Duraflex® - TD3000 Style Fiberglass Rear Wing Spoiler (Unpainted)

Name: Duraflex® - TD3000 Style Fiberglass Rear Wing Spoiler (Unpainted)
Brand: Duraflex
SKU: mpn932775
Price: 135.15 USD
Availability: InStock
Rating: 4 (9 reviews)

9 reviews|Item # mpn932775|Similar Products

Duraflex® - TD3000 Style Fiberglass Rear Wing Spoiler Duraflex® - TD3000 Style Fiberglass Rear Wing Spoiler Duraflex® - TD3000 Style Fiberglass Rear Wing Spoiler Duraflex® - TD3000 Style Fiberglass Rear Wing Spoiler Duraflex® - TD3000 Style Fiberglass Rear Wing Spoiler Duraflex® - TD3000 Style Fiberglass Rear Wing Spoiler Duraflex Special Offers

Duraflex® - Basic Fiberglass Preparation Process Before Painting Information Duraflex® - FAQ Duraflex Authorized Dealer

$199.00Save: $63.85 (32%)

$135.15

In Stock (5) - Ships in 24 to 48 hrs

Vehicle Specific

Please Select Vehicle Below

Notes:

Does not come with the LED Light
Drilling is required

Authorized Dealer

Have a Question? Ask a Specialist

800.505.3274Live Chat

Vehicle Fitment

Make	Model	Year
Toyota	Celica	2000-2005

Product Details

TD3000 Style Rear Wing Spoiler by Duraflex®. Add style and performance to your car with this Wing. Its aggressive style will draw everyone's attention and it will add downforce at speed. Installation typically requires sanding, trimming, and filling prior to painting, thus, professional installation is recommended.

Notes

Does not come with the LED Light
Drilling is required

Specifications

Installation Type: Bolt-On

Material: Fiberglass Reinforced Plastic

Finish: Unpainted (Not primed)

Third Brake Light: Without

Quantity: 1 Piece

Features

Hand laid, high quality 6 oz. fiberglass
Helps to elevate your vehicle above the masses
Proprietary polymer blend for maximum flexibility and strength
Signature black finish
Reduced damage rate up to 75%
Brings the ultimate in style and performance
Provides unbeatable durability and long-lasting service life
Intended for off-road or show use only

When you spend big money for a spoiler, installation and paint, you have high expectations. You absolutely expect your vehicle to look great, but you also want that look to last. In order to get lasting good looks you have to start with a high-end quality Duraflex spoiler. Duraflex combines fiberglass, plastic and flex resins to manufacture unique parts that are stronger than regular fiberglass, which means that they will flex instead of crack and bend instead of break. Since Duraflex parts are more flexible compared to standard fiberglass components, they not only last longer, but also allow for much easier installation.

You won't realize the full benefits of Duraflex spoilers though, until you drive your vehicle. You'll enjoy the looks you get when everyone sees those smooth Duraflex curves, but you'll really love how durable your Duraflex panels are when backing out of a driveway or tapping a curb. You will also benefit from the materials unbeatable resistance to weather and chemical corrosion, which results in longer service life, ensuring your vehicle will look stunning for years to come. Give your valuable investment the style it deserves with the Duraflex spoiler!

Duraflex® is recognized as one of the premier aerodynamic body part manufacturers in the world. Since their inception in 2000, the company has been dedicated to quality, value and customer service, consistently exceeding industry standards. Today, Extreme Dimensions offers over 7,000 products in carbon fiber, polyurethane and fiberglass. The company employs over 300 people at their 100,000 square feet U.S. headquarters and 200,000 square feet overseas manufacturing facility. Manufacturing and distributing the most innovative and largest selection of aerodynamic products in the industry, Extreme Dimensions’ focus is always to meet the needs of the automotive and truck markets.

Brand:

Duraflex

Part Number:

100197

Alternate MPN:

100197

Warranty

All body kits and products sold by Duraflex are aftermarket products and are intended for off-road or show use only. The brand is not liable for any damages or injury as a result of the use of its products. Due to the material and processes used in production, products will not be a “direct bolt-on.” Duraflex products may need prepping, sanding, shaving, filling gaps, and/or other body work. Modifications may include removal of the reinforcement bars, bumpers, turn signals, and other safety equipment on the vehicle. Duraflex highly recommends that a professional “custom” shop with fiberglass body kit experience perform the installation. Auto shops experienced in OEM installations may not be experienced in aftermarket fiberglass installations. All products sold by Duraflex are for off-road and show purposes only. Due to strict regulations by the Department of Transportation, some of these products are not approved for street/highway use. The brand does not recommend, and in fact discourages, these parts to be used on public streets and highways.

