BREMBO® - Sport Drilled Rotors

Subaru WRX 2002, Sport Drilled Rotors by Brembo®. These are OEM-sized rotors with drilled holes that provide the best venting of heat while also effectively removing brake dust, gasses, and water. High-carbon iron resists heat, warping, and hairline cracks between holes and delivers superior stopping power. Pillared center posts provide faster cool-off.

Features:

• Available in sets for front and rear
• Sport series signifies identical sizing to OEM rotors for easy, bolt-on replacement without any need for modifications
• Drilled holes provide better venting of heat, brake dust, gasses, and they effectively remove water off rotor surfaces
• Rotors cool 20% faster due to center vent areas that contain spaced pillars instead of straight slats
• Rotors are crafted from iron with high carbon content which achieves reduced vibration and squealing noise
• Rotors provide a higher grip coefficient and slower wear rate
• Rotors are more resistant to heating up and becoming warped
• Lower operating temperatures greatly reduce fade that results from brake fluid reaching boiling temperature in the lines
• Brake pad life is typically extended by 20% due to these rotors maintaining a smoother, more even surface
• Rotors are zinc plated for corrosion protection on all non-contact areas
• 2-year manufacturer limited warranty

Brembo Sport Drilled Rotors are created for use with your original equipment brake calipers, and will bolt on easily without the need for modifications of any sort. Without replacing any other components, you'll enjoy a higher level of braking power that is progressive and easy to use around town. You will also find cross-drilled holes boost braking performance in the rain and at higher speeds when temperatures increase. Plus, their iron content formulated with a high amount of carbon allows these rotors to vibrate and squeal less, making them quieter and more pleasing to use. Their construction gives them a longer lifespan because of a slower wear rate, and because of features that allow them to run at lower temperatures while getting rid of heat faster.

The high-carbon iron resists temperature buildup better initially, and vented centers with a patented design disperse the heat in a superior fashion. Instead of straight fins between both rotor sides, Brembo rotors contain spaced pillars which result in more metal contact. Tests show these pillars allow the rotors to cool from 1,200 degrees Fahrenheit to 212 degrees 20 percent faster - virtually eliminating the likelihood of cracks forming between drilled holes. And during extreme heat-up tests with 100 sustained, hard braking applications, Brembo drilled rotors also developed far fewer cracks between holes than most competitors. The few hairline cracks that did develop were only 8 millimeters in length on Brembo rotors, compared to 32 millimeters typically found on other brands. Further wear tests of those rotors showed the much smaller Brembo cracks led to brake pad wear that was 20 percent longer. Brembo warrants to the original user that these brake discs are free from defects in materials and workmanship for a period of 2 years from the date of purchase.