Adjustable Differential Converter by Axxess®. Provides a line-level output from a speaker-level circuit, for driving extra amps for additional speakers or subwoofers, as well as a triggered remote output for extra amplifiers.
- EIA Standard wire color
- 6:1 step down with fixed Output
- Gold flashed RCAs
- 80 watt maximum input
- Separate level adjustment for each channel
- DC triggered remote output for amplifiers
- New, smaller easy to mount design
- Molded channels so zip ties will not slip
- Suitable for use as a differential converter
This device should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers. This device is most commonly installed in the trunk when a subwoofer system is being added to the OEM stereo system, providing adjustable line-level outputs to drive the secondary amplifier. In addition this device will also detect the presence of an audio signal and then generate a +12V output (verified by an illuminated LED) that can be used to turn-on an aftermarket amplifier.
Axxess Integrate, a subsidiary of mobile audio's one-stop-shopping conglomerate Metra, is at the very forefront of the mobile audio installer's field. Their cutting-edge interfaces make adding to or installing a car stereo, nav system, sat radio or auxiliary amplifier easy. With the complexity of modern vehicles, it's not a simple operation to install aftermarket electronics that will properly interface with the car's wiring, onboard computers and OEM infotainment system. Axxess has it figured out and dialed in.