Jeep Wrangler 2008, XHD Front Modular Bumper System by Rugged Ridge®. If you're a serious off-roader, you need this bumper. It's simply the toughest and most versatile bumper ever made. The base bumper is available set up for a winch or lights, and from there you configure it literally dozens of ways with your choice of bumper ends and bars. All components are made of heavy-duty powder coated steel, with many components also available in polished 304 stainless steel.
Fitment Notes: XHD Modular Bumper Components Do Not Interchange With XHD Aluminum Bumper Components.
- Base bumper design provides clearance for front tires and allows for increased approach angle
- Base bumper includes D-rings and cutouts for factory fog lights
- Base bumper available configured for a winch or as a light mount base
- Available with optional standard, stub, storage and tubular bar ends
- Available with optional Hoop Over-Rider, Stinger, and Rock Crawler Hoop
- All components made of heavy-duty textured black powder coated steel
- Non-winch mount bumper, Hoop Over-Rider, standard bumper ends, tube bumper ends and D-rings available in polished 304 stainless steel
- Comes complete with installation instructions and mounting hardware
- Matching rear bumpers are available
- Backed by a 5-year limited warranty
Your stock bumper isn't up to serious 4-wheeling. It's made for the road and highway regulations, sticks out too far for steep approach angles, and can't accommodate most off-road accessories. If you've made the decision to replace your front bumper you can't do better than this modular bumper from Rugged Ridge. It's made to handle any amount of off-road abuse, with a modular design that can form the base for a myriad of optional accessories. You can configure this bumper just the way you want it, or get several accessories to alter the look when you're in the mood for a change. And unlike most aftermarket bumpers, you won't have to drill or modify your bumper to mount bumper accessories. Each accessory in this modular bumper system is made for the bumper, with easy bolt-on installation.
The base bumper comes set up for a winch or as a light mount. The winch-mount bumper does not include a winch or fairlead and requires optional mounting plates if installing a Warn Power Plant Winch. The bumper attaches to the frame with 4 bolts, providing the toughest bumper attachment found anywhere, while creating 2 overbuilt pull points. It mounts close in on the frame rails where it's drawn closer to the body to increase the approach angle, and the narrow overall width gives enormous clearance for oversized tires. The bumper includes D-rings and cutouts for the factory fog lights.
Four different optional bumper ends are available including the stubby ends, which add an aggressive look while keeping the bumper narrow, the standard ends, with an upturned shape for ground clearance, the tube ends, for a traditional look, and the storage ends, which offer watertight, lockable storage for recovery gear or other valuables. The optional Hoop Over-Rider mounts to the top of the bumper and provides protection for the grille, while the Stinger and RRC (Rock Crawler) Hoop mount to the top and the front of the bumper (in place of the D-rings).
All components are manufactured from heavy-duty textured black powder coated steel, with a tough E-coat undercoating. The Non-winch, light mount bumper, Hoop Over-Rider, standard bumper ends, tube bumper ends and D-rings are also available in polished 304 stainless steel for a different look. Both finishes will provide years of heavy-duty use.
All components come with mounting hardware and detailed instructions to guide you through an easy installation. The XHD Modular Bumper System is backed by a 5-year limited warranty.299.99 1,202.99
Brand: Rugged Ridge Part Numbers:
Rugged Ridge® is a division of Omix-Ada, the leader in Jeep replacement parts. Based in Suwanee, Georgia, Rugged Ridge was begun almost two decades ago when the enthusiasts at Omix-Ada decided that even a vehicle as tough as a Jeep could be improved upon. Since then, Rugged Ridge has created over 500 accessories to improve your Jeep’s performance, utility and appearance. Unlike parts made for ordinary vehicles, Rugged Ridge knows that every part made for a Jeep must uphold the Jeep tradition of strength and capability, so every part is designed, tested, manufactured and tested again to make sure it’s perfected. Then and only then can it be installed on your Jeep.
Product Reviews (0)
Product Reviews (0)
You will never pay more with CARiD! Not only will we match prices from any competitor's website or other reputable source, we will continue to honor that promise for up to one year after your purchase.
We'll match the price at time of purchase, or refund you the difference if done after the purchase. Either way, we are totally committed to providing you the best online shopping experience.
We're car and truck enthusiasts, just like you! And it's enthusiasts we hire in our Sales and Service Centers. Many of our staff are ASE certified and have spent years in the retail auto business.
We conduct our own in-house training, and we even bring vendors to us for hands-on product training demonstrations. You're getting true expertise when you phone or email us!
With hundreds of vendors, and tens of thousands of components for sale, we put tremendous effort into coordinating our data with our vendors' data in order to guarantee that you get the correct part.
Our huge database is regularly cross-checked to keep it current and optimized. At times, our thoroughness makes our data even more accurate than our suppliers! This rigorous process means that you can always order with confidence.