Jeep Wrangler 1999, Front Bumper by Pavement Ends®. Your Jeep’s factory bumper was designed primarily to meet highway regulations and not for the rigors of off-roading. But substituting an aftermarket off-road bumper can be an expensive proposition. Not so with the Pavement Ends Front Bumper. This rugged bumper has trail ready features like thick powder coating, angled ends for clearance, and fully welded D-Ring mounts, at an affordable price. Constructed from 3/16” thick stamped steel, this bumper is drilled for installation using the factory mounting location, and for an optional winch plate, and it comes in your choice of satin or matte black finish.
- A rugged off-road ready bumper at an inexpensive price
- 3/16” stamped steel construction for superior strength
- Narrow width and angled ends provide clearance for steep approach angles
- Open construction on back side allows for easy customization
- Drilled for installation using factory mounting holes
- Drilled for license plate and optional winch plate
- Two 1” thick D-Ring mounts fully welded on both sides of bumper
- E-Coat primer coat under thick powdercoating to resist scratches and corrosion
- Lights and other brackets can be added as needed
- JK bumper dimensions: 57”W x 6”H x 6”D
- TJ bumper dimensions: 50”W x 6”H x 4”D
- Comes with detailed instructions
- Limited 1-year warranty
The stock bumper on your Wrangler is made for occasional fender benders and warding off shopping carts. It’s too big and not rugged enough for tackling off-road terrain, and you can’t mount a winch or lights without difficulty. But don’t think you’re stuck with it because a quality trail ready bumper is too expensive. Pavement Ends can supply you with this tough, off-road caliber bumper at such a great price, that it’s also a great choice even if your Jeep never sees the dirt and you just need to replace a mangled stock bumper.
This bumper was designed to meet the needs of off-roaders, with a narrow width and angled ends that provide the clearance needed for steep approach angles. It has open construction on the back side, which allows for easy customization, and it’s manufactured from thick 3/16” stamped steel, with welded end caps, for toughness. It has two 1” thick D-Ring mounts that are fully welded on both sides of the bumper, for an ample foundation for pulling. Holes are pre-drilled to mount the bumper using the factory mounting location, for an optional winch plate, and the license plate. Lights and other brackets can be added as needed.
To stand up to off-road abuse and prevent scratches and corrosion, the bumper receives an E-Coat primer base before a thick layer of powdercoating is applied. Comprehensive, illustrated instructions are provided to guide you through an easy installation that should take less than an hour. The Front Bumper is backed by a limited 1-year warranty against defects in materials and workmanship.83.69 160.26
Brand: Pavement Ends Part Numbers:
Pavement Ends® is Bestop's most affordable brand line. Bestop has been making soft tops and Jeep accessories for 60 years, and that engineering and technology experience makes it way into all our products, even the lower priced Pavement Ends line.Product Reviews (2)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Pavement Ends® - Front BumperAverage Rating: 5 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYAll Pavement Ends Reviews(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2004 Jeep Wrangler | Posted by Gene | (Huntington, IN)
The Pavement Ends bumper is 100 times better than the standard OE bumper. It is a good heavy bumper. Installation was a breeze. It only took me 5 minutes to install. I would recommend this bumper to anyone looking for a quality bumper at a reasonable price. I am looking forward to buying the matching rear bumper soon!Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2005 Jeep Wrangler | Posted by Jimmy | (Orland Hill, IL)
This bumper is great! Very solid! Much heavier than the stock bumper. The shackle holes are convenient and really add personality to the front end. Shipping was actually two days earlier than they said, so that was good. Gave it four stars because when I opened it, the paint was slightly chipped on both ends. Overall, it's a great product with excellent value. I will recommend it to anyone.1 people found this review helpful.Was this review helpful for you? YesNoShare this review:
Product Reviews (2)
Product Reviews (2)
You will never pay more with CARiD! Not only will we match prices from any competitor's website or other reputable source, we will continue to honor that promise for up to one year after your purchase.
We'll match the price at time of purchase, or refund you the difference if done after the purchase. Either way, we are totally committed to providing you the best online shopping experience.
We're car and truck enthusiasts, just like you! And it's enthusiasts we hire in our Sales and Service Centers. Many of our staff are ASE certified and have spent years in the retail auto business.
We conduct our own in-house training, and we even bring vendors to us for hands-on product training demonstrations. You're getting true expertise when you phone or email us!
With hundreds of vendors, and tens of thousands of components for sale, we put tremendous effort into coordinating our data with our vendors' data in order to guarantee that you get the correct part.
Our huge database is regularly cross-checked to keep it current and optimized. At times, our thoroughness makes our data even more accurate than our suppliers! This rigorous process means that you can always order with confidence.