AIRAID® - PowerAid™ Throttle Body Spacer

38 reviews|Item # sp6141|Similar Products
$109.99 - $179.99
Availability Varies - Depends on Product Options
Vehicle Specific
  • View Product Options
Authorized Dealer

Product Details

PowerAid™ Throttle Body Spacer by AIRAID®. The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it’s unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.

Features

  • Enhances fuel atomization, which improves combustion and engine efficiency
  • Increases low end torque and fuel economy
  • Easy to install, takes less than 1 hour with simple hand tools
  • CAD designed and dyno tested for each specific application
  • Manufactured from aircraft-grade 6061 T-6 aluminum
  • Comes complete with all gaskets and hardware, including comprehensive instructions
  • Backed by AIRAID's "No Hassle" warranty
  • Proudly made in the USA

There are many companies that make products to improve airflow to your engine. AIRAID is one of the few that's thought of how to improve that airflow once it gets there. The result of their research and testing is the PowerAid™ Throttle Body Spacer. The PowerAid™ Spacer is about 1-in. thick and installs between the throttle body and intake manifold. It features AIRAID's unique and patented Helix Bore, which creates a spinning action as the incoming air passes through the throttle body. The helical effect causes the air molecules to organize and maintain high velocity, all the way into the combustion chamber. Combustion is improved and engine efficiency increased. The results you experience are tremendous torque gains from 800-2500 rpm, along with gains in fuel economy.

Each PowerAid™ spacer is computer designed and dyno tested for the specific application. It's manufactured from high quality, aircraft-grade 6061 T-6 aluminum. Everything required for installation comes with your spacer, including gaskets, hardware, the necessary brackets and detailed instructions. And it can be installed in less than an hour with simple hand tools.

PowerAid™ spacers are available for vehicles with electronic throttle bodies and vehicles with throttle cables. They're also available with PowerPorts™. PowerPorts™ are specially located ports in the spacer that are drilled and tapped for instrumentation sensors or power enhancements like Nitrous Oxide.

AIRAID® was founded in 1997 when they began developing and manufacturing air intake systems for light trucks and SUVs, utilizing the cotton-gauze filter technology that was available at the time. These systems increased airflow and performance while being easy to install, and sold so well that the company soon realized that another source of filters was necessary. They believed they could produce a better quality filter using new technology and state-of-the-art materials, and so in 2002 the AIRAID Filter Company was formed. Today AIRAID is the recognized leader in air management technology. Extensive research and development has allowed AIRAID to come to market first with high quality products that improve drivability and performance.

Reviews

(38)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
AIRAID® - PowerAid™ Throttle Body Spacer
/5
1-10 of 38 Reviews
5 of 5
Just Perfect
AIRAID® - PowerAid™ Throttle Body Spacer
Received everything, it all fit well, and definitely noticed a power boost.
Posted by Cain (Deming, NM) / May 31, 20202002 Dodge Ram
Overall appearance is nice. Installation was a breeze! I literally installed it in under 10 minutes. I have a K&N cold air intake as well and that might have made things easier. Since installation, I’ve noticed about a 1.2 MPG increase so I’m sure I got a small horsepower & torque boost. I will say I think it would look better if it had an “AIRAID” emblem/sticker on the outer perimeter between the bolt holes. Also, it had some burrs at the start & end of the threads.
Posted by Tim (Smithfield, VA) / June 05, 2019
2014 3.6 Dodge Challenger. Very easy installation and small but noticeable increase in flow.
Posted by Derek (San Marcos, TX) / October 06, 20182014 Dodge Challenger
4 of 5
Great Throttle Response
I have a 2014 Ram 1500 5.7 Big horn, I don’t hear the whistle I have heard about online. My 06 Ram had the intake almost under the dash so I could hear it but with the 14 Ram throttle body is further in the engine compartment.
Posted by Jason (Tewksbury, MA) / February 13, 20182014 Dodge Ram
5 of 5
AIRAID® 300-631-1 - PowerAid™ Throttle Body Spacer
Installed the AIRAID PowerAid Throttle Body on 2013 Dodge Ram. Install took about 20 minutes from start to finish. Very easy install. The product looks and sounds great. You can hear a little winding sound at low speeds. I can feel a better throttle response and power around 2500 rpm range. I also have an AIRAID cold air Intake system and a doable tuner. Great combination. Very please with product.
Posted by Jose (Glendale, AZ) / January 06, 20182013 Dodge Ram
Great addition to my 2011 Chevy Silverado! I noticed more hp but the biggest difference was in the response from the throttle. When I press down on the accelerator I can feel a quicker punch. Very easy to install, It took me about 25 minutes. Looks good under the hood.
Posted by Harry (Fairburn, GA) / October 12, 20172011 Chevy Silverado
4 of 5
Like It, Gives Out A Nice Whistle
Quality is good, fits perfectly by my intake.
Posted by Juan (Fowler, CA) / September 14, 20172014 Dodge Charger
5 of 5
Just More Perfection
AIRAID® - Throttle Body Spacer
I've put it with K&N filter and it will give full power of the racing filter plus the noise sound great.
Posted by Omar (Abu Dhabi, AA) / January 27, 20162010 Nissan Xterra
5 of 5
Throttle Body Spacer
AIRAID® 200-586 - Throttle Body Spacer
I installed this Throttle Body Spacer on my 2002 Chevy Trailblazer. At first I was curious if it was even going to do anything. The installation was a breeze the instruction paper actually made since. After I put this product on you can hear a whistle sound, it sounds like a very small turbo. The Airaid product come to find out has made a difference. I have put it to the test with most of everything, when the light is red and it turns green you put the throttle all the way down it doesn't work. But when you have the throttle at half like going 30 mph then you put the metal to the peddle, you can feel and tell it works. Then when driving normally it does very well, the box says 4 mpg well lets get real now it does get only like 3 mpg better. The acceleration hp is all a little better.
Posted by David (Indianapolis, IN) / July 15, 20152002 Chevy Trailblazer
4 of 5
Easy Install, Great Mileage
AIRAID® - Throttle Body Spacer
With a little red in the engine bay its cool looks made my Xterra amazing.
Posted by Aarron (Glendora, CA) / April 16, 20152006 Nissan Xterra
CARiD FacebookCARiD TwitterCARiD YouTube ChannelCARiD PinterestCARiD Instagram
Inspiration Gallery
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS