- Developed for extreme off-roading and rock crawling
- Upturned and relieved bumper ends protect bodywork while providing ground clearance needed for steep approach angles
- Manufactured from 3/16" laser cut steel
- E-Coat and wrinkle-finish powdercoat for ultimate appearance and resistance to corrosion
- Available in matte or satin black finish
- No-drill installation
- On JK Wranglers (2007-2013) includes cutouts and brackets to mount factory fog lights
- Pre-punched holes to mount most popular brand winches
- Includes sturdy winch and fairlead attachment plate
- 1" thick D-Ring attachment ears extend through bumper, are fully MIG welded on front and inside of bumper
- Optional Grill Guard in black or stainless protects grille and headlights and features 2 light tabs
- Optional Approach Roller helps ease bumper over the toughest obstacles
- Optional D-Rings mount to D-Ring attachment ears and provide an attachment point in case you get stuck or need to extract someone else
- Comes with installation instructions
- Limited 1-year warranty
Your factory bumper may meet all the government highway regulations, but it's woefully inadequate for heavy-duty trail use. Forget about climbing over any obstacles, that low hanging bumper will only hit and dig in before you can get any traction, and don't even think about mounting any accessories. For extreme off-roading and rock crawling, where the steepest approach angles are encountered, you need the Bestop HighRock 4x4 High-Access Front Bumper. With this bumper, you'll have the most ground clearance you can get, while still providing protection for your bodywork. The bumper ends are not only upturned, but also cutout on the underside to provide this exceptional degree of ground clearance.
The HighRock 4x4 High-Access is manufactured from heavy-duty 3/16" laser cut steel so it can handle any kind of abuse. To make sure it stays looking good for years to come, it's first given an E-Coat, a primer coating that's electrically applied so it bonds to the metal, and then has a wrinkle-finish powdercoat applied in your choice of matte or satin black. For JK Wranglers with factory fog lights, the bumper is cutout and brackets are included to mount the fog lights in the HighRock bumper. Pre-punched holes make it easy to install most popular Warn®, Mile-Marker®, and Superwinch® brand winches, and the included winch and fairlead plate accommodates most standard size winches and provides a convenient mounting point for a fairlead. To make sure you have strong anchoring points, the D-Ring attachment ears extend through the bumper, and are MIG welded both in front and back of the bumper. Complete instructions are included for an easy installation that requires no drilling.
An optional Tubular Grill Guard is available to protect the grill and headlights. It comes in your choice of matte black or satin black powdercoat or stainless steel. There are 2 tabs welded to the Grill Guard to mount off-road lights. The optional Approach Roller is mounted in roller bearings so it rolls freely. Instead of scraping and dragging when you encounter an obstacle, creating friction, with the Approach Roller you'll glide right over the toughest obstacles. Optional D-Rings can be attached to the bumper D-Ring attachments for sturdy and convenient recovery gear attachment points.
The HighRock 4x4 High-Access Front Bumper is backed by a limited 1-year warranty against defects in materials and workmanship.430.12Brand: Bestop Part Number: 42917-01 UPC: 077848052324 This part is compatible with 10 vehicle(s)
Bestop® has its origins in Boulder, Colorado in the early 1950s, where founder Thomas Bradley first began manufacturing soft tops for Jeeps during slow periods at his auto upholstery shop. From such humble beginnings Bestop has grown to become the world's largest soft top maker, producing almost 200,000 tops each year, as well as a factory original supplier of soft tops to Chrysler, Suzuki, Isuzu, GM, and Toyota. In fact, Bestop has been the original equipment manufacturer of all Jeep soft tops since 1986. Along with soft tops Bestop is a leading provider of Jeep and truck accessories like bumpers for rock crawling enthusiasts, electrically powered running boards, retractable bed steps, seats, floor liners, and vehicle storage and cargo carrying accessories. Bestop combines the expertise that comes from almost 60 years' experience with cutting edge and innovative design and engineering, and manufacturing that meets or exceeds OEM quality standards, to create the finest Jeep and truck accessories available.
Product Reviews (0)
Product Reviews (0)
You will never pay more with CARiD! Not only will we match prices from any competitor's website or other reputable source, we will continue to honor that promise for up to one year after your purchase.
We'll match the price at time of purchase, or refund you the difference if done after the purchase. Either way, we are totally committed to providing you the best online shopping experience.
We're car and truck enthusiasts, just like you! And it's enthusiasts we hire in our Sales and Service Centers. Many of our staff are ASE certified and have spent years in the retail auto business.
We conduct our own in-house training, and we even bring vendors to us for hands-on product training demonstrations. You're getting true expertise when you phone or email us!
With hundreds of vendors, and tens of thousands of components for sale, we put tremendous effort into coordinating our data with our vendors' data in order to guarantee that you get the correct part.
Our huge database is regularly cross-checked to keep it current and optimized. At times, our thoroughness makes our data even more accurate than our suppliers! This rigorous process means that you can always order with confidence.