Dodge Durango 2WD 5.7L 2004-2006, Ceramic Coated Steel Performance Header by Gibson®. Let your engine breathe and gain power and performance with Gibson Ceramic Coated Steel Performance Headers. These headers will flow much more exhaust than your restrictive factory exhaust manifolds. The increased exhaust flow will result in more usable low end and mid-range horsepower and torque. They’re designed to directly replace your exhaust manifolds for easy, hassle-free bolt-on installation. They’re available in stainless steel, nickel chrome plated steel or ceramic coated steel.
Fitment Notes: Direct Fit - No Welding Required.
- Dyno tuned for maximum performance
- Improves exhaust flow
- Increases low and mid-range horsepower and torque
- Enables engine to run cooler for longer engine life
- Increases engine efficiency
- Direct replacement for factory exhaust manifolds
- Mandrel bent tubing
- Heavy gauge port flanges ensure a leak-free seal
- Constructed from ceramic coated steel
- Comes complete with everything required for easy installation
- 50 state legal; meets EPA and CARB requirements
- Will not affect factory warranty
- Backed by a lifetime limited warranty
- Proudly made in the USA
Your factory exhaust manifolds are very restrictive because more than one cylinder dumps exhaust into the same small space. You can improve exhaust flow and performance by replacing your exhaust manifolds with a set of Gibson Ceramic Coated Steel Performance Headers. These headers feature large diameter individual exhaust tubes that allow unrestricted exhaust flow from the cylinder head exhaust ports.
Gibson Ceramic Coated Steel Performance Headers are dyno tuned and engineered for each application, to deliver more usable horsepower and torque at low and mid-range rpm. Along with better breathing and more power, your engine will also run cooler with these headers, prolonging engine life. And your engine will be more efficient, so increased fuel economy is a possibility with restrained driving.
These headers are a quality product and built to last. The header tubes are CNC mandrel bent for consistent bends and to eliminate restriction. The port flange is laser cut from 3/8” material to prevent warpage and leaking. The headers are constructed from high temperature resistant ceramic coated steel tubing.
Installation is a bolt-on procedure because Gibson Ceramic Coated Steel Performance Headers are designed to directly replace your exhaust manifolds. They come with everything required for installation including premium gaskets and hardware. Air injection and oxygen sensor fittings are provided where required.
Gibson Ceramic Coated Steel Performance Headers are street legal in all 50 states and meet all EPA and CARB requirements. They will not affect your factory vehicle warranty. Gibson Performance Headers are manufactured in the USA, and Gibson backs these headers with a lifetime limited warranty.585.00Brand: Gibson Part Number: GP317S-C UPC: 677418014037
Gibson® Each product by Gibson Performance is designed for a hassle-free, bolt-on installation with professional looking design. All performance accessories are available in aluminized or stainless and are remarkably engineered to ignite the maximum performance of your engine. With the most comprehensive list of vehicle application, Gibson Performance strives to be on the top of the exhaust scene with headers and cat-back exhaust systems for various cars, trucks and SUVs. All Gibson's accessories are 50-state emissions legal and do not affect the factory warranty.Gibson® - Ceramic Coated Steel Performance Header Reviews (5)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Customers' rating: 4 OF 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYDakota and the Cat-Back Exhaust System| Posted by George D. | 2004 Dodge Dakota (Biloxi, MS)
I purchased this system to enhance the look of my 04 Dodge Dakota (age 64), I didn't dare try to install myself. I was very satisfied after the installation by Meineke mufflers, so I do not know how easy it was to install, although the installer said it was a piece of cake to install. The installation cost was around a hundred bucks. It was worth it to me. It looks great! The throaty sound is very nice, but on a long trip it may wear on me and my age. For a younger man, it would be great. I feel the cost of the system is a little pricy, but with the warranty, I guess it's worth it.Was this review helpful for you? YesNo(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYGibson Single Side for Ram 2500 Mega Cab| Posted by Standford S. | 2012 Dodge Ram (Selma, TX)
It didn't take long to hook up, but there really doesn't seem to be a difference in the exhaust tone until your above 2k-2.5k RPM's, basically when you gun it off the line. The exhaust tip pipe section hits the heat shield for the spare tire, and the chrome tip itself taps on the rear quarter panel when you hit small bumps in the road. I've tried to get a little more space between the tip and the quarter panel, but to no avail. I will have to work on it some more. It does look great on the truck, however, function is more important to me than looks.Was this review helpful for you? YesNo(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYNew Cat Back System| Posted by John R. | 2006 Dodge Ram (Burien, WA)
I was able to install the system I bought with a few modifications, requiring some use of a saws all and some additional hangars. Once it was all done, took about 1-1/2 hours; it all turned out OK. Sounds great and has improved get up and go.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2004 Dodge Dakota Gibson Header| Posted by Jared T. | 2004 Dodge Dakota (Oak Harbor, WA)
The installation was pretty easy. Although I suggest you make sure you know which bolts you can get to easily, and plan accordingly. I've already noticed an improvement in gas mileage. And the performance is unbelievable. Can't wait to see how my truck does with the new cat-back exhaust I'm about to put in.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYHeader Install| Posted by Thomas D. | 2005 Dodge Dakota (Groton, NY)
The headers look great and went in as easily as you could expect. Some friends and i put them in my Dakota in about 3 hrs. The included hardware was beefier than the stock stuff and the directions were great.Was this review helpful for you? YesNo
Gibson® - Ceramic Coated Steel Performance Header Reviews (5)All Gibson Exhaust Systems reviews >>