aFe® 51-12152-B - Magnum Force® Stage 2 Aluminum Black Cold Air Intake System with Pro Dry S Gray Filter

0 reviews|Item # mpn635289|Similar Products
$429.00
In Stock (20) - Ships in 3 to 5 days
Vehicle Specific
  • Please Select Vehicle Below
Authorized Dealer

Product Details

Magnum Force® Stage 2 Aluminum Black Cold Air Intake System with Pro Dry S Filter (51-12152-B) by aFe®. The aFe Stage 2 Cold Air Intake System replaces your entire factory air intake system with a large high-flow aFe air filter, open element airbox/heat shield and a smoothly contoured, less restrictive intake tube. This system enables your engine to take in huge quantities of dense, cool, oxygen laden air. The result is better combustion, increased horsepower and torque, and a noticeable gain in performance.

Specifications

HP Gain: Up to 13 hp
TQ Gain: Up to 17 lbs./ft.
Series: Magnum Force®
Filter Color: Gray
Tube Finish: Black
System Type: Cold Air Intakes
Material: Aluminum
Replacement Filter: Pro Dry S # 21-91071
Airflow Rating: Up to 37%

Includes

  • Air Filter
  • Powdercoat Heat Shield
  • Wrinkle Powdercoat 1-Piece Tube

Features

  • A lightweight high-gloss twill weave carbon fiber tube directs filtered air from the air filter to the engine and eliminates the factory sound chamber. It's computer designed and tested to increase air flow, while also reducing weight and enhancing the visual appearance of the engine bay. It features a billet aluminum fitting for the OE vent hose and a built-in resonance chamber to reduce unwanted air intake noise without eliminating its deep tone.
  • The included massive air filter is surrounded by a lightweight 5052-H32 aluminum, black powder-coated heat shield that helps reduce the intake of hot air from the engine compartment for maximum performance.
  • Stainless-steel T-bolt clamps are included for strength, and a premium bellows coupling allows for ample flexibility. This system is designed with fewer parts and utilizes factory mounting locations, making it extremely simple to install.

The Stage 2 Cold Air Intake System will give you the greatest possible performance gain and the most bang for the buck. It replaces your factory, restrictive air intake system with the massive aFe performance air filter of your choice, a one-piece open element airbox/heat shield that seals against the hood, isolating the filter from engine heat, and a rotomolded plastic intake tube with smooth bends for increased airflow volume. The increased flow of cooler air to your engine will result in noticeable gains in power and performance. Cooler, denser air contains more oxygen, and more oxygen in your engine's air intake charge means better combustion, resulting in greater engine output.

The aFe Pro 5R air filter was designed to provide the maximum airflow possible, to enable your engine to make the most horsepower and torque. But aFe didn't achieve this by ignoring engine protection. The Pro 5R outperforms most other cotton gauze air filters with a 98.6% efficiency rating. The increased airflow and high filtration capability are the result of the Pro 5R's construction. It’s made of 5 layers of progressively finer medical-grade cotton gauze.

The Pro GUARD 7 air filter delivers increased airflow while providing the highest level of filtration efficiency available – 99.7%. The patented 7-layer progressive cotton/synthetic media in the Pro GUARD 7 consists of 5 layers of progressively finer medical grade cotton gauze, combined with 2 layers of non-woven synthetic polyester fabric with random porosity.

Competitors use constant size mesh gauze in their filters, which creates voids/openings that can allow dirt to pass through. As the progressively finer layers of gauze are stacked in the Pro 5R and Pro GUARD 7, the randomness of the openings increase, minimizing spaces with no filter media. Dust accumulates on multiple layers, increasing overall dust holding capacity and filtration efficiency.

The Pro DRY S filter combines high airflow and filtration efficiency with the convenience of oil-free maintenance. It contains 3 layers of randomly porous synthetic fabric, which allows approximately twice the airflow when compared to a typical stock air filter. The increased airflow results in more horsepower and torque, better throttle response and more miles per gallon. But this improved airflow and performance hasn't been gained at the expense of engine protection. The Pro DRY S has an excellent 99.2% filtration efficiency rating.

The pleats in all 3 filters are evenly spaced for greater dust holding capacity and the tips are rounded for better airflow. They're also 30% deeper than comparable aftermarket air filters for longer service intervals and greater dust holding capacity. The sealing surface and supporting structures are made from 100% polyurethane, to withstand extreme engine temperatures.

Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation.

A specially developed 3-angle velocity stack smoothes the airflow transition from the air filter to the rotomolded intake tube. The precision design and smooth contours of the intake tube maximize airflow volume and speed for optimum power gains.

The aFe Stage 2 Air Intake System comes complete with everything necessary for installation, including comprehensive instructions. It's backed by aFe's limited 2-year warranty and made in the USA.

aFe® (Advanced Flow Engineering, Inc.) manufactures performance products for late model cars, light trucks and SUVs. The company was founded in 1999 with an initial concentration on high performance air filters. Since then, the company product line has broadened to include cold air intakes, fluid filters, exhaust systems, intake manifolds, intercoolers, programmers, differential covers, transmission pans and throttle body spacers. The team of engineers, machinists, production and sales people at aFe® have many years of experience in their respective positions, and together work to ensure they produce the best automotive products on the market.

Brand:
Part Number:
51-12152-B
UPC:
802959512883
Alternate MPN:
5112152B

Vehicle Fitment

Chrysler
300 2011-2022
Dodge
Challenger 2011-2022
Charger 2011-2017, 2022

Reviews

(0)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
aFe® 51-12152-B - Magnum Force® Stage 2 Aluminum Black Cold Air Intake System with Pro Dry S Gray Filter
/0

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
CARiD FacebookCARiD TwitterCARiD YouTube ChannelCARiD PinterestCARiD Instagram
Inspiration Gallery
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS