- Product Details
-
Dodge Magnum 2005-2008, Polished SS Coolant and Power Steering Fluid Reservoirs Cover by ACC®. This cover is just the thing to customize your engine compartment and give it a "clean" look. The factory coolant and power steering fluid reservoirs are ugly. With this stainless cover you won't have to look them anymore, but you'll still have access because it has holes for both reservoir caps. This cover is laser cut from premium grade stainless steel and polished to a mirror-like finish. Everything necessary for installation is included.
Features:
- Custom designed
- Made from the finest grade 304 stainless steel
- Precision cut using high-tech computer guided lasers
- Hand-formed by experienced craftsmen
- Highly polished or brushed finish
- Most parts easily installed using 3M™ double-sided tape
- Includes comprehensive installation instructions
- Backed by a Limited Lifetime Warranty; guaranteed to never rust or corrode
There are many ways you can modify the appearance of your engine and engine compartment; a performance intake system, colored spark plug wires, even braided steel hoses. But there’s nothing you can buy that combines appearance, shine, quality and value like real stainless steel. Stainless steel has the look and texture that other materials just can’t match. And for the finest stainless steel engine products, look no further than American Car Craft. American Car Craft has over 20 years experience creating innovative custom stainless steel design concepts.
American Car Craft doesn’t make a few products and then try to get them to fit on many different vehicles, they custom design each product for the specific application. Then, their experienced craftsmen use the finest quality 304 stainless steel to bring the design to realization. Each part is laser cut and hand-formed to ensure a precise fit and perfect appearance. The desired texture is then painstakingly applied, whether it’s brushed to a high sheen or polished to a mirror-like gloss.
Most American Car Craft stainless steel products are easily installed with 3M™ adhesive. Simply prep the area according to the furnished instructions, peel the backing from the automotive-grade 3M™ double-sided tape, and press the part into position. Parts not installed with adhesive come with all hardware and everything necessary for installation. And your stainless steel part is guaranteed to never tarnish, rust or pit.
American Car Craft® is a company with more then thirty years of experience in customization of classic cars, hot rods, limousines and exotic cars and exclusive approach to car customization. The accessories are produced from high grade, flat 304 stainless steel by laser cutting and then are 3D formed as needed. The company offers premium class grills, engine bay customization accessories, interior and exterior trim with precise and impressive digital graphics. The most successful works of American Car Craft were covered in various magazines like Vette Magazine, Corvette Fever, Hot Rod, Cruisin' News, etc.
ACC® - Polished SS Coolant and Power Steering Fluid Reservoirs Cover (10 latest reviews)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for the purchased product, please follow the link in the email message that you will receive after completing the purchase. You can rate appearance, ease of installation, price/value and product quality.
Customers' rating: 
Appearance 
Ease of Installation 
Price/Value 
Quality View next 10 All American Car Craft Chrome Accessories reviews >>ACC - Polished SS HEMI Fuel Rail CoversPosted on 03/06/12 Len S. - 2009 Dodge Challenger (Highlands Ranch, CO)Appearance Ease of Installation 
Price/Value Quality "Easy to install. Right/Passenger side required adjustment to fit correctly. Two small front plates were different sizes. I assumed they would look odd. I cut the larger one the shape of the smaller before installation. Looks Great, especially the carbon fiber logo!"
Was this review helpful?
ACC - Polished SS Fuse Box CoverPosted on 03/06/12 Len S. - 2009 Dodge Challenger (Highlands Ranch, CO)Appearance Ease of Installation Price/Value Quality "Very easy to install. The small cable running along the side of the fender interferes with fit a little. I drilled and reamed a hole, then cut material to form a pass through slot on the fender side edge. Next I cleaned up and painted the underside to correct a sloppy adhesive assembly that reflected in the anti lock brake cover."
Was this review helpful?ACC - Polished SS Anti Lock Brake CoverPosted on 03/06/12 Len S. - 2009 Dodge Challenger (Highlands Ranch, CO)Appearance Ease of Installation Price/Value Quality "Very easy to install. A must piece with the fuse box cover to balance with the coolant/power steering cover on the driver side. I dont like the slots on the side for brake line clearance. Cover should be redesigned to completely cover all the brake lines. Still it's low and not too noticeable."
Was this review helpful?ACC - SS Coolant/Power Steering CoversPosted on 03/06/12 Len S. - 2009 Dodge Challenger (Highlands Ranch, CO)Appearance Ease of Installation Price/Value Quality "Very nice piece! To achieve correct fit and bolt hole alignment, I had to widen the slot for my Mopar cold air intake. I also slipped a .080 SS washer under the cover at the bolt hole location and installed an SS screw. Thus, discarding the small bolt cap and enabling ease of removal and reinstallation if needed without fear of damaging the cover. I'm disappointed I wont be able to install am SS Hood Panel because the coolant cap comes in contact with the factory hood insulation."
Was this review helpful?Shock Tower Dome CoversPosted on 04/22/12 Michael K. - 2009 Dodge Challenger (Dallas, NC)Appearance 
Ease of Installation 
Price/Value Quality "Quality is outstanding, and they look great. One went on like a dream, the other needed adjustments to the clips."
Was this review helpful?2010 Dodge ChallengerPosted on 04/22/12
Jennifer D. - 2009 Dodge Challenger (Sinking Spring, PA)Appearance Ease of Installation Price/Value Quality "Polished SS Vented Hood Panel made a huge difference in the appearance."
Was this review helpful?Yes, It's a HEMI!Posted on 04/22/12
Joseph H. - 2011 Dodge Challenger (Douglasville, GA)Appearance Ease of Installation Price/Value Quality "Fit and Finish is outstanding. Installation was a snap and the comments from friends all favorable."
Was this review helpful?2010 Dodge Challenger R/TPosted on 04/22/12 Jennifer D. - 2010 Dodge Challenger (Sinking Spring, PA)Appearance Ease of Installation Price/Value Quality " Looks great but does not completely cover all sides."
Was this review helpful?Polished SS Collant and PS CoverPosted on 05/08/12 John R. - 2006 Dodge Charger (Tucson, AZ)Appearance Ease of Installation Price/Value Quality "Shipped quickly, installed easily and looks good. It is one of my many new under hood dress up mods I will be doing. Quality it great. Looks good on my 2006 charger SRT."
Was this review helpful?Polished SS Hemi Fule Rail CoversPosted on 05/09/12 Larry F. - 2010 Dodge Challenger (Leesville, SC)Appearance Ease of Installation Price/Value Quality "Looks great on car, very easy to install."
Was this review helpful? - More Accessories
- Product Reviews
-
ACC® - Polished SS Coolant and Power Steering Fluid Reservoirs Cover (11 reviews)View more 10 All American Car Craft Chrome Accessories reviews >>
Contact Us
CARiD.com · Eight-A Corporate Center · 1 Corporate Drive · Cranbury · New Jersey · 08512 · USAToll Free: 800.505.3274 · International: 609.642.4700 · Fax: 609.964.1983
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
Copyright © 2003-2012 CARiD.com. All rights reserved.
About Us - Secure Shopping - Return Policy - Price Match - Affiliate Program - Coupon Codes - Help Zone - Contact Us