Mercury Marauder 2003-2004, OE Type Radiator Cap by Stant®. 16 psi Pressure Rating. Packaged in a Box. Test your radiator cap whenever you service the cooling system. If you’re in need of a replacement you can prevent engine overheating and expensive damage with a new Stant radiator cap. They’re made from premium materials to OE specifications.
- Meets Original Equipment specifications
- The SWIV-EL design allows the cap to be installed and removed much easier than conventional radiator caps
- Made from premium materials
- Designed to function on open cooling systems and overflow reservoir type systems
The radiator cap does far more than just cover the opening in the radiator. On modern vehicles the radiator cap pressurizes the cooling system to raise the boiling point of the coolant. The cap allows excess coolant to flow to the coolant expansion tank when the engine is hot, and back into the radiator when the engine cools. The cap should be inspected and tested every time the cooling system is serviced. Check the cap seals for cracks and other signs of damage, and pressure test the cap with a cooling system tester. A defective cap will not be able to maintain its rated pressure, allow the coolant to boil and cause the engine to overheat. A faulty cap may also not allow coolant to transfer back and forth between the expansion tank and the radiator.
When you need a new radiator cap, you can’t do better than a Stant. Stant is the world leader in the design and manufacture of cooling system components for the automotive aftermarket. The company offers an extensive range of cap styles for domestic and imported cars, light trucks, heavy-duty trucks, racing, off-road, and agricultural equipment.
Stant standard original equipment type caps have a SWIV-EL design that makes removal and installation easier. They’re made from premium materials, meet all original equipment specifications, and are designed for use on open cooling systems and overflow reservoir type systems. The patented Lev-R-Vent radiator cap features a lever that allows pressure to safely be released before the cap is removed, to prevent injury. The Lev-R-Vent cap is also made from premium materials, meets all original equipment specifications, and is designed for use on open cooling systems and overflow reservoir type systems.
Stant has an extensive line of high and low pressure racing radiator caps specially designed to meet the extreme demands of racing engines. Low pressure caps are made from higher quality materials and to closer tolerances than standard caps and are available in 13 or 16 pound ratings. High pressure caps are available for open and closed cooling systems in pressure ratings from 19-32 pounds. Stant vented radiator caps have a small disc at the bottom of the cap that is a vacuum valve. The vacuum valve hangs down in the open position until the cap is exposed to the rapid expansion of coolant or steam, which closes the valve in the sealed position. This pressurizes the system, helps control overheating, and enhances cooling system efficiency.5.22Brand: Stant Part Number: 10238 This part is compatible with 456 vehicle(s)
Stant is a world leader in the development and manufacture of fuel and cooling system products. Founded in Connersville, Indiana by George Stant in 1898, today the company is still based in Connersville, but is now owned by HIG Capital LLC. Stant designs and produces a variety of consumer products including thermostats, radiator and coolant reservoir caps, original equipment style and locking fuel caps, oil fill caps, pressure testers and adapters, and fuel cap testers and adapters. Stant also offers products for heavy-duty vehicles, and farm and construction equipment, and makes parts for vehicle and equipment manufacturers. The company’s extensive background in the research and development of cooling and fuel management systems and expertise in designing steel, molded plastic, and rubber components, along with its ability to build assembly and testing equipment in-house enables Stant to move products seamlessly from concept to production. The majority of Stant consumer products are manufactured in the USA in TS16949/ISO14001 certified facilities.
Product Reviews (0)
Product Reviews (0)
You will never pay more with CARiD! Not only will we match prices from any competitor's website or other reputable source, we will continue to honor that promise for up to one year after your purchase.
We'll match the price at time of purchase, or refund you the difference if done after the purchase. Either way, we are totally committed to providing you the best online shopping experience.
We're car and truck enthusiasts, just like you! And it's enthusiasts we hire in our Sales and Service Centers. Many of our staff are ASE certified and have spent years in the retail auto business.
We conduct our own in-house training, and we even bring vendors to us for hands-on product training demonstrations. You're getting true expertise when you phone or email us!
With hundreds of vendors, and tens of thousands of components for sale, we put tremendous effort into coordinating our data with our vendors' data in order to guarantee that you get the correct part.
Our huge database is regularly cross-checked to keep it current and optimized. At times, our thoroughness makes our data even more accurate than our suppliers! This rigorous process means that you can always order with confidence.