Universal Harness by Auto Meter®. If you need a replacement wiring harness, need to extend an existing harness, or need to connect your Auto Meter Pit Road Speed Tach to the PIC programmer, get the ready-made harness that’s made for the job from Auto Meter. These harnesses have the correct gauge wires, wire colors, and plug and play connectors for hassle free installation and use.
- Replacement wiring harnesses replace wiring harnesses originally supplied with Auto Meter gauges
- Wiring harness extension allows components to be located further away
- Jumper harness allows Pit Road Speed Tach to be connected to PIC programmer
- Each harness has correct wire gauge, wire colors, and connectors for painless installation and trouble-free use
- Proudly made in the USA
Constructing an electrical wiring harness can be a hassle. To do the job right you need spools of the right color wires in the right wire gauge, and then you need the right connectors, some of which can be difficult or impossible to find depending on the components being wired. Auto Meter knows this, which is why they supply ready-made replacement harnesses, extension harnesses, and jumper harnesses that save you time and money with painless plug and play installation.
Replacement harnesses are identical to the original ones that come with Auto Meter gauges. If you have a damaged original harness, don’t bother with trying to repair it; install an Auto Meter replacement and get back on the road or the track.
The 20’ Full Sweep Electric Nitrous Pressure Sending Unit harness allows the mounting sender on the nitrous bottle to be located in the rear of the car. It’s a direct replacement for the 8’ harness originally supplied with Auto Meter full sweep electric nitrous pressure gauges. The network harness extension allows the Nexus system gauges to be located 3’ further away from the controller, increasing your mounting options. The PIC Jumper Wire Harness is required to connect the PIC programmer to the Pit Road Speed Tach.
Auto Meter® is the leading manufacturer of automotive instrumentation and electronics. The company manufacturers instruments for displaying everything that’s possible to measure on a vehicle, including specialized gauges, shift lights and warning lights for all types of racing, where they are the dominant brand. Founded in 1957 by electronic instrumentation pioneer Vern Westberg, today the company is a division of the Harbour Group. Besides manufacturing performance and racing instrumentation and electronics for the automotive aftermarket, Auto Meter also has an OEM division that makes instrumentation for production vehicles, a Pro-Cycle division that produces instrumentation for motorcycles, a Marine division that creates instrumentation for watercraft, and a Test Equipment division that manufactures a complete line of equipment for testing, charging and maintaining batteries, and testing the vehicle charging system. Headquartered in Sycamore, Illinois, where it has a 45,000 sq. ft. manufacturing plant, Auto Meter also has 125,000 sq. ft. of manufacturing plant space in Utah, where its OEM and Test Equipment divisions are located. The company has 500 employees, all devoted to providing the performance enthusiast and racer with the information they need.