- Product Details
Ford Mustang 4.6L F/I 1996-2002, 63 Series Aircharger Intake Kit by K&N®. Increased airflow and air volume into your engine results in more horsepower and torque, and better acceleration you can feel. This air intake kit is designed to maximize airflow and engine performance. It replaces your OEM air intake system with a free flowing K&N air filter and custom designed air intake tube. Street legal in most States. Estimated Horsepower Gain: 4.46 HP - 4216 RPM.
- Guaranteed to increase horsepower and improve acceleration
- Custom designed and engineered for each application
- Works with OEM computer system
- Includes the world's best air filter, the K&N filter
- Easy to install
- Street legal in most States
- Up to 100,000 miles between servicing
- Million Mile limited warranty
There are two problems with your OEM air induction system that cause restriction and reduce airflow. First, airflow is restricted by the size of the filter in the factory airbox. Even a replacement performance air filter can only flow so much when its size is limited. Second, the air path from the filter to the throttle body can be restricted by the OEM intake tube. Together, these two areas of restriction combine to reduce airflow and rob horsepower from your engine.
Luckily, these problems are easily solved with a K&N 63 Series Aircharger Intake Kit. K&N starts by replacing the restrictive airbox and small air filter with the largest size conical shaped high flow K&N air filter that will fit in the engine compartment. The great increase in filter area over stock vastly improves airflow and the capacity to capture and hold dirt. Then K&N replaces the OEM intake tube with a precision designed, rotationally molded tube made from interlaced high density Polyethylene. This tube eliminates air path restrictions to the engine and reduces air intake temperature when compared to similar metal tubes. Intake air temperature is further reduced by a heat shield that isolates the filter from the engine compartment. The reduction in air intake temperatures results in a cooler, denser air intake charge and even more horsepower. All components are mounted and connected with high quality materials such as steel, aluminum, silicon or reinforced nylon, to ensure long life.
K&N uses a dynamometer to design its air intake kits to make the most horsepower possible. But their power figures aren't based on just one vehicle, but rather an average of runs by a number of vehicles. This means repeatable numbers and horsepower claims you can count on.
Every 63 Series Aircharger Intake Kit comes complete with everything necessary for installation, including comprehensive installation instructions. The K&N filter can go up to 100,000 miles before cleaning is required. And the K&N air filter is guaranteed for one million miles.163.10
Brand: K&N Part Numbers:
K&NŽ is the inventor and leading innovator of reusable cotton gauze filter technology for automotive applications. The first K&N filter was conceived for racing over 40 years ago and a performance enthusiast mindset continues today throughout all levels of the company. K&N is the sales and brand leader for performance filters, including an extensive line of factory replacement filters and performance air intake kits. The company actively promotes the environmental, economical and performance advantages of long-life reusable cotton gauze filters.K&NŽ - 63 Series Aircharger Intake Kit Reviews (10)Customers' rating: 4.5 OF 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYGood| Posted by Christine L. | 2012 Ford F-150 (Perth, WA)
The product works good. Installed easy, with good instructions. Disappointed with K&N sending out a product with plastic screw in breather pipes adapters. I replaced them with brass fittings from the local Auto shop. Also, the thread where the fittings go, had excess chrome. Paul, Australia.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYExcellent| Posted by Marcos M. | 2013 Ford Edge (Elmhurst, NY)
It was very easy to install, nice sound under the hood. But still not seen difference with the gas, I think I'm using more gas with the air intake than without this well. I've to be checking all the time with this but looks like gas is going away faster than before... the performance is awesome.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Ford Edge Cold Air Intake System| Posted by Ronald B. | 2013 Ford Edge (Clarksville, TN)
The instructions were too the tee, everything matched and everything fit perfect. No problems at all, so if u have a 2011-2013 Ford Edge, this product will fit perfect, and it only took me and my dad about 45 mins to install all hoses and mass air flow and nipples. Everything fit perfect and the car gas mileage went up 4.6 more miles a gallon and sound like a beast when I get on it. So, if you're looking for a cold air intake, this is the one you need. It's the K&N filter 77 series.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYEasy & Effective| Posted by Seth P. | 2001 Ford Expedition (Williston, ND)
My friends and I use K&N on all our vehicles and I don't think any of us have anything bad to say about them. A couple tools, 1/2 hour of time the old one is out, new one is in. Ordered this from another website. Waited on them for 3 weeks without hearing anything from them. Called them and they said it was on back order and probably would be another month. Canceled that order, ordered it on CARiD and it was at my house less than a week later.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYK&N Intake - Ford Edge 2008 Limited| Posted by Karen H. | 2008 Ford Edge (Centennial, CO)
I recently installed this on my Ford Edge and what a difference it makes. I currently get .5 more MPG but I have only had it on a week so I will have to monitor it as time goes on. It adds pep to the car and adds a nice sound under the hood. The only negative comment I have is the painting on the intake was inside some of the screw holes and we had to "re-thread" the hole to finish the set-up so they could have been a little more careful with the spaying of the solver paint, but overall, it adds some nice eye candy under the hood. Other than that one issue, the install went very well.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY57 Series Generation Air Intake Kit (3.0)| Posted by Danny V. | 2004 Ford Ranger (Commerce, TX)
The Intake system you sold me works great. It has given my truck more pep and when I push on the footfeed, I not only can feel more power, but I can here it as well. Now I need some tuned header's and some dual exhaust and I'll be set. But right now, I would like to have some Chrome bed rails. DannyTVickWas this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY
- More Accessories
- Product Reviews
K&NŽ - 63 Series Aircharger Intake Kit Reviews (10)View more 10 All K&N Air Intakes reviews >>