LIMITED WARRANTY

Duraflex warrants its branded products to be free from manufacturing defects in workmanship and materials when used for their intended purposes. This warranty is non-transferable. Any part of a Duraflex product that is covered by this warranty and that is found in reasonable judgment to be defective in materials or workmanship will be replaced in full at the request of the customer. For example, Duraflex will not replace a complete body kit if a single component is found to be defective.ArrayThe following situations are not covered by warranty:ArrayAny Duraflex product that has been subject to misuse, neglect, accident; or that has been improperly installed.ArrayAny Duraflex product that has been modified or altered from its original manufactured state.

Hood and Trunk Fitment Guarantee

Duraflex stands behind the fitment of its products. Once your hood is installed, Duraflex will fully replace your hood if it does not fall within the following guidelines of the brand’s Fitment Guarantee.ArrayHood does not clear a stock engine.ArrayGaps between the hood and the fenders are more than 1/2″ wide on each side.ArrayHood levels more than 3/8″ higher or lower than the fenders.ArrayLatch is too long or too short compared to the stock latch, causing the hood not to latch after adjusting.ArrayDuraflex does not guarantee fitment on vehicles that have been involved in accidents and/or have had body damages or customization.ArrayHood pins are required.

Trunks

Gaps between the trunk and the rear fenders are more than 1/2″ wide on each side.ArrayTrunk levels more than 3/8″ higher or lower than the rear fenders.ArrayDuraflex does not guarantee fitment on vehicles that have been involved in accidents and/or had body damages or customization.Array

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(9)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Duraflex® - TD3000 Style Fiberglass Rear Wing Spoiler (Unpainted)

1-9 of 9 Reviews

Sort by

4 of 5

Just like the TRD Wing

Duraflex® - TD3000 Style Fiberglass Rear Wing (Unpainted)

It came in the mail earlier than I expected. It got a bit of cracks but nonetheless, it is just as great as the TRD wing. Better if the wing came with some gaskets to mount the wing on though.

Posted by Daniel (Napoleons, VI) / September 21, 20222000 Toyota Celica

4 of 5

Arrived Earlier than I Thought

Duraflex® - TD3000 Style Fiberglass Rear Wing (Unpainted)

Shipping time was quite quick. However, it would have been decent if the product came with gaskets.

Posted by Customer / September 16, 20222000 Toyota Celica

4 of 5

Impressed

Duraflex® - TD3000 Style Fiberglass Rear Wing (Unpainted)

This piece arrived with a body kit, and was by far the most robust, weighty, and well finished piece(s). It comes assembled, but was easily disassembled which eased in paint preparation. Overall the pieces required minor filling and sanding, and the fitment was not symmetrical at first. But overall I expected worse from fiberglass components at this price range, and was impressed by the weight, routing and dimensions for the price. Is an excellent alternative to the action package wing.

Posted by Dylan (Grand Junction, MI) / July 12, 20182000 Toyota Celica

3 of 5

Looks Good Bad Fitment

Duraflex® - TD3000 Style Fiberglass Rear Wing (Unpainted)

I had to order two of these due to its fitment issues. Requires a lot of drilling and filing and the bolts aren't that strong had to get aftermarket hardware for it. Must be installed in pieces. Instructions don't say that the sides separate from the middle.

Posted by Collin (Saylorsburg, PA) / January 05, 20172000 Toyota Celica

4 of 5

Celica Spoiler

Duraflex® - TD3000 Style Fiberglass Rear Wing (Unpainted)

Looks great easy to sand had some problems with the install the right base didn't sit evenly had to carefully screw down to get it to sit. For those that don't know already it doesn't use stock bolt holes.

Posted by Collin (Saylorsburg, PA) / November 22, 20162000 Toyota Celica

5 of 5

Trd Wing

This thing looks so bad @ss! All you got to do is paint it and put it on and bamm, your car looks like a lambo. They are very good quality and fairly easy to install will just need to drill four screws where the older wing was.

Posted by Joseph (Bakersfield, CA) / July 17, 20162002 Toyota Celica

4 of 5

Okay

Duraflex® - TD3000 Style Fiberglass Rear Wing (Unpainted)

Overall its a good product.

Posted by Edgar (Norcross, GA) / April 16, 20152000 Toyota Celica

3 of 5

Duraflex Spoiler

Duraflex® - TD3000 Style Fiberglass Rear Wing (Unpainted)

I guess for the price, it is what it is. Downside, they don't provide a template for you to make the drill holes or gaskets like if you bought from Toyota. Product a little flimsy when it got here. You have to tighten the screws (bolts), but not too tight, or the plastic will crack/break.

Posted by Tam (Lilburn, GA) / March 18, 20152001 Toyota Celica

5 of 5

Thanks And I'll Be Offering Again Soon

Duraflex® - TD3000 Style Fiberglass Rear Wing (Unpainted)

I'm happy with everything.

Posted by Lisa (Allentown, PA) / September 20, 20142000 Toyota Celica

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!