Wilwood® - HI-TEMP Brake Fluid

2007 Subaru WRX
Wilwood® - HI-TEMP Brake Fluid Wilwood® - HI-TEMP Brake Fluid Wilwood® - Company Overview Wilwood Authorized Dealer
Item Number: 15885952
0(0 ratings)
Availability: Varies
Depends on Product Options

HI-TEMP Brake Fluid by Wilwood®. Wilwood’s specially formulated Hi-Temp° 570 Racing Brake Fluid has a minimum 570° F. dry boiling point of to withstand the severe heat requirements of automotive racing. Hi-Temp° 570’s low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal.

Lowest Prices
Price match guarantee
Easy Returns
Quick, Simple, Free
In-House Experts
We know our products
Guaranteed Fitment
Always the correct part
Product Options
Select Product Options
20% offMADE IN USA
Originally $62.45 - $199.56
$49.96 - $159.65
Add to Cart
Select Product Options
Wilwood® - HI-TEMP Brake Fluid

HI-TEMP Brake Fluid

HI-TEMP Brake Fluid by Wilwood®. 12oz Bottle. Wilwood’s specially formulated Hi-Temp° 570 Racing Brake Fluid has a minimum 570° F. dry boiling point of to withstand the severe heat requirements of automotive racing. Hi-Temp° 570’s low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal.

QUANTITY:
PLEASE SELECT
    $14.34
    Total: $0.00
    Add To Cart Cancel
    Product Details

    HI-TEMP Brake Fluid by Wilwood®. Wilwood’s specially formulated Hi-Temp° 570 Racing Brake Fluid has a minimum 570° F. dry boiling point of to withstand the severe heat requirements of automotive racing. Hi-Temp° 570’s low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal.

    Wilwood - About

    Features:

    • Racing Brake Fluid
    • Available in single bottle, six-packs, or economical 24 bottle cases.
    • Maximum Protection
    • Made in USA

    Hi-Temp° 570 comes in convenient 12 ounce containers hermetically sealed to guarantee against unwanted absorption of moisture which can drastically lower the fluids boiling point (fluid from larger containers tends to become contaminated with moisture, lowering its boiling point and making it unsuitable for racing applications.

    Due to the extreme operating temperatures of a high performance brake system, standard off-the-shelf brake fluids are not recommended. Of critical importance in determining a fluids ability to handle high temperature applications is the Dry Boiling Point and compressibility. The Dry Boiling Point is the temperature at which a brake fluid will boil in its virgin non-contaminated state. The highest temperature Dry Boiling Point available in a DOT 3 fluid is 572 degrees F.The Wet Boiling Point is the temperature a brake fluid will boil after it has been fully saturated with moisture. The DOT 3 requirement for wet boiling point is a minimum temperature of 284 degrees F.There are many ways for moisture to enter your brake system. Condensation from regular use, washing the vehicle and humidity are the most common, with little hope of prevention. Glycol based DOT 3 & 4 fluids are hygroscopic; they absorb brake system moisture, and over time the boiling point is gradually reduced. Wilwood does not recommend using DOT 5 fluid in any racing applications.

    DOT 5 fluid is not hygroscopic, so as moisture enters the system, it is not absorbed by the fluid, and results in beads of moisture moving through the brake line, collecting in the calipers. It is not uncommon to have caliper temperatures exceed 200 degrees F, and at 212 degrees F, this collected moisture will boil causing vapor lock and system failure. Additionally, DOT 5 fluid is highly compressible due to aeration and foaming under normal braking conditions, providing a spongy brake feel. Whenever you add fresh fluid to your existing system (never mix fluids of different DOT classifications), it immediately becomes contaminated, lowering the boiling point of the new fluid. For maximum performance, start with the highest Dry Boiling Point available (try Wilwood Hi-Temp 570 Racing Brake Fluid), flush the system completely, and flush it regularly, especially after severe temperatures have been experienced.

    49.96 159.65
    Brand: Wilwood       Part Numbers:
    paypal credit Wilwood Brakes

    Wilwood Engineering designs and manufactures high-performance disc brake systems. Since founding in 1977, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Their core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.

    Product Reviews (0)
    Product Reviews (0)
    More Accessories