2011 Cadillac STS Trunks & Tailgates
- Tuff Support®Trunk Lid Lift SupportCadillac STS 2011, Trunk Lid Lift Support by Tuff Support®. 1 Piece. The bodies of Tuff Support's are made of high quality seamless tubes, treated with phosphate before painting to increase protection against corrosion, and help the...Rod diameters are checked with lasers for imperfections and diameter fluctuations to meet OEM specsRods are heat treated and nitrated for hardening and resistance to corrosion$11.43
- StrongArm®Trunk Lid Lift SupportCadillac STS 2011, Trunk Lid Lift Support by StrongArm®. Body Connection: Ball Socket (Nylon) 8 mm. Shaft Connection: Ball Socket (Nylon) 10 mm. Compressed Length: 8.31". Extended Length: 12.56". Travel Length: 4.25". Capacity: 72 Lbs....Engineered and Built to Meet or Exceed Original Equipment Quality Standards for Long Lasting PerformanceEasy To Install In Just Minutes$29.10
- WVE®Trunk Lid Release RelayCadillac STS 2011, Trunk Lid Release Relay by WVE®. Finish: Gray. Amperage: 20 Amp. Connector Type: 4 Terminals. Size: 15mm x 22mm. Shape: Rectangular. Replace your worn-out or faulty component with this quality replacement from WVE....Excellent replacement for your worn-out factory partDesigned to keep your vehicle running reliably mile after mile$7.53
- WVE®Trunk Lid Release Actuator Solenoid ConnectorCadillac STS 2011, Trunk Lid Release Actuator Solenoid Connector by WVE®. Finish: Beige. Replace your worn-out or faulty component with this quality replacement from WVE. This product is designed and tested to ensure the ultimate in...Excellent replacement for your worn-out factory partDesigned to keep your vehicle running reliably mile after mile$37.93
- Vicrez®Auto Body Plastic Repair Complete SetUniversal Auto Body Plastic Repair Complete Set by Vicrez®. The Vicrez Auto Body Plastic Repair Complete Set comes with needed to start working on your project right away. Vicrez packages its industrial/commercial products for purchase...Industry-standard Dispenser for Dual-Barrel cartridgesKit Includes an integrated dual-ratio plunger, usable for both 1:1 and 2:1 ratio cartridges$66.76 - $178.84Save: 10%$60.08 - $160.96
- Vicrez®Auto Body Plastic Repair KitUniversal Auto Body Plastic Repair Kit by Vicrez®. Auto Body Plastic Bumper Repair kit is auto body industry standard, two-component adhesive that cures in about 120 seconds. You can use this adhesive/ filler to repair any automotive...Made in USAHelps to elevate your vehicle above the masses$22.63 - $95.97Save: 10%$20.37 - $86.37
- Vicrez®Dual Cartridge Static Mixing NozzleUniversal Dual Cartridge Static Mixing Nozzle by Vicrez®. Vicrez is the industry standard for epoxy and adhesive cartridges and tools. And specifically, cartridges from Vicrez, Loctite, Araldite, Devcon, and 3M, and many others. This...Perfect for consistently applying Epoxy and Adhesives for any applicationIndustry-standard Dispenser for Dual-Barrel cartridges$20.26 - $41.72Save: 10%$18.23 - $37.55
- Vicrez®Dual Epoxy/Caulking Cartridge Dispensing GunUniversal Dual Epoxy/Caulking Cartridge Dispensing Gun by Vicrez®. Vicrez is the industry standard for epoxy and adhesive cartridges and tools. The Vicrez Dual Epoxy/ Caulking Cartridge Dispensing Gun works with all standard...Industry-standard Dispenser for Dual-Barrel cartridgesKit Includes an integrated dual-ratio plunger, usable for both 1:1 and 2:1 ratio cartridges$47.67 - $101.34Save: 10%$42.91 - $91.20
- Platinum Driveline®Stabilus™ Trunk Lid Lift SupportCadillac STS 2011, Stabilus™ Trunk Lid Lift Support by Platinum Driveline®. Body Connection: Plastic Socket. Shaft Connection: Plastic Socket. Compressed Length: 7.99". Extended Length: 12.56". Travel Length: 4.57". Capacity: 65 Lbs....Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle$22.55
- ACDelco®Trunk Lid Release SwitchCadillac STS Base AWD 2011, Trunk Lid Release Switch by ACDelco®. Rectangular. ACDelco Trunk Lid Release Switch designed utilizing the latest technology. They are designed to comply with OE standards and provide the factory look and...Manufactured on an exclusive production line by specially trained personnelExpertly made from premium materials$38.19Save: $5.73 (15%)$32.46
