2010 Ford Fusion Air Intake Parts

Change Vehicle
1 - 60 of 435 results
show:
sort by:
    • (0 reviews)
      # 86095879
      Ford Fusion 2010, Professional™ Air Filter by ACDelco®. Designed utilizing the latest technology, this Professional Air Filter by ACDelco features premium quality and will perform better than advertised. Perfect for your vehicle...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $10.62 - $15.67
    • (0 reviews)
      # 78095996
      Ford Fusion 2010, Air Filter by Bosch®. Dirty air filters can cause decreased fuel mileage, increased engine wear, and even problems starting the engine. Check your engine air filter at every oil change and always replace a dirty...
      Protects Your Engine by Stopping 98% of Engine-Threatening ParticlesPrevention of Unfiltered Air Entering Engine Intake with a High-Quality Seal
      $8.60 - $17.36
    • (0 reviews)
      # 83766604
      Ford Fusion 2010, Extra Guard™ Flexible Panel Air Filter by FRAM®. Most dirt and dust enters the engine through the air filter and FRAM Extra Guard is engineered to provide twice the air filtration compared to an original filter....
      Provides better air filtration for improved performancePrevents damaging particles from entering your engine
      $8.74 - $9.64
    • (0 reviews)
      # 85811729
      Ford Fusion 2010, Air Filter, FTF Air Filter by Denso®. The air filter is the last line of defense against the harmful airborne abrasives that have been proven to wear out engines before their time. With OE-quality engineering and...
      High airflow rate improves performance and fuel economySuperior dust holding capacity increases filter life
      $8.46 - $9.34
    • (0 reviews)
      # 21484032
      Ford Fusion 2010, Air Filter by Hastings®. Clean air is critical to the performance of your engine, so don’t trust just any filter. Hastings filters are tested according to SAE J726 test procedures, where they meet or exceed the...
      Filters out dirt and dust in the air preventing them from entering the engineHeavy duty construction for long service life
      $13.33 - $14.36
    • (0 reviews)
      # 53999170
      Ford Fusion Gas 2010, Air Filter by Interfil®. If you have a dirty air filter, clogged PCV valve, or defective MAF sensor you may be tempted to just run down to the local auto parts chain store for a replacement, but before you...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $12.20 - $15.50
    • (0 reviews)
      # 23884200
      Ford Fusion 2010, Air Filter by Motorcraft®. The air filter is a simple yet crucial part of your vehicle that keeps dust and road debris out of the engine. If the air filter is clogged up and starts to choke off the airflow to your...
      Direct OEM replacement for proper fitRecommended by Ford Motor Company
      $15.73
    • (0 reviews)
      # 84192475
      Ford Fusion 3.5L 2010, Air Filter by NPN®. If you have a dirty air filter, clogged PCV valve, or defective MAF sensor you may be tempted to just run down to the local auto parts chain store for a replacement, but before you waste...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $9.98
    • (0 reviews)
      # 64418858
      Ford Fusion 2010, Air Filter Panel by WIX®. Inner Diameter Top: Closed. Style: Air Filter Panel. Considering as much as 10,000 gallons of air must pass through the air filter for every gallon of fuel the engine consumes, WIX air...
      Prevents foreign particles like carbon, soot and abrasives from entering the fuel mixEnsures superior engine protection
      $13.38 - $13.73
    • (0 reviews)
      # 25578833
      Ford Fusion 2010, Mass Air Flow Sensor by Dorman®. Save time, money, and labor by replacing only the MAF sensor instead of the entire mass air flow assembly. Constructed with the latest design improvements and to precisely match OE...
      Constructed from high-quality materials to successfully resist damage from extreme underhood temperatures and environmental factors, such as humidityDirect fit for a trouble-free replacement
      $70.31
    • (0 reviews)
      # 35567470
      Ford Fusion 2010, Mass Air Flow Sensor by Cardone®. Without Housing. With Instruction Sheet. Mounting Holes: 2. Mounting Type: Bolt-On. MAF Sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate...
