EBC® - 3GD Series Drilled and Slotted Sport Rotors

Saab 9-3 1999-2002, 3GD Series Drilled and Slotted Sport Rotors by EBC®. These replacement rotors feature both slots and drilled dimples to provide the superior level of cooling needed for high performance street driving, trailer towing, 4x4 use, drifting, and short track runs. Anodized finish provides corrosion resistance on non-contact areas. Recommended for use with EBC Greenstuff 6000/7000, Yellowstuff, and Redstuff pads.

Notes: Available in full black only.

Features:

• EBC recommends use with Greenstuff 6000/7000, Yellowstuff, and Redstuff pads
• Angled slots on rotor surfaces allow superior expulsion of heat, water, brake dust, and friction gases
• Round indents in the rotors surface further increase cooling without the risk of cracking that drill-through holes pose
• Rotors feature either gold anodized finish or black anodized finish depending on vehicle make and model to provide corrosion protection for all non-contact areas
• Brake rotors are unidirectional to the left and right side of your vehicle to maximize effectiveness
• 3GD vented centers feature a wider aperture for air to pass between both rotor sides for superior cooling
• EBC recommends a 500 mile break in period with lighter braking application
• 6-month/3,000 mile manufacturer warranty against premature rotor wear under normal driving conditions

EBC pioneered brake rotors with dimple-drilled round indents decades ago to provide a solution to cracking problems that sometimes plague perforated rotors operating under high stress and heat conditions. What makes the 3GD Series Dimpled and Slotted Sport Rotors superior is the presence of both these dimpled indents and straight vent slots. Combined, they provide the superior expulsion of heat, water, brake dust, and friction gas that is needed to keep rotors cool and functional during street performance driving in any weather. Additionally, 3GD rotors feature a wider vented aperture for air to pass between both rotor sides, so metal expands evenly during use and the chance of warpage is minimized. 3GD rotors are designed for use with EBC Greenstuff 4x4 brake pads, Greenstuff 2000 compact car pads, Yellowstuff heavy duty 4x4 brake pads, and Yellowstuff / Redstuff pads created for shorter high performance street or track runs and drifting. 3GD brake rotors are anodized to prevent corrosion, and rotors should be fully ready for use after the first 500 miles of moderate brake application.

World-renowned brake experts at EBC have developed over a dozen variations of performance brake components, and each one is crafted to provide a superior level of grip, wear, and performance for uniquely different vehicle sizes, weights, and applications. When the company engineers who created pads that can survive 1,800 degree temperature test runs turn their attention to creating equally impressive brake rotors, you will see rotors finely tuned to deliver impressive looks behind your wheel spokes and last run performance that’s as equally impressive as your first. If you’ve been let down by underperforming brake rotors that didn’t last as long as they should, 3GD Series Dimpled and Slotted Sport Rotors are designed for the long run. If installed at the same time as a new set of EBC long life brake pads, it’s not uncommon for these rotors to last the length of the first set with more than enough life to be used with a second set. All EBC brake rotors are cast to a high metal strength rating of 150 newton meters and are precision CNC machined to be within tolerances of less than 0.05 millimeters. 3GD Series Dimpled and Slotted Sport Rotors are the result of relentless testing and refinement, and when better brake rotors are built it is EBC that will build them.