- RhinoPac®StrongArm™ Trunk Lid Lift SupportCadillac STS 2011, StrongArm™ Trunk Lid Lift Support by RhinoPac®. 1 Piece. Body Connection: Ball Socket (Nylon) 8 mm. Shaft Connection: Ball Socket (Nylon) 10 mm. Compressed Length: 8.31". Extended Length: 12.56". Travel Length:...Gas charged lift supportsHeavy gauge steel body$23.35
- ReplacementTrunk Lid Lift SupportCadillac STS Base / Platinum 2011, Trunk Lid Lift Support by Replacement. (Standard Line). Body Connection: Ball Socket. Shaft Connection: Ball Socket. Compressed Length: 8.31". Extended Length: 12.56". Travel Length: 4.25". This product...Expertly crafted from premium materialsDesigned to match rigorous quality standards$3.94 - $7.88
- Atlas Lift®Driver and Passenger Side Trunk Lid Lift Support SetCadillac STS 2011, Driver and Passenger Side Trunk Lid Lift Support Set by Atlas Lift®. 1 Pair. Body Connection: Ball Socket (Nylon). Shaft Connection: Ball Socket (Nylon). Compressed Length: 7.8". Extended Length: 12.6". Travel Length:...Designed to deliver trouble-free, consistent performanceManufactured from high-strength materials to last$14.42
- Atlas Lift®Trunk Lid Lift SupportCadillac STS 2011, Trunk Lid Lift Support by Atlas Lift®. Body Connection: Ball Socket (Nylon). Shaft Connection: Ball Socket (Nylon). Compressed Length: 7.8". Extended Length: 12.6". Travel Length: 4.8". Atlas offers lift supports for...Designed to deliver trouble-free, consistent performanceManufactured from high-strength materials to last$8.74
- First Equipment Quality®Trunk Lid Lift SupportCadillac STS 2011, Trunk Lid Lift Support by First Equipment Quality®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you...OE quality parts from top original equipment and aftermarket manufacturersThe finest quality at a great price$14.82
- TruParts®Trunk Lid Lift SupportCadillac STS 2011, Trunk Lid Lift Support by TruParts®. 1 Piece. This premium trunk lid lift support is in a league of its own when it comes to quality replacement of a damaged or cracked component. The reliable TruParts trunk lid lift...Designed to meet OE standards of quality and performanceMade from the finest materials for long-lasting service$22.36
- WVE®Trunk Lid & Hatch Release Switch ConnectorCadillac STS 2011, Trunk Lid & Hatch Release Switch Connector by WVE®. Finish: White. Replace your worn-out or faulty component with this quality replacement from WVE. This product is designed and tested to ensure the ultimate in...Excellent replacement for your worn-out factory partDesigned to keep your vehicle running reliably mile after mile$35.02
- WVE®Trunk Lid Release SwitchCadillac STS 2011, Trunk Lid Release Switch by WVE®. Material: Plastic. Externally Mounted. Connector Type: Female Connector. Terminals Type: 2 Blade Male Terminals. Replace your worn-out or faulty component with this quality...Excellent replacement for your worn-out factory partDesigned to keep your vehicle running reliably mile after mile$41.85
- APR Performance®Carbon Fiber Side PlateUniversal Side Plate by APR Performance®. Dress-up the engine bay with carbon fiber, molded to precise dimensions that only pre-preg. materials can achieve. These parts are exotic-looking, race-inspired, and are unmatched in quality.Pre-preg. Carbon fiber manufacturing process: engine covers are vacuum-bagged and cured in the autoclave at high temperatures, ensuring quality, durability, and extremely-high strengh-to-weight ratiosFade-resistant clear coat: engine covers are finished with UV-stable, production clear coat paint, then individually hand-polished to a brilliant shine$63.45 - $180.75
- APR Performance®Carbon Fiber SheetUniversal Sheet by APR Performance®. Dress-up the engine bay with carbon fiber, molded to precise dimensions that only pre-preg. materials can achieve. These parts are exotic-looking, race-inspired, and are unmatched in quality.Pre-preg. Carbon fiber manufacturing process: engine covers are vacuum-bagged and cured in the autoclave at high temperatures, ensuring quality, durability, and extremely-high strengh-to-weight ratiosFade-resistant clear coat: engine covers are finished with UV-stable, production clear coat paint, then individually hand-polished to a brilliant shine$355.00 - $734.95
Shop By Service Type
2011 Cadillac STS Models
Popular Searches