Toyota Sequoia 2001-2007, Factory Style Rear Spoiler with Light by JKS®. Spoilers are usually standard equipment on the factory hot rods. But even if you don't have the big horsepower engine under the hood, you can still give your car the same look as the high-performance models with this Rear Spoiler. Inexpensive and easy to install, for a little time and money you can improve your car's appearance and aerodynamics.
- Factory high-performance style
- Improves aerodynamics
- Made from Fibre-reinforced plastic
- Available painted and unpainted
- Incorporates 3rd brake light
- Installs easily with screws and gaskets
- Comes with everything required for installation
- 90-day warranty
At high speed, a rear spoiler can provide downforce, prevent airflow separation, and reduce drag and instability. Most people never drive their cars fast enough to get these benefits, but the appearance of the spoiler on the trunk lid implies the car's capability. That's why a rear spoiler is usually found on factory performance cars, it gives the impression of speed even when the car's parked.
Now you can give your car the image of speed with the JKS® Factory Style Rear Spoiler with Light. It's made from high quality material such as Fibre-reinforced plastic. This spoiler also includes a 3rd brake light for increased safety. It's secured with screws and gaskets, depending on application. All necessary mounting hardware and comprehensive instructions are included.
And although it can be ordered unpainted, we strongly encourage you to select the painted option. Our computerized paint mixing system enables us to guarantee that your spoiler will match your factory paint, and it's unlikely that a local body shop will be able to paint your spoiler for less than the price difference.108.55 225.45
Brand: JKS Part Numbers:
JKS® is the pre-eminent manufacturer of automotive styling products. Their extensive experience in the automotive aftermarket enables them to develop unique, cutting edge products for the discerning motorist. All JKS® products are made from the finest materials and hand-crafted to ensure precision fit and exceptional appearance. The company’s mission is to continually anticipate and exceed the expectations of their customers.JKS® - Factory Style Rear Spoiler with Light Reviews (4)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Customers' rating: 4.5 OF 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYToyota Sequoia Rear Spoiler| Posted by Gary L. | 2001 Toyota Sequoia (Bozeman, MT)
I was pleasantly surprised by the promptness in which I received the spoiler, particularly since it had to be painted. It matched the car perfectly. Once installed, it looked like the original factory spoiler. I saved myself over $1,000.00 by removing the damaged spoiler and installing the CARiD spoiler. I would not hesitate to do business with CARiD again. Very Satisfied!Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYSequoia spoiler| Posted by Robert V. | 2008 Toyota Sequoia (Union, KY)
Installed this on my SR5 Sequoia. Ordered the black painted version (202 paint code), paint quality and finish was perfect. Installation takes some guts, guts to drill holes in you5 $50,000 baby that is. Installation notes: 1) Use a friend to help you position and check your alignment. Check it twice, no check it three times, you're drilling holes! 2) Holes to be drilled are determined by inserting long plastic straps into the mounting holes on the spoiler, positioning the spoiler on the tailgate and then taping the straps to the body. Remove the spoiler and the straps stay on the body as a drilling guide. They could be longer for the two end holes but they do work. 3) The positioning straps included are a little too large for the pre-drilled holes. Use a knife and whittle down the OD so they slip off easy after taping into position on the tailgate. If they move, you'll drill in the wrong location. They worked for me but I spent a lot of time making sure I was perfect. 4) Buy some primer to dress the drilled holes to prevent rusting. Let dry! before attaching or your screws will mess up the coating. 5) The two outer holes line up perfect with the factory access hole locations. Just remove the rubber plugs and access. 6) The two center holes require you to pull the upper garnish off and drill some rather large access holes. These have to be a large OD to allow your nutdriver to fit in. 7) Stop lamp - I drilled a fifth hole for the wire harness but you could remove the existing HMSL. 8) Wiring - no fittings are included. I pulled the plug on the factory HMSL and then bought Scotch suitcase (IDC) connectors to splice into the brake light wiring. 9) On the Sequoia be careful, the TMPS antenna and ECU wires are in the same bundle as the brake light. Be sure of what wires you're splicing / cutting or tap into! 10) I applied RTV from the inside to cover the screws and wire harness hole to ensure no leaks and lock the screws in place. End Result: Can't tell the difference from the factory spoilers. Looks perfect.Was this review helpful for you? YesNo(3.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYOEM Factory Style - Lighted Rear Spoiler| Posted by Russell A. | Toyota Sequoia (Tracy, CA)
Everything but installation was great! I have not experience in installing spoilers, but it would've been so much easier if the screws provided actually fit the pre-drilled holes on the spoiler. I had to go find screws that fit to complete the installation.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYSequoia spoiler| Posted by Felix C. | Toyota Sequoia (Woodbridge, VA)
I couldn't be any happier, although there were parts missing during the shipment, I got what I wanted. My car is still at the shop but I know that it'll make a difference once it gets released.Was this review helpful for you? YesNo
JKS® - Factory Style Rear Spoiler with Light Reviews (4)All JKS Spoilers reviews >>