Subaru WRX Sedan 2008, Block-It™ 380 Custom Taupe Car Cover (C17055TT) by Covercraft®. Without Spoiler, with 2 Mirror Pockets. This cover is designed with an advanced Kimberly-Clark film barrier that provides an excellent combination of lower cost and lighter weight. Also provides better-than-average outdoor protection from acid rain, UV rays, snow, tree sap, bird droppings, dirt, and other airborne contaminants. 3 layers of non-woven fabrics feature microscopic pores that keep dirt and most water out while remaining fully breathable. Custom-shaped to your make and model with pockets for one or both side mirrors, the bottom edging of this cover features elastic for a snug fit. Optional 500 Candle-power safety reflective edging and custom embroidery are available.
If your vehicle is parked outside, the Block-It 380™ Custom Car Cover offers three layers of protection to effectively keep up your vehicle's looks and value during all four seasons. The only type of cover that will keep your car completely dry during a heavy rainstorm is a plastic one. While the upside of a plastic cover is absolutely no water gets through, the down side is absolutely no moisture vapor and heat trapped underneath can get out - causing damage to paint and other surfaces as rot and decay quickly get a foothold. While rain will permeate the Block-It 380™ Custom Car Cover, water is the only thing that will make it through the microscopic pores found on all layers. Dirt, tree sap, minor hail stones, bird droppings, and other oily contaminants may land on top of the Block-It 380 cover, but they will not get through to your paint. The cover is washable - however Covercraft recommends using a commercial size washing machine for the most effective results.
High Performance Non-Woven Fabric
The three-layer construction uses inner and outer layers of spunbond, sandwiching a middle layer protective film barrier. The film barrier has microscopic holes, to stop moisture but still allow any moisture vapor or heat to easily escape from under the cover.
Designed with an advanced Kimberly-Clark film barrier fabric that provides an excellent combination of lower cost and lighter weight.
Elastic edging surrounds all sides to create a snug fit that is just right and not too tight.
Reinforced, non-scratch grommets include a protective flap on the backside and can be used with a tie-down rope.
Custom car covers follow the exact contours of vehicle. Car covers protect all the vehicle's exposed surface.
3 Year Warranty
Warranty coverage protects against defects in material and workmanship, as well as the fabric becoming unserviceable during normal use.
Made in the USA
Covercraft builds the car cover in the United States.
The Block-It 380 cover also offers protection from the sun's UV rays. Not only will that prevent paint from fading, rubber from drying out, and chrome from tarnishing, it prevents damage to materials inside your car. When your vehicle is covered regularly, dashboard materials remain soft without fracturing, leather doesn't dry out, and wood trim does not crack in multiple places due to heat expansion and contraction. Additionally, the annoying chemical haze that forms on the inside of windshields from heated plastic trim will be eliminated.
Among all of Covercraft's car covers, this is one of their thinner and more lightweight covers. A recently developed film coating from Kimberly-Clark allows this cover to have an inner layer that's thin but effective against contaminants and UV rays. It allows an inner and outer layer of Covercraft's best non-woven padded material to provide good protection from door dings if irresponsible drivers will be parking next to you on a regular basis. Sized for a custom fit on your vehicle, elastic edging surrounding the lower perimeter on all sides helps create a snug fit that doesn’t get in the way of removing the cover when the time comes to take it off. Covercraft builds the Block-It 380 in the United States, and backs it with a 3-year warranty against failure resulting from manufacturing defects.171.19Brand: Covercraft Part Number: C17055TT UPC: 883890430245 This part is compatible with 10 vehicle(s)
Founded in 1965 in the southern region of California, Covercraft® began with the efforts of two founders that were passionate automotive enthusiasts. Working out of a small shop, they began by doing what no one else was doing - creating and building car covers that were tailored for a custom fit on street rods and small European sports cars. Covercraft’s philosophy of custom fit design, continuous refinement, and materials development has earned them respect throughout the industry for products that are easy to use, soft to the touch, and durable. Because whether you’ve got a car parked outside facing an onslaught from intense hot sun, salty sea mist, tropical rain, or brutal winter weather conditions, Covercraft has the fabrics you need to maximize protection of your vehicle, at prices you can afford. CARiD offers great values on the full Covercraft product range of car covers, pickup cab covers, convertible top-down interior covers, seat covers, interior organizers, trunk organizers, and much more.
Product Reviews (0)
Product Reviews (0)