Toyota Tacoma with Track System 2011, Roll-X Rolling Tonneau Cover by BAK®. Proudly made in the USA, this solid all-season tonneau cover performs as impressively as it looks. With a frame constructed from high-grade aluminum, this roll-up cover secures and protects your truck bed from rain, snow, mud, and prying eyes. The Roll-X ensures full access to the entire truck bed and stake pockets.
- Combines strength of a hard cover with the flexibility of a roll-up cover
- Full access to the truck bed as well as to every stake pocket
- Solid aluminum construction
- Water resistant finish
- Nearly invisible profile
- Heavy-duty locks for complete security
- Drive with the cover open, fully or partially closed
- Load capacity up to 400 lb
- Easy, no-drill installation
- Backed by a 1-year warranty
- Made in the USA
The Roll-X is the most significant advancement in a tonneau cover design since the introduction of the famous BakFlip that led the market for years. Much like the BakFlip, the Roll-X unites the best of two worlds: convenience of a soft rolling cover with the advantages of an impact-resistant hard tonneau cover. The secure, self-locking automatic rail system ensures the entire cover is completely locked down on both sides from the cab all the way to the tailgate. The Roll-X’s unobtrusive, 1/4-inch low profile makes it almost invisible and its design allows additional accessories such as bed rails, bed extenders, tie downs, and more to be used easily. Should you wish to access your bed area or drive with it exposed, the cover rolls up easily in seconds. And unlike soft covers, the Roll-X won’t shake, bang or vibrate at speed. The virtually indestructible TUFF-BAK vinyl finish has a hair cell texture that’s resistant to scratches, dents and wear as well as harmful UV. The Roll-X is also one of the strongest truck bed covers on the market. A frame constructed of high-grade aluminum makes the Roll-X one of the strongest and lightest tonneau covers on the market – it weighs only 55 pounds but can hold up to 400 pounds of equally distributed weight. The Roll-X installs easily with a 15 mm wrench in 15 minutes, and all fittings and instructions necessary for installation are included.849.00
Brand: BAK Part Numbers:
BAK Industries is the leading manufacturer of innovative tonneau covers for pickup trucks. We go to great lengths to produce covers that are not ordinary. We take all factors into consideration, from contemporary designs, to strength and security. We are committed to producing solutions that meet the demands of the most discerning customers. No matter how you use your truck, BAK Industries makes a cover to suit your lifestyle. BAK tonneau covers have met with such success in the aftermarket that Ford now offers custom versions of the BAKFlip tonneau cover as a Ford OEM option.Product Reviews (2)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.BAK® - Roll-X Rolling Tonneau CoverAverage Rating: 3.5 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYAll BAK Reviews(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2005 Toyota Tacoma
| Posted by Heather | (Powell, TN)
Although I've only had the product for a week, the cover looks great on the truck and functions as expected. I'm sad to see the ability to use the factory bed rails gone (that's what the cover attaches to), but in the end the utilization of the cover outweighs the bed rails for me. I love the fact that it doesn't take up any bed space and you still have full utilization of the bed. I bought a Pop and Lock tailgate lock so that I can lock the contents in the bed as my original tailgate did not have a lock on it (recommend the codeable lock so that you can use your truck key). The installation went okay, but I expected perfect instructions and hardware for products "Made in USA". Couple of things about my installation (again, a 08 Tacoma Access Cab). 1) the contents page was incorrect, you actually need / have 4 of each of the mounting hardware (not 2 as the instructions suggest); 2) I had to fashion 2 washers to go behind the 6 mounting bolts (12 total) in order for the rails to be secure (otherwise there was approximately 1/8" play after I fully tightened the mounting bolt); 3) There was absolutely no instructions on how to install the straps or what to do with the wingnuts. Personally, I think the back strap (which was pre-installed) did better on the front bolt to provide a more secure strap for the cover. Overall, I'm happy with the product, I knew that I would lose the bed rails and had to buy the tailgate lock. However, I was disappointed with the missing hardware and poor instructions. It took me approximately 2.25 hours to install (hour of which was making the washers work with the mounting bolts). Should have only taken 45 minutes with proper hardware and instructions.Was this review helpful for you? YesNoShare this review:(3)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2014 Toyota Tacoma
| Posted by Mark | (Havelock, NC)
The cover looks fine but what doesn't just sitting there. The cover rolls open and shut fine. The instructions are pathetic and extremely vague. The forward notch on the passenger side rail was too wide and the lock washer would slip through causing the rail to rise when being tightened. The cover should be longer by about two inches to offer good water resistance. The metal tabs on the rear end of the rails are only slightly harder than cold butter. One of them was bent in the box. So what is the second, thinner weather strip for? Don't know it was never identified in the instructions. The locking and unlocking mechanism is plastic?! Seriously?! The locking mechanism and all rail parts should be made from steel. A few more pounds does not matter on a truck. Would I recommend this to anyone? We will have to wait and see. So far I am not impressed with the quality control and the quality of parts.Was this review helpful for you? YesNoShare this review:
Product Reviews (2)
Product Reviews (2)
You will never pay more with CARiD! Not only will we match prices from any competitor's website or other reputable source, we will continue to honor that promise for up to one year after your purchase.
We'll match the price at time of purchase, or refund you the difference if done after the purchase. Either way, we are totally committed to providing you the best online shopping experience.
We're car and truck enthusiasts, just like you! And it's enthusiasts we hire in our Sales and Service Centers. Many of our staff are ASE certified and have spent years in the retail auto business.
We conduct our own in-house training, and we even bring vendors to us for hands-on product training demonstrations. You're getting true expertise when you phone or email us!
With hundreds of vendors, and tens of thousands of components for sale, we put tremendous effort into coordinating our data with our vendors' data in order to guarantee that you get the correct part.
Our huge database is regularly cross-checked to keep it current and optimized. At times, our thoroughness makes our data even more accurate than our suppliers! This rigorous process means that you can always order with confidence.