      50-state emissions street legalThe finest quality at a great price
      $55.74 - $114.65
    • (0 reviews)
      # 24558218
      Ford Fusion 2010, Mass Air Flow Sensor by Delphi®. When it comes to MAF sensors, communication with the ECM is key. That’s why Delphi MAF sensors use all new parts - never remanufactured parts that could harbor debris and...
      Extensive coverageAvailable in a variety of bore diameters to accommodate a wide range of airflow, resulting in a robust design for electrical overloads
      $92.40
    • (0 reviews)
      # 87856959
      Ford Fusion 2010, Mass Air Flow Sensor by Hitachi®. Grade Actual OE Part. If you have a dirty air filter, clogged PCV valve, or defective MAF sensor you may be tempted to just run down to the local auto parts chain store for a...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $60.26
    • (0 reviews)
      # 23873391
      Ford Fusion 3.0L / 3.5L 2010, Mass Air Flow Sensor by Motorcraft®. If you're looking for the most suitable replacement for a defective mass air flow sensor, Motorcraft is the way to go. It is the only MAF sensor recommended by Ford...
      Direct OEM replacement for proper fitBuilt to strict Ford Motor Company specifications
      $123.88
    • (0 reviews)
      # 25579919
      Ford Fusion 2.5L / 3.0L 2010, Fuel Injection Throttle Body by Dorman®. Manufactured specifically for horsepower and airflow increase with the idea to provide vehicles owners with the improved driving experience and unmatched...
      Produced specifically to improve horsepower and increase airflowManufactured from sturdy materials
      $91.29
    • (0 reviews)
      # 35567503
      Ford Fusion 2010, Remanufactured Fuel Injection Throttle Body by A1 Cardone®. Domestic. With Throttle Position Sensor, Instruction Sheet. Gasket No Required. Housing Material: Aluminum. Housing Finish: Gray/Unfinished. Actuation...
      50-state emissions street legalThe finest quality at a great price
      $92.73 - $109.18
    • (0 reviews)
      # 88046771
      Ford Fusion 152 CID 2010, Throttle Body by Genuine®. Is your vehicle hard to start? Does its stumble and stall, and idle rough? Are you making more frequent visits to the pump? Your fuel system may need repair, but before you waste...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $201.73
    • (0 reviews)
      # 45185542
      Ford Fusion 2010, TechSmart™ Fuel Injection Throttle Body Assembly by Standard®. SMP’s vision is to be the leading independent supplier to the automotive aftermarket, providing the highest quality products, competitive prices...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $101.03 - $151.06
    • (0 reviews)
      # 72012833
      Ford Fusion 2010, Manifold Absolute Pressure Sensor by Motorcraft®. Keep your vehicle's emission control system functioning properly with this quality product. Manufactured for your specific vehicle, the part meets strict Ford...
      Designed for specific Ford, Mercury, and Lincoln vehiclesBuilt to strict Ford Motor Company specifications
      $46.80 - $68.64
    • (0 reviews)
      # 64730961
      Ford Fusion 2010, Manifold Absolute Pressure Sensor by Standard®. Do you hear nothing but “click, click” when you turn the key? Is the BATTERY dash light on? Your vehicle is in need of engine electrical system repair, but...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $48.61 - $66.39
    • (0 reviews)
      # 24124607
      Ford Fusion 2010, Fuel Injection Throttle Body Mounting Gasket by Victor Reinz®, Use 1 per Car. OEM Standard. Material: Victo-Tech. When you’re low on oil, coolant or some other fluid, you may be tempted to just run down to the...
      OE quality fluids from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $9.10 - $10.00
    • (0 reviews)
      # 62422187
      Ford Fusion 2.3L 2010, Intake Manifold Gasket Set by Dorman®. Dorman's Intake Manifold Gasket Sets include all the gaskets and other hardware necessary for a complete, exact repair. In certain applications, dorman-improved metal...
