Jeep Wrangler 2001, 2" Coil Spring Spacer Kit by Rugged Ridge®. This is an economical way to give your Jeep a small lift, for a more aggressive look and to enable the fitment of up to 32" x 11.5" x 15" tires. These rugged and durable polyurethane spacers are used with your factory coil springs. The kit includes bump stop extenders and is available with or without shock absorbers.
- Easy economical way to gain a small suspension lift
- Enables the fitment of up to 32" x 11.5" x 15" tires
- Designed for on-road/light off-road use
- High-density polyurethane spacers
- Uses factory coil springs
- Stiffens ride
- Includes bump stop extenders to prevent over compression of coil springs
- Available with or without shock absorbers
- Shocks are nitrogen gas charged and feature automatically adjusting internal valving for a smooth ride
- Comes with installation instructions
- Backed by a 5-year limited warranty
If you're more interested in lifting your Jeep for looks or to enable the fitment of larger wheels and tires, up to a maximum of 32" x 11.5" x 15", and you rarely venture off-road, then this lift kit is for you. It includes rugged 2" high-density polyurethane spacers that install at the front and rear coil spring mounts and work with the factory coil springs. Once installed, your Jeep will be raised approximately 2", but you should be aware that the ride will be stiffer and they will provide very little articulation when off-road.
If you opt to include shocks with your kit, the ORV units are nitrogen gas charged to 150 psi for a better on and off-road ride. The internal valving features an orifice that rotates when the shock piston moves more than 2", automatically adjusting the ride quality. The bonded iron 14mm piston is micro-polished and double-chrome plated for durability. The piston and sealing rings are Teflon coated for high wear resistance. Twin tube construction allows the shock to run cooler while protecting the internals from off-road obstacles. The shocks are mounted with durable polyurethane bushings and each shock includes a black shock boot.
This kit includes bump stop extenders to lengthen the bump stops. This is to ensure that the coil springs don't over compress. The Rugged Ridge 2" lift kit for the Jeep Wrangler includes detailed installation instructions and it's backed by a limited lifetime warranty.
Rugged Ridge® is a division of Omix-Ada, the leader in Jeep replacement parts. Based in Suwanee, Georgia, Rugged Ridge was begun almost two decades ago when the enthusiasts at Omix-Ada decided that even a vehicle as tough as a Jeep could be improved upon. Since then, Rugged Ridge has created over 500 accessories to improve your Jeep’s performance, utility and appearance. Unlike parts made for ordinary vehicles, Rugged Ridge knows that every part made for a Jeep must uphold the Jeep tradition of strength and capability, so every part is designed, tested, manufactured and tested again to make sure it’s perfected. Then and only then can it be installed on your Jeep.