Toyota Tacoma 1995-2004, Red LED 3rd Brake Light by Spyder®, 1-Piece. Add some custom detail to your vehicle and increase your driving safety at the same time with this eye-catching LED 3rd Brake Light. LED lights have a much more distinctive look and increased brightness compared with incandescent bulbs, and they illuminate faster as well. Designed to be a direct bolt-on replacement, this light meets all federal regulations for highway use.
3rd Brake Lights, also known as the Center High Mounted Stop Lamp (CHMSL) are positioned high on the vehicle to attract attention, alerting drivers behind you when you’re braking. But if your 3rd brake has incandescent bulbs your CHMSL can be improved. LEDs are particularly suited to 3rd brake light applications. Their small compact size makes them easy to group together, and when assembled in this manner, are more luminous than comparable incandescent bulbs; the brighter the light the more visible your vehicle becomes. And they rise to full intensity approximately 200 milliseconds (0.2 seconds) faster than incandescent bulbs, or about 10 times faster. This may not sound like a lot, but it may be all the time that’s needed for the driver behind you to see your brake lights and react to avoid a potential accident.
Bright LED lights will make your vehicle more conspicuous.
Unique, custom styling
Creative alternative to boring stock appearance.
Direct bolt-on replacement
Designed to be an exact replacement for your factory light, however some electrical wiring work may be required; most lights come with detailed installation instructions.
Thoroughly tested to ensure operation and completely sealed to prevent moisture from being trapped inside.
Meets all quality and legal standards
Meets ISO 9000 and 9002 quality standards. Approved by the SAE. Meets DOT regulations and compliant with FMVSS 108.
As if the safety factor wasn’t enough, these LEDs are housed in an attractive housing that will make a stylish upgrade to your vehicle’s appearance. And those LED lights are extremely durable, with an average lifespan of 50,000-75,000 hours, which means you can forget about ever having to replace them. LEDs are also extremely vibration resistant, an ideal quality for a light mounted on a motor vehicle.
Every Spyder light undergoes a rigorous testing and quality control process before it leaves the factory. All wiring is tested to make sure the light is completely functional, and the housing is sealed with high quality silicone to ensure that no moisture can become trapped inside. Spyder lights are approved by the Society of Automotive Engineers (SAE), and ISO-9000 and ISO-9002 certified. They meet all U.S. Department of Transportation (DOT) regulations, and are compliant with Federal Motor Vehicle Safety Standard (FMVSS) 108. Most Spyder fog lights come with comprehensive instructions to guide you through the installation, which includes detailed wiring information where applicable. They’re backed by a limited 90-day warranty against defects in materials and workmanship.54.40Brand: Spyder Part Number: BL-CL-TTA95-LED-RD UPC: 847245023544
Spyder Auto® is an automotive styling and performance accessories supplier based in City of Industry, California. The company has been serving the automotive industry for nearly a decade, during which time they have consistently outpaced the competition by offering products with cutting edge design and class leading performance, manufactured to the highest quality standards. Their performance lighting provides unparalleled styling with the latest performance advancements including projector beams, LEDs, and Halos, and they also offer an extensive selection of conventional and OE style lighting. From stock replacement to the most elaborate custom creation, all are price competitive with OEM light units, making Spyder the affordable alternative that delivers more style, performance, and quality while leaving more cash in your pocket.Spyder® - Red LED 3rd Brake Light Reviews (10)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Customers' rating: 4.5 OF 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYGreat Product, Clean Look| Posted by Robert S. | 2003 Toyota Tacoma (Williamsburg, VA)
Installation was simple, back out four screws, unplug, plug in new assembly and screw back in. Comes with bulb for turn signals but not bulbs for reverse lights which was not good cause OEM assembly uses halogen bulbs and these use standard bulbs.Was this review helpful for you? YesNo(3.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYFancy Tail....| Posted by Jeffrey D. | 2013 Toyota Tacoma (Felton, DE)
Sharp looking tail light; I could not install them myself. I had a local car shop rewire the tail light so it could plug into the wire harness on the truck...it would have been nice to see them shipped here with the correct wire harness so I could have done it myself. Plug & play.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(3.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYSpyder Black Euro Tail Lughts| Posted by Jed T. | 2001 Toyota Tacoma (Tyler, TX)
Put these on my 2001 Toyota Tacoma. All in all good product for the price. Only thing I did not like was the reflectors on the top of the tail lights. Showed through more than the pictures LED on. And be very careful tightening these on because they crack very easily.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY01 Euro Tail Lights..| Posted by Nickolas S. | 2001 Toyota Tacoma (Fort Myers, FL)
Product looked liked i hoped and was easy to install, however the install didn't not say that i was going to have different light bulbs, 2 out of the 3 matched the reverse light in my OE didn't not match up with the new product, but it was an easy fix with a simple switch of buying the right light to put in so i had to drive around for a couple days with no brake lights .. o-well.. they looked good. :) .Was this review helpful for you? YesNo(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYRed led third brake light for 2001 Toyot| Posted by Bobby M. | 2001 Toyota Tacoma (Middlesboro, KY)
First of all (dont do it) the original light took about two hours to remove and had to litterly cut it off. When installing the led light back on you have to cut the wires and splice them on to the oe. Carid was great to send the light fast service, but to install it was a headache.Was this review helpful for you? YesNo
Spyder® - Red LED 3rd Brake Light Reviews (10)View more 10 All Spyder Tail Lights reviews >>