      Kit provides ease and convenience of useAirtight gasket seal prevents vacuum and in some cases coolant leaks
      $15.49
    • (0 reviews)
      # 40640200
      Ford Fusion 2010, Intake Manifold Gasket Set by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the...
      Direct OEM replacement for a proper fitEnsure reliable sealing performance
      $20.44 - $52.89
    • (0 reviews)
      # 93526418
      Ford Fusion 3.5L 2010, Intake Manifold Gasket by Genuine®. Location: Overflow Pipe to Manifold. If you have a dirty air filter, clogged PCV valve, or defective MAF sensor you may be tempted to just run down to the local auto parts...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $10.07
    • (0 reviews)
      # 44700901
      Ford Fusion 3.5L 2010, Intake Plenum Gasket by Genuine®. If you have a dirty air filter, clogged PCV valve, or defective MAF sensor you may be tempted to just run down to the local auto parts chain store for a replacement, but...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $18.25
    • (0 reviews)
      # 44837561
      Ford Fusion 2010, Manifold Absolute Pressure Sensor Connector by Standard®. 4 Terminals Female Connector. Finish: Black. SMP’s vision is to be the leading independent supplier to the automotive aftermarket, providing the highest...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $35.33
    • (0 reviews)
      # 23891321
      Ford Fusion 2010, Mass Air Flow Sensor Connector by Motorcraft®. This product is perfect for electrical repairs on Ford, Lincoln, and Mercury vehicles. Designed and engineered to strict Ford Motor Company specifications, Motorcraft...
      Direct OEM replacementDesigned and engineered to strict Ford Motor Company specifications
      $37.39
    • (0 reviews)
      # 87634206
      Ford Fusion US-Built 2010, PRO-TEC™ Air Filter Panel by WIX®. Inner Diameter Top: Closed. Style: Air Filter Panel. Considering as much as 10,000 gallons of air must pass through the air filter for every gallon of fuel the engine...
      Maximum efficiency reduces engine wearNine pleats per inch
      $7.38 - $9.02
    • (0 reviews)
      # 99035730
      Ford Fusion 2010, Mass Air Flow Sensor by Standard®. SMP’s vision is to be the leading independent supplier to the automotive aftermarket, providing the highest quality products, competitive prices and the highest reputation for...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $118.71
    • (0 reviews)
      # 80952463
      Ford Fusion 3.5L 2010, Throttle Position Sensor by Standard®. SMP’s vision is to be the leading independent supplier to the automotive aftermarket, providing the highest quality products, competitive prices and the highest...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $36.53
    • (0 reviews)
      # 360268
      Ford Fusion 2.5L 2010, SP Series Cold Air Intake System by Injen®. HP Gain: +12 hp. Torque Gain: +11 lbs. x ft. Includes: X-1014 Filter. The SP Series Cold Air Intake System is made for the enthusiast who wants maximum horsepower...
      Delivers more oxygen to the combustion chamber by drawing in cooler airUses the patented MR Technology tuning process to ensure the air/fuel ratio is within optimum limits
      $250.80
    • (1 reviews)
      # 324140
      Ford Fusion S / SE / SEL 2.5L 2010, 69 Series Typhoon Cold Air Intake System by K&N®. Replacement Filter # RU-4960. Use with Pre-Filter # RX-4990DK. Air Filter Height: 5.5" (140 mm). Air Filter Large End Diameter: 6" (152 mm). Air...
      Guaranteed to increase horsepower and improve accelerationCustom designed and engineered for each application
      $297.99
    • (1 reviews)
      # 44218519
      Ford Fusion 2010, Secret Weapon Air Intake System by Weapon-R®. Pipe Finish: Polished. Foam Filter Finish: Gunmetal/Black. The Secret Weapon Air Intake System uses patented technology to feed the engine 3 times as much air as other...
      Patented technology increases airflow 3 times more than conventional systemsEach system is tuned to maximize engine performance output
      $211.65 - $271.15
    • (0 reviews)
      # 137975144
      Ford Fusion 3.0L 2010, Stealth Secret Weapon Air Intake System by Weapon-R®. Pipe Finish: Flat Black. Foam Filter Finish: Gunmetal/Black. Cooler air inlet temperatures mean more horsepower. This simple to install kit makes it easy...
