AIRAID® - PowerAid™ Throttle Body Spacer

6 reviews|Item # mpn2529864|Similar Products
$149.99
In Stock (74) - Ships in 24 to 48 hrs
Vehicle Specific
  • Please Select Vehicle Below
Authorized Dealer

Product Details

PowerAid™ Throttle Body Spacer by AIRAID®. The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it’s unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.

Specifications

Thickness: 1.000"
Material: Aluminum
Finish: Red

Includes

  • Spacer
  • Gaskets
  • Mounting Hardware
  • Brackets
  • Instructions

Features

  • Enhances fuel atomization, which improves combustion and engine efficiency
  • Increases low end torque and fuel economy
  • Easy to install, takes less than 1 hour with simple hand tools
  • CAD designed and dyno tested for each specific application
  • Manufactured from aircraft-grade 6061 T-6 aluminum
  • Backed by AIRAID's "No Hassle" warranty
  • Proudly made in the USA

There are many companies that make products to improve airflow to your engine. AIRAID is one of the few that's thought of how to improve that airflow once it gets there. The result of their research and testing is the PowerAid™ Throttle Body Spacer. The PowerAid™ Spacer is about 1-in. thick and installs between the throttle body and intake manifold. It features AIRAID's unique and patented Helix Bore, which creates a spinning action as the incoming air passes through the throttle body. The helical effect causes the air molecules to organize and maintain high velocity, all the way into the combustion chamber. Combustion is improved and engine efficiency increased. The results you experience are tremendous torque gains from 800-2500 rpm, along with gains in fuel economy.

Each PowerAid™ spacer is computer designed and dyno tested for the specific application. It's manufactured from high quality, aircraft-grade 6061 T-6 aluminum. Everything required for installation comes with your spacer, including gaskets, hardware, the necessary brackets and detailed instructions. And it can be installed in less than an hour with simple hand tools.

PowerAid™ spacers are available for vehicles with electronic throttle bodies and vehicles with throttle cables. They're also available with PowerPorts™. PowerPorts™ are specially located ports in the spacer that are drilled and tapped for instrumentation sensors or power enhancements like Nitrous Oxide.

AIRAID® was founded in 1997 when they began developing and manufacturing air intake systems for light trucks and SUVs, utilizing the cotton-gauze filter technology that was available at the time. These systems increased airflow and performance while being easy to install, and sold so well that the company soon realized that another source of filters was necessary. They believed they could produce a better quality filter using new technology and state-of-the-art materials, and so in 2002 the AIRAID Filter Company was formed. Today AIRAID is the recognized leader in air management technology. Extensive research and development has allowed AIRAID to come to market first with high quality products that improve drivability and performance.

Brand:
Part Number:
200-617
UPC:
642046206178
Alternate MPN:
200617

Vehicle Fitment

Cadillac
Escalade 2007-2014
Chevy
Avalanche 2007-2013
Silverado 1500 2007-2013
Suburban 2007-2013
Tahoe 2007-2013
Trailblazer 2009
GMC
Sierra 1500 2007-2013
Yukon 2007-2013
Yukon Denali 2007-2013

Reviews

(6)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
AIRAID® - PowerAid™ Throttle Body Spacer
/5
1-6 of 6 Reviews
5 of 5
Excellent Product
AIRAID® - Throttle Body Spacer with 4 Bolt Holes
Great addition to my 2011 Chevy Silverado! I noticed more hp but the biggest difference was in the response from the throttle. When I press down on the accelerator I can feel a quicker punch. Very easy to install, It took me about 25 minutes. Looks good under the hood.
Posted by Harry (Fairburn, GA) / October 12, 20172011 Chevy Silverado
5 of 5
Great Product!
AIRAID® - Throttle Body Spacer with 4 Bolt Holes
Awesome addition to my Silverado! Noticed a little more hp but the biggest difference was in the response from the throttle. When I hammer down on the gas, I can feel a quicker punch. Very easy to install, took me 20 minutes. Looks good under the hood as the red pops! If you have a CAI and an exhaust, it's a great addition!
Posted by Seth (Avon, CT) / October 01, 20132013 Chevy Silverado
5 of 5
Throttle Body Spacer
AIRAID® - Throttle Body Spacer with 4 Bolt Holes
The AIRAID throttle body spacer is unique-looking with a nice appearance, and the installation took about 15 minutes. I'm not a mechanic and did the installation myself. No issues thus far with my truck and check engine light. So far so good. I do see a change in performance, and I get a lot more torque.
Posted by Brice (Rembert, SC) / June 26, 20132013 Chevy Silverado
5 of 5
Sweet!
AIRAID® - Throttle Body Spacer with 4 Bolt Holes
Love this product. It improved my fuel mileage by 4 mpg on the highway. I also love the whistle it makes a high rpm.
Posted by Matthew (Brandon, MB) / June 18, 20122009 GMC Sierra
5 of 5
Easy Bolt-On
AIRAID® - Throttle Body Spacer with 4 Bolt Holes
Took 10 minutes. There is a noticeable difference in low end. Don't know about mileage yet. I've been using TB spacers for over 15 years and they always add to low end and sometimes mileage. Excellent product especially for the money.
Posted by John (Leesville, LA) / May 10, 20122008 GMC Sierra
4 of 5
AirAid (PowerAid) TBS/AirAid intake
I installed both the PowerAid TBS and AIRAID intake w/ the non-oiled synthamax air filter. It was easier to do it this way since you have to un-bolt part of the intake manifold anyway. It takes a little longer that it states, but you want to do it right. You can hear the spinning action of the incoming air and really feel the extra boost @ 75-80 mph. You have to remember that I also installed the aftermarket intake. You may not receive the same results with the PowerAid by itself.
Posted by Ryan (Parlier, CA) / April 05, 20122007 Chevy Tahoe

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
CARiD FacebookCARiD TwitterCARiD YouTube ChannelCARiD PinterestCARiD Instagram
Inspiration Gallery
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS