Subaru WRX STI 2006-2007, CW-Style Carbon Fiber Side Skirts (SS0607SBIMP-CW) by SEIBONŽ, 1 Pair. Give your car a high-tech aerodynamic look with these carbon fiber side skirts. Side skirts minimize the amount of air flowing under the car, and make it look like it's "hugging" the road. Whether you're a racer or just want to look the part, you can depend on SEIBON for style, performance, light weight and durability. SEIBON components are carefully hand-crafted using only the finest materials.
- Finished in glossy clear coat that will not chip or flake
- Aerodynamically designed
- One-piece carbon sheet construction for consistent weave pattern
- Exceptional carbon/resin ratios for high stiffness and extra product strength
- Manufactured from the highest grade carbon fiber raw material
- Up to 50% lighter than original panel
- Over 15 years' experience creating carbon fiber components
- 6-month limited clear coat warranty
- This product is designed for style and performance. Please be aware of your local laws and regulations
SEIBON creates performance oriented carbon fiber body panels that save weight, add style and are durable enough to hold up under grueling racing conditions. The production team at SEIBON has over 15 years' experience, and they use the latest cutting-edge technology to manufacture hand-laid or vacuum infused carbon fiber panels.
Construction starts with the highest grade carbon fiber raw material, the same kind used in aviation, satellites and rockets. All SEIBON panels are made with 1-piece carbon sheet, so appearance and strength are not impaired by the broken lines and patterns characteristic of multiple sheets put together. The carbon sheet is supported by a fiberglass "skeleton", but SEIBON builds the carbon sheet into the mold so it doesn't break and split, like inferior carbon fiber panels where the carbon is only wrapped around the skeleton.
SEIBON uses a clear coat finish, for a shiny, durable "wet" look, as opposed to the duller finish found on panels with a gel-coat finish. A special mix of high-tech resin results in excellent transparency with no clear coat chips or flakes. SEIBON's construction process also utilizes a high carbon/resin ratio, for exceptional product stiffness and high strength. The end result is a strong, durable, attractive panel that will look great on your car and weigh up to 50% less than the original panel.
Once created, all SEIBON carbon fiber components are meticulously inspected for quality and to ensure fitment. However, the buyer should understand that no aftermarket body part will fit exactly like the original equipment part. Some products may require minor modifications, and minor adjustments may be necessary as part of the normal installation process. We recommend professional installation by an installer familiar with the installation of aftermarket carbon fiber components. If parts are to be painted they should be pre-fit to the vehicle before painting because painted products cannot be returned.
To prevent damage to carbon fiber hoods and trunks/hatches, SEIBON recommends that the stock springs or shocks/dampers/struts not be reinstalled. SEIBON also recommends that hood pins be installed for safety when installing a carbon fiber hood.
SEIBON will replace any carbon fiber component that exhibits heavy cloudiness under the clear coat or has a clear coat bubble larger than 3/8". They will also replace any panel where the clear coat changes more than a full shade within 6 months. Slight fading and discoloration over time is natural. To preserve carbon fiber hood finish, SEIBON recommends that the heat shield from the original hood be transferred to the carbon fiber panel, or that an aftermarket heat shield product be installed.612.00Brand: SEIBON Part Number: SS0607SBIMP-CW
SEIBONŽ Carbon, a division of SEIBON International, Inc., specializes in the design and manufacture of high-quality carbon fiber automotive body components such as hoods, trunks, fenders, and aerodynamic body additions such as rear spoilers and side skirts. The company was founded by genuine automotive aficionados, and debuted in the automotive aftermarket industry in 2003. They realized that there was a demand for top-quality, durable carbon fiber components among other like-minded enthusiasts, and they set out to create the best products in the industry. All products are stylish and functional. Everything is made from deluxe French or US-made carbon fiber, and is rigorously-inspected during our multiple-step quality control process. In-house design team introduces and maintains proprietary designs for a wide and growing variety of sport compact applications.SEIBONŽ SS0607SBIMP-CW - CW-Style Carbon Fiber Side Skirts Reviews (1)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Customers' rating: 4.5 OF 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYSeibon OEM Subaru Carbon Fiber Trunk| Posted by Dakota H. | 2011 Subaru WRX (Elko, NV)
Product is great, went on with ease and looks freaking awesome, no alignment issues what so ever and I had Seibon drill the holes for the STI spoiler. As well looks great and no complaints, wish I could say the same about my CF hood.Was this review helpful for you? YesNo
SEIBONŽ SS0607SBIMP-CW - CW-Style Carbon Fiber Side Skirts Reviews (1)All SEIBON Body Kits reviews >>