      Increased engine airflow for low costIncludes the revolutionary Secret Weapon Air filter
      $245.65
    • (1 reviews)
      # 13546175
      Ford Fusion 3.0L 2010, Powr-Flo™ Mass Air Flow Sensor by JET®. JET Powr-Flo Mass Airflow Sensors will increase your engine's horsepower, low-end torque, and mileage by replacing the restrictive stock MAF sensor which limits your...
      Increase Horsepower And Low End TorqueImproved Mileage
      $158.96
    • (0 reviews)
      # 78058271
      Ford Fusion 152 CID / 183 CID 2010, Mass Air Flow Sensor by Spectra Premium®. Material: Plastic/Aluminum. Includes Sensor only. Spectra Premium’s complete line of new Mass Air Flow Sensors, featuring Ceramic PC boards to ensure...
      Provide more consistent voltage to eliminate engine rough idle problemsPlatinum connector threads reduce the number of connection points for faster reaction to change
      $83.24
    • (0 reviews)
      # 918893
      Ford Fusion 2010, Magnum Flow Pro 5R Panel Air Filter by aFe®. This Pro 5R air filter provides performance filtration and maximum convenience. Constructed with 100% polyurethane on all sides, this high flow cotton gauze OE...
      Deep Cotton Pleats for Increased FlowFits In Factory Housing
      $56.95
    • (0 reviews)
      # 921750
      Ford Fusion 2010, Magnum Flow Pro Dry S Panel Air Filter by aFe®. Constructed with 100% polyurethane on all four sides, this high flow "oil-free" OE replacement performance filter will outflow stock paper filter for improved...
      For Improved Horsepower And TorqueLimited Lifetime Warranty
      $56.95
    • (0 reviews)
      # 3353322
      Ford Fusion 3.5L 2010, Factory Replacement Air Filter by GREEN FILTER®. Replace your factory air cleaner filter element with a Green Filter oiled-cotton filter and never buy another filter as long as you own your vehicle. Enjoy...
      Cleanable, reusable filter element will outlast your carTraps particles as small as 5 microns
      $48.18
    • (3 reviews)
      # 319501
      Ford Fusion 2010, 33 Series Panel Air Filter by K&N®. Filter Material: Cotton Gauze. Includes: 1 Air Filter. K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration....
      Improves engine airflowIncreases horsepower and acceleration
      $48.99 - $49.99
    • (0 reviews)
      # mpn469956955
      Universal Intake Tube Seals by Merchant Automotive®. Comes as a package of two for service of one engine.
      $7.66
    • (0 reviews)
      # mpn1279446
      Universal Air Cleaner S-Stud by Spectre Performance®. Color: Silver. Length: 5" (127 mm). Material Used: Steel. Package Quantity: 1. Includes: 1 Mounting Bolt. Rooted in racing, Spectre Performance designs and builds every product...
      High-tech engine parts for the most power and best performanceThe finest exterior and interior parts for superior appearance and functionality
      $5.10
    • (0 reviews)
      # mpn1271888968
      Universal Air Cleaner Lid Seal by SoffSeal®. This versatile sponge extrusion has a height of 3/8" and a width of 5/16". It is typically used as a air cleaner lid seal.
      $3.34
    • (0 reviews)
      # mpn1640291
      Universal Metal Raw Aluminum Cold Air Intake System by AEM®. Replacement Filter # 21-2059DK. Use with Pre-Filter # 1-4001. Tube Material: Metal. Tube Finish: Raw Aluminum. To deliver cooler air to the engine, this air intake system...
