Jeep Wrangler 2007-2011, MXP Series Cold Air Intake System with Intake Tube by AIRAID®. The MXP Series air intake system positions a large 360º AIRAID air filter with a huge air inlet in the stock location, but encloses it in a roto-molded polyethylene airbox that seals against the hood, forming an enclosure. The airbox features massive air inlets that are positioned to allow only the coolest outside air inside the box. This enables the air filter to channel large quantities of cool, dense air to the engine, resulting in more horsepower and torque, and improved performance.
- Increases airflow to the engine
- Molded airbox isolates the air filter from engine heat, has strategically placed air inlets to allow only the coolest air into the box
- Increases horsepower and torque, improves performance
- CAD designed and dyno tested for each specific application
- Includes the advanced AIRAID SynthaFlow or SynthaMax air filter
- Available with or without molded polyethylene air inlet tube
- Comes complete with everything required for installation, including comprehensive instructions
- Can be installed with simple hand tools; no drilling, cutting or fabrication required
- Backed by AIRAID's "No Hassle" warranty
- Proudly made in the USA
Increased airflow to your engine will increase horsepower and torque, but if that air is cooler and denser your engine will make even more power! Cooler, denser air contains more oxygen, and more oxygen in your engine's air intake charge means better combustion, resulting in greater engine output.
The MXP Series takes the Cold Air Dam Intake System to the next level. The molded polyethylene MXP airbox seals against the hood and forms a complete enclosure for the SynthaFlow or SynthaMax air filter. The airbox air inlets are located to allow only the coolest outside air into the airbox. This results in massive quantities of only the coolest air reaching your engine.
The SynthaFlow air filter is a cotton-gauze and synthetic blend that outperforms plain cotton-gauze in clean air testing. The SynthaFlow features "five layer" filtration, with 4 layers of cotton-gauze supplemented by "the last layer of defense", a layer of synthetic media that produces the cleanest air of any washable filter. The filtering media is held together by epoxy coated aluminum wire mesh, specially designed to provide the optimum balance between maximum airflow and peak filtration.
The SynthaMax filter is 100% synthetic, with an inner filter media consisting of two distinct layers of specifically designed synthetic materials that have separate performance characteristics. These layers are designed to work together to provide outstanding airflow and exceptionally high filtration. Contaminants are first captured by the outer layer of synthetic needlefelt polyester material, designed for wet and dry filtration with high airflow capacity. The inner layer of rayon/polyester captures any remaining contaminants while maintaining high airflow and low restriction. The inner filter media is supported by an inner and outer layer of wire mesh for strength and durability.
Each filter is over 99% efficient, meaning it allows more airflow while filtering out dirt particles ordinary filters let pass. You get better performance without sacrificing air filtration.
Some intake systems also include a roto-molded polyethylene intake tube, which further aids airflow to the engine. This tube is less affected by engine heat than steel or aluminum tubing.
The MXP Series Cold Air Dam Intake System comes complete with everything necessary for installation, including comprehensive instructions. And it's backed by AIRAID's "No Hassle" warranty. There are no limitations or fine print here. Simply, if you're ever dissatisfied with the materials, workmanship, or performance of this air intake system, just send it back... period! You don't have to worry about a proof of purchase or a warranty card. AIRAID air intake systems are warranted for life.299.90 307.90
Brand: Airaid Part Numbers:
AIRAID® was founded in 1997 when they began developing and manufacturing air intake systems for light trucks and SUVs, utilizing the cotton-gauze filter technology that was available at the time. These systems increased airflow and performance while being easy to install, and sold so well that the company soon realized that another source of filters was necessary. They believed they could produce a better quality filter using new technology and state-of-the-art materials, and so in 2002 the AIRAID Filter Company was formed. Today AIRAID is the recognized leader in air management technology. Extensive research and development has allowed AIRAID to come to market first with high quality products that improve drivability and performance.AIRAID® - MXP Series Cold Air Intake System with Intake Tube Reviews (10)Customers' rating: 4.5 OF 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYEasy Bolt-On Performance| Posted by Sean H. | 2011 Jeep Wrangler (Stevensville, MT)
I replaced another aftermarket intake system with this one. My Jeep sounds better, and I have noticed marked increase in fuel economy on average (20.5MPG up from 17.2MPG) when I drive nicely. Naturally, if your foot gets heavy, you won't see mileage increases with this installation. Installation took me about 25 minutes. It's very cut-and-dry, with few tools required. Annoying is that the tools that are required are hex keys. Not a big deal, but some people won't have them lying around.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYI Like It| Posted by Jarret D. | 2013 Jeep Wrangler (Indianapolis, IN)
I installed this with a Borla cat back exhaust on a 2012 Jeep Wrangler JK Rubicon. It made the exhaust note louder, that's for sure. I'm not sure if I really feel any more power or torque, it might just be the exhaust note that makes it feel more powerful. I am really looking for increase MPGs and I have noticed a difference there. As far as installation goes, it wasn't that difficult because it is just an intake system, however every bolt, or nut, or screw is a different size or type. I can't understand why they couldn't make all the hex bolts or torque screws the same size when they served similar purpose. There is a lot more to it then the YouTube video from AirAid. Having to use a hacksaw was not ideal either. I left the air filter cover off and stored it for someday when I'm in the mud or in deep water. Using only the stock "cold air" snorkel seemed that it would create a bottleneck and restrict the airflow to the same as it was with the stock intake. All in all, I'm glad I made the purchase and would do it again.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYPretty Simple Install| Posted by William C. | 2006 Jeep Wrangler (Kinnelon, NJ)
Very easy to install. Just the bracket attachment to the valve cover, instruction detail could have been better...fits my 2006 Wrangler perfectly.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY
AIRAID® - MXP Series Cold Air Intake System with Intake Tube Reviews (10)All Airaid Air Intakes reviews >>