- Increases airflow to the engine
- Isolates the air filter from engine heat, enabling it to take in cooler, denser air
- Increases horsepower and torque, improves performance
- CAD designed and dyno tested for each specific application
- Includes the advanced AIRAID SynthaFlow or SynthaMax air filter
- Available with or without molded polyethylene air inlet tube
- Comes complete with everything required for installation, including comprehensive instructions
- Can be installed in 30-45 minutes with simple hand tools; no drilling, cutting or fabrication required
- Backed by AIRAID's "No Hassle" warranty
- Proudly made in the USA
Increased airflow to your engine will increase horsepower and torque, but if that air is cooler and denser your engine will make even more power! Cooler, denser air contains more oxygen, and more oxygen in your engine's air intake charge means better combustion, resulting in greater engine output.
The AIRAID Cold Air Dam intake system ensures that only cooler air will reach your engine's air intake. It replaces your factory air box with a specially designed enclosure. The enclosure contains a large, free-flowing SynthaFlow or SynthaMax AIRAID filter, with a huge air inlet to increase airflow to the engine. But the magic occurs when your hood is closed, because that's when the Cold Air Dam enclosure seals against the hood and forms a large capacity airbox that shields the air filter from engine heat. The combination of large, free-flowing air filter and generous capacity, isolated airbox results in great quantities of cool, dense air funneled to your engine.
The SynthaFlow air filter is a cotton-gauze and synthetic blend that outperforms plain cotton-gauze in clean air testing. The SynthaFlow features "five layer" filtration, with 4 layers of cotton-gauze supplemented by "the last layer of defense", a layer of synthetic media that produces the cleanest air of any washable filter. The filtering media is held together by epoxy coated aluminum wire mesh, specially designed to provide the optimum balance between maximum airflow and peak filtration.
The SynthaMax filter is 100% synthetic, with an inner filter media consisting of two distinct layers of specifically designed synthetic materials that have separate performance characteristics. These layers are designed to work together to provide outstanding airflow and exceptionally high filtration. Contaminants are first captured by the outer layer of synthetic needlefelt polyester material, designed for wet and dry filtration with high airflow capacity. The inner layer of rayon/polyester captures any remaining contaminants while maintaining high airflow and low restriction. The inner filter media is supported by an inner and outer layer of wire mesh for strength and durability.
Each filter is over 99% efficient, meaning it allows more airflow while filtering out dirt particles ordinary filters let pass. You get better performance without sacrificing air filtration.
Some intake systems also include a roto-molded polyethylene intake tube, which further aids airflow to the engine. This tube is less affected by engine heat than steel or aluminum tubing.
The Cold Air Dam Intake System comes complete with everything necessary for installation, including comprehensive instructions. And it's backed by AIRAID's "No Hassle" warranty. There are no limitations or fine print here. Simply, if you're ever dissatisfied with the materials, workmanship, or performance of this air intake system, just send it back... period! You don't have to worry about a proof of purchase or a warranty card. AIRAID air intake systems are warranted for life.89.90 607.90
AIRAID® was founded in 1997 when they began developing and manufacturing air intake systems for light trucks and SUVs, utilizing the cotton-gauze filter technology that was available at the time. These systems increased airflow and performance while being easy to install, and sold so well that the company soon realized that another source of filters was necessary. They believed they could produce a better quality filter using new technology and state-of-the-art materials, and so in 2002 the AIRAID Filter Company was formed. Today AIRAID is the recognized leader in air management technology. Extensive research and development has allowed AIRAID to come to market first with high quality products that improve drivability and performance.Product Reviews (46)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Airaid® - Cold Air Dam Intake SystemAverage Rating: 4.7 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYShow Next 10 Shop Now(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2007 Dodge Magnum
| Posted by Wieslaw | (Elk, AA)
High quality product, fast and simple installation.Was this review helpful for you? YesNoShare this review:(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2008 GMC Sierra
| Posted by Matthew | (Bensalem, PA)
I bought this for my 2008 GMC Sierra. Underpowered from the factory, I was surprised with the improvement!Was this review helpful for you? YesNoShare this review:(4.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYGood Product2012 Dodge Charger
| Posted by Bryan | (Exton, PA)
Looks great under the hood. Low end torque gain is noticeable, but not much difference in MPG.Was this review helpful for you? YesNoShare this review:(4.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2002 Ford F-350
| Posted by Gary | (Fredonia, WI)
Installed this on the 2000 F-350, and it is working great. Haven't had a chance to take it on a long trip yet for gas mileage, but seems to be performing fantastic. Love the sound!1 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2010 Chrysler 300
| Posted by Hamed | (Muscat, AA)
The intake is amazing and seems very durable, and the quality is fantastic. Very easy to install, but read the whole manual first before fixing things in the car.2 people found this review helpful.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Dodge Challenger
| Posted by Douglas B | (Las Vegas, NV)
Everything came on time with all parts needed to change over my air filter system. Very easy to install, and price was good and service with agent was great.3 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Ford F-150
| Posted by Charles R. | (Paris, IL)
Putting the Airaid system on my F-150 5.0L was almost like putting a turbo charger on it. I think the 5.0L would be a good contender against Ford's 6-cylinder EcoBoost. Putting a chip in the 5.0L would really boost it, because the 5.0L in the Mustang is over 400 hp.1 people found this review helpful.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2011 Dodge Charger
| Posted by Christian | (San Diego, CA)
Bought this for my 2011 Dodge Charger SE. Wow, this product is great and sounds like a beast when on the highway. Great product again.1 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Dodge Challenger
| Posted by B | (San Diego, CA)
If you're like me, simply interested in performance gain and not so much into looks or style, this is the CAI for you. This thing does the job and sounds great doing it! I could instantly notice the difference when I turned my Challenger on. Another great benefit of this mod was the gain in MPG. In conjunction with my American Thunder exhaust, my 5.7 Hemi is getting on average 23 mpg city/highway. This will pay for itself over time, well worth the money!4 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4.3)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2011 Cadillac CTS
| Posted by Kendrick | (Columbia, SC)
I love it... I like the way AirAid made the cold air intake for my Cadillac CTS coupe to fit and appear exactly the way the factory box did, so you barely notice any change except when taking off :) Also it's only been couple of weeks since adding the device, but it seems I'm getting more gas mileage as my gas needle is barely moving like it was before installation, but a few more weeks and I'll know for sure... overall I'm glad I purchased it and completely satisfied!2 people found this review helpful.Was this review helpful for you? YesNoShare this review:
Product Reviews (46)
Product Reviews (46)