Dodge Ram 1500 / 2500 / 3500 3.9L / 5.2L / 5.9L 1994-2000, Direct Fit Stainless Steel Catalytic Converter by FlowmasterŽ, 2" Inlet / 2.5" Outlet. The new Flowmaster replacement catalytic converters are made to meet and exceed all federal environmental regulations and, as all Flowmaster products, to deliver the best possible performance. The shells are made of stainless steel, and the catalytic components meet or exceed the legal requirements.
Note: Flowmaster Replacement Catalytic Converters are not available for sale or use on vehicles registered in or operated in the state of California.
- Exceed all federal emission standards
- Stainless Steel shells
- High load of noble metals in substrate for reliable performance
- Efficient gas flow
- 25000 mile emission compliance warranty on internal components
- 50000 mile/5 year warranty on exterior casings
Flowmaster, the masters of performance mufflers and exhaust systems since 30 years, have decided to also offer street legal, high quality, replacement catalytic converters to the market. The catalytic converters are engineered for long life and reliable performance. When you install a Flowmaster Catalytic Converter you avoid the irritation that low quality converters can cause by frequently lighting up the MIL symbol on your dash, requiring equally frequent service appointments to check the codes and make the relevant adjustments. The Flowmaster converters are engineered and built in the U.S.A., using only first grade materials, to the high quality standard required to get the Flowmaster trademark stamped into the casing.
The outer shells are made in stainless steel of the highest automotive grade. The interiors of the converters feature strata that carry catalytic substrates with high loads of noble metals, making sure that the converters perform to exceed the USEPA standards. The strata themselves are of OEM or higher quality, ensuring that they last and can endure the vibrations and stress even in hard driving conditions. As Flowmaster is the master of gas flow, you can also rest assured that the exhaust gases flow through the converters with minimum possible restrictions for maximum possible performance. If and when you need to replace your catalytic converter, get a converter with the Flowmaster stamp. There is no better.247.98Brand: Flowmaster Part Number: 2030004 UPC: 700042027125
FlowmasterŽ has its roots in solving the engine noise problems encountered by California racers in the 1980s. In 1983 Flowmasters founder, Ray Flugger, created his first patented design of racing silencers, which dampened noise with minimal loss of power. Ray attached handles to ease carrying the square shaped race mufflers through the race pits, and the mufflers became known as the "suitcase mufflers." Today, the innovative Flowmaster mufflers are the result of years of development with top race engine builders, thousands of hours of dyno research and "real-world" on-track testing.FlowmasterŽ - Direct Fit Stainless Steel Catalytic Converter Reviews (10)Customers' rating: 4.5 OF 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYFlowmaster Exhaust| Posted by George S. | 2004 Dodge Ram (Long Valley, NJ)
Looks and sounds good. Installed with ease, the hardest part was removing the old exhaust from the cat. Had to upgrade the clamps, the clamps supplied with the kit were too small. I welded the exhaust as recommended by Flowmaster. Put the dual exhaust on my Dodge Ram, Hemi runs and sounds great.Was this review helpful for you? YesNo(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYFlowmaster American Thunder 50| Posted by Eric W G. | 2003 Dodge Ram (Martinsburg, WV)
Shipping was on time with what I was Quoted. The directions that came with the system were good. Had one problem with the spacer between the cat and the Flowmaster muffler. The down size was wrong. We made a small adjustment and modification to make it work. The quality and sound is great.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYThe Sound of a V8, the Way it Should Be| Posted by Guy D. | 2013 Dodge Ram (Edmonton, AB)
This muffler is a true direct fit and is very easy to install. It has 3 chambers so it is not the most aggressive Flowmaster but it does sounds aggressive under heavy acceleration. It is quiet however at low RPM. My only issue is when the HEMI is on 4 cyl mode, there is a very noticeable drone sound. As for increase in performance, it is noticeable instantly. There is definitely an increase of torque throughout the power band. Accelerations are much better now.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYFlowmaster's American Thunder| Posted by Rachid A. | 2013 Dodge Ram (Port Royal, SC)
The Flowmaster exhaust sounds great on my truck, it gives the aggressive sound, and it was very easy to install too. It took me about 1hr to complete it. My 2012 Dodge Ram Rt sounds great, with it I get more mpg.Was this review helpful for you? YesNo(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYFlowmaster 50 Series Muffler.| Posted by Daniel B. | 2007 Dodge Ram (Albuquerque, NM)
The customer service and product quality are both everything that I expected. However, I did have some difficulty with fitment. In my situation, it was not a simple plug and play situation. That's where my local muffler shop got involved. Other than that, I love the products and will continue to shop here.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYExcellent Experience| Posted by Steve W. | 2011 Dodge Ram (Yarker, ON)
Product was received in a timely manner and was exactly as advertised. Installation was even easier than stock, as the left side tail pipe is designed in 2 pieces as opposed to the 1 piece factory pipe. This made it simple to install over and around the axle and spare tire. I did this installation on my garage floor without the use of a hoist and had it completed in about an hour.Was this review helpful for you? YesNo(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYGreat!| Posted by Rodney F. | 2000 Dodge Ram (Beach Park, IL)
System fits well, although the extension pipe from the converter to the muffler is not long enough and I had to buy a piece of pipe and a reducer to complete the installation. Also the add described the system being stainless steel, rather aluminized pipes.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYFlowmaster American Thunder| Posted by Mark A. | 2007 Dodge Ram (Colorado Springs, CO)
The Flowmaster was very easy to install on my 2007 Dodge 1500. It took me about 2 1/2 hrs to install. The difference in how the truck runs and throttle response is amazing. I would recommend this product to anyone. And the help I received from the live help was great, it made it very easy.Was this review helpful for you? YesNo
FlowmasterŽ - Direct Fit Stainless Steel Catalytic Converter Reviews (10)View more 10 All Flowmaster Exhaust Systems reviews >>