Jeep Wrangler 2007-2014, 2.5" - 3.5" Suspension Lift Kit, Incl. Shocks/Coil Springs/Rear Track Bar Bracket/Rear Bump Stop Bracket/Rear Track Bar Brace/Hardware Kit (18415.50) by Rugged Ridge®. Designed by a dedicated team of Jeep enthusiasts, this lift kit is designed to provide great off-road performance without sacrificing on-road ride. It's packed with features that lesser kits leave out, like powder coated, E-coated 5160H hot rolled bar 5/8" coil springs that won't sag and deliver the best ride, and nitrogen gas charged shocks with internal valving that automatically adjusts the ride quality. It include coil springs, a rear track bar bracket, rear track bar brace, rear bump stop bracket, and hardware.
Fitment Notes: Due to vehicle weight, the 2-Door models may receive an additional 1" lift over 4-Door models.
- Improves off-road performance while preserving factory-like on-road ride
- Designed for up to 34" x 12.5" x 17" tires and moderate off-road use
- Coil springs made of 5160H hot rolled bar to keep their memory and eliminate possibility of sag
- Coil springs are powder coated, E-coated 5/8" coil for long life and strength
- Coil springs are set to original factory rates for better ride
- Shocks are nitrogen gas charged and feature automatically adjusting internal valving for a smooth ride
- Rear track bar brace to strengthen original track bar mount
- Includes detailed instructions
- Backed by a limited lifetime warranty
This kit has been designed and thoroughly tested to provide the best off-road performance while maintaining as close to a factory ride as possible. The 2.5"/3.5" lift kit will provide an average of 2.5" lift on a 4-door and up to 3.5" lift on a 2-door. The actual lift is dependent on specific Jeep characteristics and additional parts on the vehicle (bumpers, winch, hard tops, soft tops, etc.). The 2.5"/3.5" lift kit is intended for moderate off-road use and up to 34" x 12.5" x 17" tires. It includes top quality coil springs, a rear track bar bracket, rear track bar brace, rear bump stop bracket, and hardware.
The most important part of any lift kit is the springs. Rugged Ridge starts with the highest quality 5160H hot rolled bar, which is formed into 5/8" coil springs that are set to original factory rates. By using 5160H hot rolled bar, these springs will keep their memory, eliminating any possibility of future sag. And by setting the springs to factory rates, you get the best on-road ride possible and the ability to use a larger tire. As a final touch, each spring is powder coated and E-coated for maximum durability and long term resistance to corrosion.
The kit includes a rear track bar brace to strengthen the original track bar mount, a must for off-road performance and a Rugged Ridge exclusive.
The ORV shocks are nitrogen gas charged to 150 psi for a better on and off-road ride. The internal valving features an orifice that rotates when the shock piston moves more than 2", automatically adjusting the ride quality. The bonded iron 14mm piston is micro-polished and double-chrome plated for durability. The piston and sealing rings are Teflon coated for high wear resistance. Twin tube construction allows the shock to run cooler while protecting the internals from off-road obstacles. The shocks are mounted with durable polyurethane bushings and each shock includes a black shock boot.
The Rugged Ridge 2.5"/3.5" lift kit includes detailed instructions and is backed by a limited lifetime warranty.508.20Brand: Rugged Ridge Part Number: 18415.50 UPC: 804314165703
Rugged Ridge® is a division of Omix-Ada, the leader in Jeep replacement parts. Based in Suwanee, Georgia, Rugged Ridge was begun almost two decades ago when the enthusiasts at Omix-Ada decided that even a vehicle as tough as a Jeep could be improved upon. Since then, Rugged Ridge has created over 500 accessories to improve your Jeep’s performance, utility and appearance. Unlike parts made for ordinary vehicles, Rugged Ridge knows that every part made for a Jeep must uphold the Jeep tradition of strength and capability, so every part is designed, tested, manufactured and tested again to make sure it’s perfected. Then and only then can it be installed on your Jeep.
Product Reviews (0)
Product Reviews (0)