      Delivers more oxygen to the combustion chamber by drawing in cooler airCustom designed and engineered to deliver maximum power for each specific vehicle
      $319.99
    • (0 reviews)
      # 107660077
      Universal Apollo Cold Air Intake System by K&N®. Replacement Filter # RC-5052. Air Filter Material: Cotton Gauze. Clamp Style: No Clamps Required. Filter Material: Cotton Gauze. Height: 4.875" (124 mm). Intake Pipe Finish: Flat...
      Guaranteed to increase horsepower and improve accelerationIdeal for normally aspired engines up to 250 BHP and turbo engines up to 350 BHP
      $129.99 - $209.99
    • (0 reviews)
      # 125352732
      Universal Air Intake Kit by Spectre Performance®. Replacement Filter #: 8168. Air Filter Color: White. Air Filter Height: 2.625" (67 mm). Air Filter Material: Non-woven Synthetic. Intake Pipe Color: Polished. Intake Pipe Material:...
      High-tech engine parts for the most power and best performanceThe finest exterior and interior parts for superior appearance and functionality
      $50.24
    • (0 reviews)
      # mpn1632162
      Universal Dragon Air Intake System by Weapon-R®. Size: 3" I.D., 8" Straight Pipe. If you’re hungry for more power, performance and torque, this top-of-the-line intake system is sure to blow you away. This high-flow design of...
      Brings a cold intake charge to the engineComputer designed
      $126.65
    • (0 reviews)
      # mpn1632134
      Universal Secret Weapon Air Intake System by Weapon-R®. Size: 3" I.D., 8" Straight Pipe. The Secret Weapon Air Intake System uses patented technology to feed the engine 3 times as much air as other systems. As a result, engine...
      Patented technology increases airflow 3 times more than conventional systemsEach system is tuned to maximize engine performance output
      $169.15
    • (0 reviews)
      # mpn611211179
      Universal 14" Chrome Air Cleaner by Demon Carburetion®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Demon...
      14" in diameter3" deep filter element
      $44.02
    • (4 reviews)
      # mpn1571696
      Universal Filter Recharge Kit by Injen®. Includes: Cleaner and Charger Oil. Keep your Injen cotton gauze High Performance air filter in top shape with the Air Filter Recharge Kit. It includes the 12oz. filter cleaner that loosens...
      $11.12
    • (0 reviews)
      # 85003602
      Universal, Vacuum Pump Bracket by Moroso®. With this quality part backed by a great price, you can enjoy your vehicle so much more than you thought was possible. This Moroso part is specifically engineered to make your vehicle run...
      $99.67 - $129.60
    • (0 reviews)
      # 108343303
      Universal Brute Force™ DryFlow Oval Tapered Air Filter by AEM®. Flange Length: 1.5" (38 mm). Flange Type: Centered. Top Outside Length: 9.5" (241 mm). Top Outside Width: 6.75" (171 mm). These filters are much larger than standard...
      Exceeds the normal airflow capacity of large displacement enginesEasy to clean – no oiling required
      $71.99 - $76.99
    • (1 reviews)
      # 108343342
      Universal Brute Force™ DryFlow Round Tapered Air Filter by AEM®. Top Style: Rubber. These filters are much larger than standard DryFlow filters and engineered to exceed the airflow requirements of large displacement engines. They...
      Exceeds the normal airflow capacity of large displacement enginesEasy to clean – no oiling required
      $49.99 - $55.99
    • (0 reviews)
      # 108343391
      Universal DryFlow Oval Tapered Air Filter by AEM®. Let your engine breathe with an AEM DryFlow filter! Every DryFlow filter is engineered to exceed the engine's normal airflow requirement. And thanks to AEM's DryFlow technology,...
      Exceeds the engine’s normal airflow capacityEasy to clean – no oiling required
      $39.99 - $97.99
    • (2 reviews)
      # 108343412
      Universal DryFlow Round Straight Air Filter by AEM®. Top Style: Rubber. Let your engine breathe with an AEM DryFlow filter! Every DryFlow filter is engineered to exceed the engine's normal airflow requirement. And thanks to AEM's...
