Chevy Uplander 2005-2009, UNI I Series Running Boards by ATS®. This 6-inch extra wide running board comes with a uniform black thermal plastic finish and offers the option of lights that operate when any vehicle door is opened. An underlying frame constructed of aircraft grade aluminum ensures light weight and prevents corrosion. Brackets needed for installation are sold separately and some drilling may be required depending on vehicle model.
- Available with or without lights that operate when vehicle doors are open
- 1-piece black thermal plastic section covers all visible surfaces and aligns flush with your vehicle’s edge
- 6-inch flat step area
- Frame is crafted from aircraft-grade aluminum
- Some drilling may be required depending on vehicle application
- Brackets required for mounting are sold separately
- Available in multiple lengths to fit any vehicle
- 3-year manufacturer warranty
- Proudly manufactured in the United States
ATS Design Uni I series running boards offer the option of built-in lights on running board surfaces that illuminate when any vehicle door is opened. A 6-inch wide flat step gives maximum levels of safe grip, and aluminum frame construction ensures corrosion-free strength. Once you experience the 5-star welcome and safety levels these running boards provide, you’ll never want another vehicle without them. On most makes and models, no drilling is required for installation. However, a small amount of drilling may be required to install the mounting brackets (sold separately) on some trucks. ATS offers a 3-year warranty against defects.
ATS Design is highly focused on the quality of its products and the satisfaction of its customers. When it comes to metal, ATS Design uses only the highest grade of T-6 aluminum favored by aircraft manufacturers. Before running boards are crafted into shape, engineers relentlessly check all tooling and dies that are used to make sure they have no flaws and are in top condition. Additionally, the quality of all raw materials is checked for consistency. Once the running board is crafted into shape, all areas are checked for dimensional accuracy, proper contour, and good surface quality before any final finish is applied. Then, the thickness of the finish is checked for evenness and color accuracy. It is only after passing these stringent tests that your running board is boxed and shipped to you.248.11 268.80
Brand: ATS Part Numbers:
Founded in 1971 and based out of Cerritos, California, ATS Design got its start in the automotive accessory business with a line of rear spoiler wings that replicated OEM equipment on vehicles of the day. Soon, they branched into their own designs which were designed for fitment on any vehicle. ATS’s in-house engineering and production facilities allowed quick development of new products and fast shipping times, and their focus on customer service and quality control soon led to many repeat customers that were happy to provide good word-of-mouth. Over the years, the company expanded their facilities to include production of running boards, fender flares, and valance panels. Even though the company has grown to over 200 employees and occupies a 50,000 square foot facility today, their motto still remains “Your order is completed on time, every time, defect free".Product Reviews (7)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.ATS® - UNI I Series Running BoardsAverage Rating: 4.5 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYAll ATS Reviews(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2007 Dodge Ram | Posted by John | (Louisburg, NC)
Product looks great on my Ram 1500 P/U. Really dresses it up.Was this review helpful for you? YesNoShare this review:(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2006 Ford Expedition | Posted by Scott | (Florence, KY)
Just like factory.Was this review helpful for you? YesNoShare this review:(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2009 Dodge Ram | Posted by Glenn | (Plano, TX)
Quality was good, appearance is as shown and described. The only small down side is the instructions that come with the install kit (not included with running boards). Some of the illustrations require some deduction and while a number of washers was included, the instructions never referenced them as to where to use them.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 GMC Canyon | Posted by Bruce W | (Kennewick, WA)
Like the look. Really touches up the appearance of the vehicle. The lighted running boards help my mom in the dark. BruceWas this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2007 Toyota Sequoia | Posted by Hugo | (Dayton, NV)
Running boards look very nice on my Sequoia.Was this review helpful for you? YesNoShare this review:(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2012 Nissan Titan | Posted by Tomasz | (Las Vegas, NV)
In general, running boards met my expectations. My problems experienced during installation were with quality of instructions and the use of tap screws provided with installation kit. I had to use online video to understand installation process. As a self-drilling tap screws go, I had to replace them with regular metal sheet screws. After applying 1st self-drilling screw, I faced over drilled situation. It could be attributed to lack of skills, but I did not think it was the case. I successfully completed installation with regular metal sheet screws. My suggestion would be to prepare better installation instructions and replace self-drilling screws with regular screws or custom screws that secure better grip on metal under body of the car. I think pre-drilling small pilot hole 1/8â€ followed by #14 metal sheet screws is much better and more reliable solution. Another thing, I would recommend to the installer to drill screw holes ¼ â€œ from the top of pinch weld of the vehicle. It will guarantee stronger attachment of the bracket and locks hex head of screws against body fold above. It will make installation easier. Screwing top screws of the bracket requires specialized angle drill due to difficult access restricted by the frame of the truck. Overall, it is good product.3 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2012 Dodge Journey | Posted by Annmarie | (Port Orange, FL)
Good quality, fit well on my vehicle. Should be a little wider, other than that, they are good.2 people found this review helpful.Was this review helpful for you? YesNoShare this review:
Product Reviews (7)
Product Reviews (7)
You will never pay more with CARiD! Not only will we match prices from any competitor's website or other reputable source, we will continue to honor that promise for up to one year after your purchase.
We'll match the price at time of purchase, or refund you the difference if done after the purchase. Either way, we are totally committed to providing you the best online shopping experience.
We're car and truck enthusiasts, just like you! And it's enthusiasts we hire in our Sales and Service Centers. Many of our staff are ASE certified and have spent years in the retail auto business.
We conduct our own in-house training, and we even bring vendors to us for hands-on product training demonstrations. You're getting true expertise when you phone or email us!
With hundreds of vendors, and tens of thousands of components for sale, we put tremendous effort into coordinating our data with our vendors' data in order to guarantee that you get the correct part.
Our huge database is regularly cross-checked to keep it current and optimized. At times, our thoroughness makes our data even more accurate than our suppliers! This rigorous process means that you can always order with confidence.