive line of high-tech headers and exhaust pipes, and state-of-the-art suspension and steering components. Along with their commitment to EFI, the company is also dedicated to designing and manufacturing the highest quality parts and accessories right here in the USA. To that end, the company operates 2 large design and manufacturing facilities in Temecula, California as well as a large distribution center located in Daytona Beach, Florida.Product Reviews (10)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.BBK® - Cold Air Intake SystemAverage Rating: 4.5 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYAll BBK Reviews(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYBBK-17492013 Chevy Corvette
| Posted by Karl | (Albuquerque, NM)
Installed the cold air intake in forty minutes. There was definitely some pickup with the test drive after the installation. Then, a week later, I added a Borla ATAK cat-back exhaust system. Now the sound is awesome and there is an improvement on gas mileage.5 people found this review helpful.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYB.A. Intake2004 Ford Mustang
| Posted by Ryan | (Goshen, OH)
This intake looked good when I put it on my 2000 Mustang GT, and I found my acceleration increased a little bit. But the biggest thing I have noticed was increase in gas mileage, and it also smoothed out the transition through power. Recommend this to anyone.8 people found this review helpful.Was this review helpful for you? YesNo(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYCorvette LS3 Cold Air Intake2011 Chevy Corvette
| Posted by Walter | (Prescott, AZ)
The photo totally does not do the product justice. It's a very good-looking aluminum inlet/intake that looks better than the plastic type. I had a Corvette model on my last one. This looks so much better and I believe it has more volume. Very good unit. Would not think twice about purchasing another.11 people found this review helpful.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYBBK Performance - Cold Air Intake System2012 Ford Mustang
| Posted by Ronald | (Franklin, NC)
I installed this unit on my 3.7 2012 Mustang in about thirty minutes. My fuel economy was increased about one mile per gallon in town and about two miles per gallon on the road. What really impressed me is the sound and the performance that this unit delivers. Most people think I have a V-8. A great system well worth the money.9 people found this review helpful.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYBBK PERFORMANCE® - Cold Air Intake System (3.8L-V6)1999 Ford Mustang
| Posted by Alex | (1382 Red Oak Drive, NJ)
Installing air intake was easy and sufficient, my vehicle has a whole new sound and rpms function way better than before. Anybody who drives a lot and wants to improve mileage, horse power and sound i encourage them to try bbk out.13 people found this review helpful.Was this review helpful for you? YesNo
Product Reviews (10)
Product Reviews (10)