      Exceeds the engine’s normal airflow capacityEasy to clean – no oiling required
      $27.53 - $39.99
    • (2 reviews)
      # 108343461
      Universal DryFlow Round Tapered Air Filter by AEM®. Top Style: Rubber. Let your engine breathe with an AEM DryFlow filter! Every DryFlow filter is engineered to exceed the engine's normal airflow requirement. And thanks to AEM's...
      Exceeds the engine’s normal airflow capacityEasy to clean – no oiling required
      $38.99 - $64.99
    • (1 reviews)
      # 108343546
      Universal XStreme™ Racing DryFlow Round Tapered Air Filter by AEM®. Base Outside Diameter: 6" (152 mm). Flange Type: Centered. Top Outside Diameter: 5" (127 mm). Top Style: X-Stream. Let your engine breathe with an AEM DryFlow...
      Exceeds the engine’s normal airflow capacityEasy to clean – no oiling required
      $68.99
    • (0 reviews)
      # mpn57019828
      Universal Aries Powersport Pro Dry S Panel Air Filter by aFe®. Dominate the street or the track with this superior high-performance air filter designed to bump up horsepower, performance and acceleration to the next level. It...
      aFe Aries AE 1 air filters are constructed out of 4-layers of synthetic media for maximum protection and requires no oils to cleanFilter housing is constructed out of pliabel urethane with a bump seal for a complete seal. Filters also include gaskets and require no glues or adhesives
      $34.95
    • (0 reviews)
      # 107149564
      Universal Magnum Flow IAF Pro 5R Air Filter by aFe®. With five layers of progressively finer mesh cotton gauze media between 100% polyurethane top and base, this high flow "oiled" conical performance filter provides excellent...
      Improves airflow and engine performanceProvides superior air filtration and engine protection
      $56.95 - $99.95
    • (1 reviews)
      # 107149572
      Universal Magnum Flow IAF Pro Dry S Air Filter by aFe®. With three layers of progressively finer mesh synthetic media between 100% polyurethane top and base, this high flow, “oil-free” conical performance filter provides...
      Improves airflow and engine performanceProvides superior air filtration and engine protection
      $42.95 - $105.95




    Guides & Articles

    • Ignition Parts
      Auto Parts: Dealer vs. Aftermarket
      The question of whether to buy parts from an automotive dealer vs. ones from aftermarket manufacturers is as age-old as the automobile itself. Below, we'll take a look at things worth considering to help you make a better choice if you're facing that same question. Automobile manufacturers and dealerships always advertise the fact that their parts are "genuine" because they were made by the exact same production facility that made the parts installed on the assembly line.
    • Replacement Air Intake Parts
      Why Does My Car Have a Plastic Intake Manifold?
      An intake manifold is an integrated assembly that sits atop the engine, consisting of a series of tubes which distribute fresh outside air to each and every cylinder. On V-shaped engine blocks, an intake manifold typically sits between the two cylinder banks while inline engines may feature a manifold to the side of the cylinder head. Intake manifolds serve as a mounting point for carburetors, throttle body assemblies, fuel injectors, thermostats, and more depending on vehicle manufacturer engineering preferences. Intake manifolds may also serve to route coolant through dedicated channels in order to remove heat from the engine. Because of their location and functionality, intake manifold assemblies are under constant stress from engine vacuum pressure as well as direct heat from coolant, cylinder combustion gasses, and the cylinder heads to which they are mounted.

    Popular Products

    2010 Ford Fusion Air Intake Parts Reviews

    Average rating:  5  5 - 1 review
    5 of 5
    Weapon-R® Air Intake System
    Very easy to install in just few minutes, only thing that gave any trouble was the airflow senser which I just needed to shave a bit on the intake and put in. Complete install took less than 15 minutes, car has a very nice growl at full throttle and when driving normal I have picked up about 3 miles per gallon with regular gas.
    DPosted by Darren (North Tazewell, VA) /
    2010 Ford Fusion
    Was this review helpful for you? Yes
    Related 2010 Ford Fusion Pages
    2010 Ford Fusion Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.