Subaru Forester 2009-2013, Front Bumper Fog Light Hole Insert by Replace®. These small panels obscure holes in the bumper that, if left uncovered, would detract from the vehicle’s appearance. They can become dislodged and lost, or damaged in minor impacts. If you have a bumper insert/cover that is missing or sustained damage, you can pay the high price for a replacement part at the dealer, or you can save money and get a Replace bumper insert/cover. Replace has quality replacement bumper inserts/covers that are identical to original equipment (OE) for much less than the OE price.
- Same quality as OE for less money
- Designed with the latest software and manufactured with modern tooling
- Direct replacement
- Installs the same as factory unit
- Same dimensions as OE part
- Same gauge material as OE
- No vehicle modifications required for installation
- Backed by a limited lifetime warranty
Most bumpers are made to fit vehicles with a variety of trim levels. For example, a model with a higher trim level may have fog lights, where the same model less well equipped won’t have the lights but have covers installed in their place. These covers and inserts can be used to hide a variety of openings in the bumper, and if they go missing or become damaged, the vehicle can become unsightly.
In the past your options for replacing a damaged bumper insert/cover were finding a good used one, buying a cheap replacement, or paying big bucks for an OE bumper insert/cover. Because damage to these parts is so prevalent, searching for a useable piece from a scrap yard is a waste of time. And many cheap replacement bumper insert/covers don’t fit properly and aren’t even made of the proper gauge material.
Today you can fix your car or truck properly and have money left in your pocket with a new quality replacement bumper insert/cover from Replace. Replace offers OE quality body parts at less than original equipment prices. You get the same quality part that you’d get at the dealer without the high dealer price. A Replace bumper insert/cover will look and fit just like a bumper insert/cover from the dealer, so your car or truck will look new again. Replace bumper insert/covers are designed using the latest software so they exactly replicate the OE units, then they’re manufactured using the most modern tooling, so the end product looks and fits exactly as designed. A Replace bumper insert/cover is made to the same dimensions as OE with the same gauge material.
Body repair is expensive enough without paying more than necessary for quality parts. A Replace bumper insert/cover is the sensible alternative to the high dealer price markup. A Replace bumper insert/cover will get you back on the road in a car or truck that looks brand new, without breaking the bank. Replace is so confident in the quality of its bumper insert/covers that they’re backed by a limited lifetime warranty against defects in materials and workmanship for as long as the original purchaser owns the vehicle on which the part is installed. This includes perforation (metal rust-through) due to corrosion in normal use.23.34Brand: Replace Part Number: SU1038100 UPC: 615343406688
Replace® is dedicated to providing original equipment (OE) quality body parts and lights without the high OE price. Rather than deal with so-called "universal" parts that may or may not fit your vehicle, Replace sells only parts that have OE quality fit, function and appearance. They believe such parts should be affordable so you can repair your vehicle to its former state, restoring your pride of ownership and preserving its resale value. With Replace parts you can just say no to high dealer prices.Replace® - Front Bumper Fog Light Hole Insert Reviews (10)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Customers' rating: 4.5 OF 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYRear Bumper Face Ba r- 2011 Dodge Ram Big| Posted by Douglas P. | 2012 Dodge Ram (Winter Springs, FL)
The product was delivered on time and I was able to install it with reasonable effort. The product looks great and is exactly the same as the factory installed bumper that was bent.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYNice| Posted by Kevin W. | 2002 Chevy Silverado (Desoto, TX)
Great product. The quality is very good, especially for the price. I upgraded to the platinum line and I can't see what could be better. I have 3 stars on installation because now that I'm looking back at the picture, I never received those brackets in the Pic, and now that it's on I know exactly where they need to be. Hmmm, guess I'll have to inquire about that, but when I receive the brackets it should be and easy bolt on. Great product tho.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(3.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2000 Durango Bumper Replacement| Posted by Jared A. | 2000 Dodge Durango (Minnetrista, MN)
Bumper was scratched on the side, box was torn and not well protected. Looked like someone had drug it around. Great price. Didn't want to deal with returning, so I used it. Hard to install using same rusty brackets and hardware, which is why I needed a new one! Add said bracket came with it, but would have been helpful to specify/illustrate as to which ones, as the outer 'L' brackets did not come with it, nor did the valence clips, which were all rusted/fused on to the old bumper. Needed a cheete rbar with a lot of WD-40 to get the old one off. New one went on fairly easy with some persuading with the old brackets and hardware.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYDecent| Posted by Tyler S. | 2010 Chrysler Sebring (Madison Heights, MI)
Just bought this bumper and am currently getting it painted (in the shop as we speak), and from what I have seen, so far it is looking good. The only complaint I have is that it cost 95$ for the shipping, which was more than the bumper itself. I know it was a large package, but still.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY
Replace® - Front Bumper Fog Light Hole Insert Reviews (10)View more 10 All Replace Bumpers reviews >>