Ford Mustang 2001, 57 Series Generation II Air Intake Kit by K&N®. This kit improves airflow into your engine. It includes a K&N air filter and a custom designed air intake tube. The K&N filter increases the airflow and the intake tube smoothes that airflow into the engine. The result is more horsepower and torque, and better acceleration you can feel. Street legal in all States.
- Guaranteed to increase horsepower and improve acceleration
- Custom designed and engineered for each application
- Works with OEM computer system
- Includes the world's best air filter, the K&N filter
- Easy to install
- Street legal in all States
- Up to 100,000 miles between servicing
- Million Mile limited warranty
The K&N 57 Series Generation II Air Intake Kit improves intake airflow from the air filter all the way to the throttle body. The system starts with the world famous K&N high flow air filter. K&N uses the largest conical shaped air filter that will fit in the engine compartment. The large increase in filter area over the stock airbox filter results in a huge increase in airflow and a greater capacity to capture and hold dirt.
The filter is attached to a precision molded intake tube that connects the filter to the throttle body. The tube is precisely designed to reduce turbulence and accelerate airflow into the engine. The rotationally molded intake tube is made from interlaced high density Polyethylene, reducing intake air temperature from similar metal tubes. Intake air temperature is further reduced by a heat shield that isolates the filter from the engine compartment. The reduction in air intake temperatures results in a cooler, denser air intake charge and even more horsepower.
K&N uses a dynamometer to design its air intake kits to make the most horsepower possible. But their power figures aren't based on just one vehicle, but rather an average of runs by a number of vehicles. This means repeatable numbers and horsepower claims you can count on.
Every 57 Series Generation II Air Intake Kit comes complete with everything necessary for installation, including comprehensive installation instructions. All adapters are manufactured from high quality materials such as steel, aluminum, silicon or reinforced nylon, to ensure long life. The K&N filter can go up to 100,000 miles before cleaning is required. And the K&N air filter is guaranteed for one million miles.203.55 259.33
Brand: K&N Part Numbers:
K&NŽ is the inventor and leading innovator of reusable cotton gauze filter technology for automotive applications. The first K&N filter was conceived for racing over 40 years ago and a performance enthusiast mindset continues today throughout all levels of the company. K&N is the sales and brand leader for performance filters, including an extensive line of factory replacement filters and performance air intake kits. The company actively promotes the environmental, economical and performance advantages of long-life reusable cotton gauze filters.K&NŽ - 57 Series Generation II Air Intake Kit Reviews (10)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Customers' rating: 4.5 OF 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYGood| Posted by Christine L. | 2012 Ford F-150 (Perth, WA)
The product works good. Installed easy, with good instructions. Disappointed with K&N sending out a product with plastic screw in breather pipes adapters. I replaced them with brass fittings from the local Auto shop. Also, the thread where the fittings go, had excess chrome. Paul, Australia.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYExcellent| Posted by Marcos M. | 2013 Ford Edge (Elmhurst, NY)
It was very easy to install, nice sound under the hood. But still not seen difference with the gas, I think I'm using more gas with the air intake than without this well. I've to be checking all the time with this but looks like gas is going away faster than before... the performance is awesome.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Ford Edge Cold Air Intake System| Posted by Ronald B. | 2013 Ford Edge (Clarksville, TN)
The instructions were too the tee, everything matched and everything fit perfect. No problems at all, so if u have a 2011-2013 Ford Edge, this product will fit perfect, and it only took me and my dad about 45 mins to install all hoses and mass air flow and nipples. Everything fit perfect and the car gas mileage went up 4.6 more miles a gallon and sound like a beast when I get on it. So, if you're looking for a cold air intake, this is the one you need. It's the K&N filter 77 series.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYK&N Intake| Posted by Mike E. | 2007 Ford Edge (Kelowna, BC)
The intake was very easy to install. All you got to do is follow the instructions that they give you. The heat shield was kinda of a pain to get in but it makes a big difference once its in, and whether or not it's sucking in hot or fresh air from the fender. I also bought a steeda intake throttle spacer which pushed it into the headlight a bit but it still fits. I was just thinking about cutting the intake pipe to make the filter not rest on the headlight housing. The steeda intake throttle spacer spacer is about an inch thick and if it wasn't installed the intake would fit perfectly.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYA Must Have| Posted by Francois B. | 2011 Ford F-150 (L'Orignal, ON)
Installed the K&N 63 Series on my Ford F-150 V8 5.0L. Easy to install. The sound of the engine is much better (sound deeper on acceleration). I cannot comment on fuel mileage improvement as I switch the tires to 33". I went for a long drive on the highway and the mileage is pretty much the same. So I guess it would have been worst without the K&N. Thumbs up to CARiD... Great price, great product and fast delivery. Special thanks to Jerry who helped me out a lot.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYK&N Intake - Ford Edge 2008 Limited| Posted by Karen H. | 2008 Ford Edge (Centennial, CO)
I recently installed this on my Ford Edge and what a difference it makes. I currently get .5 more MPG but I have only had it on a week so I will have to monitor it as time goes on. It adds pep to the car and adds a nice sound under the hood. The only negative comment I have is the painting on the intake was inside some of the screw holes and we had to "re-thread" the hole to finish the set-up so they could have been a little more careful with the spaying of the solver paint, but overall, it adds some nice eye candy under the hood. Other than that one issue, the install went very well.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYVery Nice!| Posted by Lionel P J. | 2011 Ford Taurus (Conyers, GA)
I purchased this product not really knowing what to expect on my 2011 Taurus. I must say that I am absolutely pleased with this product and the ease in which it went on. The way it sounds, and the increase in MPG; which by the way went up by 3 to 4 MPG on the highway, I can not tell a lie, I have yet to determine what I actually get in the city because I can't keep my foot off the throttle... It just sounds that darn good! Putting this product on did not cause my check engine light to come on which made me happy. In summary, know that I am the type of person that worries about check engine lights coming on, spending money for something that may not work like they claimed it does. But this here was worth every bit of money I spent on it.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY57 Series Generation Air Intake Kit (3.0)| Posted by Danny V. | 2004 Ford Ranger (Commerce, TX)
The Intake system you sold me works great. It has given my truck more pep and when I push on the footfeed, I not only can feel more power, but I can here it as well. Now I need some tuned header's and some dual exhaust and I'll be set. But right now, I would like to have some Chrome bed rails. DannyTVickWas this review helpful for you? YesNo
K&NŽ - 57 Series Generation II Air Intake Kit Reviews (10)View more 10 All K&N Air Intakes reviews >>